EMOS ZM3231 LED Wall Luminaire plus PIR Sensor Instruction Manual

June 4, 2024
EMOS

EMOS ZM3231 LED Wall Luminaire plus PIR Sensor Instruction Manual
EMOS ZM3231 LED Wall Luminaire plus PIR Sensor

Inductions

Dimension
Inductions
Inductions
Inductions
Inductions

Inductions
Inductions

LED luminaire is designed for indoor use to be mounted on a solid base.
Ingress Protection: IP54 – suited for both indoor and outdoor use.

Mounting

Mount the luminaire firmly onto a solid basis, for example a wall.
Connect the power cord to the mains 230 V~.
Connecting conductor must not be connected to the mains at time of installation. This operation can be carried out only by an authorized person.
Mounting Instruction
L – brown – live wire
N – blue – neutral wire

PIR sensor – specification

  • Time-delay: min. 10 s ±5 s – max. 5 min ±1 min
  • Detection angle: 120°
  • Ambient luminaire: 10 lux ‒> 2 000 lux (adjustable)
  • Detection distance: 1–10 m
  • Detection motion speed: 0.6–1.5 m/s

PIR sensor setting:
Detection field is possible to be set by moving the motion sensor switch to the left and to the right.

Adjustment of the ambient luminaire (sensitivity)

You can choose at what luminosity will the sensor go on by a button A (see picture no. 5).

Time-delay

You can set the time-delay of the luminaire by a button B (see picture no. 5)

WARNING

  • Luminaire is suitable entirely for fixed mounting.
  • The luminaire can be connected only to the electric distribution network, whose installation and protection complies with the applicable standards.
  • Before any manipulation or servicing of the luminaire disconnect the luminaire from AC power. This operation can be carried out only by an authorized person.
  • In case of any damage to any part of the luminaire, don’t use it.
  • LED chips inside the luminaire are not replaceable.
  • Don’t change inner wiring of the luminaire.
  • In case of broken cover don’t use the luminaire and replace broken cover with new one immediately.

EMOS spol. s r.o. declares that the LED wall light is in compliance with the essential requirements and other relevant provisions of Directive. The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download.

This product contains a light source of energy efficiency class F.

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substanoes may reach groundwater and subsequently food chain, where it could affect human health.

Servis: EMOS SI, d.o.o., Rimska cesta 92,
3311 Šempeter v Savinjski dolini, Slovenija
tel: +386 8 205 17 21
e-mail: reklamacije@emos-si.si

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals