ZEEVA SP-0235 Dual LED Wireless Speaker Instruction Manual

ZEEVA SP-0235 Dual LED Wireless Speaker

Thank you for purchasing the DUAL LED Wireless Speaker.
This manual provides more information about this wireless speaker, please read the instructions before using.

Product Overview

Wireless Speaker

1. USB Type-C Charging Port

2. LED Indicator

3. On/Off/Mode Button

4. Volume Up/Next Song Button

5. Volume Down/Previous Song Button
   Charging Dock

6. USB Type-C Charging Port

7. LED Indicator

Package Contents

• Dual LED Wireless Speaker 2.36in. x 2.2in. x 2.36in.(6cm x 5.6cm x 6cm) each
• Charging Dock 6.3in. x 3.15in. x 0.6in. (16cm x 8cm x 1.52cm)
  (One) Charging Cable 19.7in. (50cm) / 1(One) Instruction Manual

Power On/Off

• Power on: Press and hold 2 seconds on the On/Off Button.
• Power off: Press and hold 4 seconds on the On/Off Button.
• Note: Always power off the speaker when not in use.

Pair Wireless speaker with your mobile device

1. Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
2. Power on the wireless speaker.
3. Activate the Bluetooth function on your phone within range and select “SP-0235 SPK” from the list shown.
4. You will hear a beep sound when pairing is successful.

Reconnect Wireless speaker to your mobile device
When powered on, the wireless speaker will automatically connect with the last successfully paired device.

Charging your Wireless speaker

For your safety, please always use appropriate 5V output charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.

1. Use the USB Type-C charging cable provided with this wireless speaker.

2. Connect the USB Type-C plug to USB Type-C port on the charging dock, then connect the USB plug to the USB port on a computer or wall adapter.
   The LED Indicator on the Charging Dock will always on.

3. Place the wireless speaker on to the charging dock to begin charging.

4. The LED Indicator on the wireless speaker will turn red while charging and will turn off once fully charged.

Charging your Wireless speaker without Charging Dock

1. Use the USB Type-C charging cable provided with this wireless speaker.
2. Connect the USB Type-C plug to USB Type-C charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
3. The LED Indicator will turn red while charging and will turn off once fully charged.

NOTE

• You must select a qualified charger from a regular manufacturer.
• You must charge the Wireless speaker if it has been not used for more than 6 months.

CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product.
USB Type-C Charging Cable rating 5V/1A Max.

Bluetooth Mode

• Short press On/Off Button to Play or Pause the music.
• Long press the Volume Up or Down Buttons to switch to next or previous track.
• Short press the Volume Up or Down Buttons to tune the volume.

TWS Mode

1. Turn On both wireless speakers.
2. Disconnect both wireless speakers from any Bluetooth device.
3. Keep both wireless speakers on the Charging Dock or side by side.
4. Press and hold 2 seconds on the On/Off Button on ONE of the wireless speakers. And then it will have an alert sound.
5. The wireless speaker will connect with the other wireless speaker in few seconds. When successfully connected, both wireless speakers will have another alert sound.
6. Now you can follow the “Pair Wireless speaker with your mobile device” to pair with the mobile device.
7. To disable the TWS mode, press and hold 2 seconds on the On/Off Button on ONE of the wireless speakers. They will have an alert sound and then disconnected.
   NOTE: TWS mode is not supported in FM mode.

Change to FM Radio Mode

• Short press the Power Button twice to change to FM Radio mode.
• Short press the Power Button three times to scan channels.
• Long press the Volume Up or Down Buttons to switch to next or previous channel.
• Short press the Volume Up or Down Buttons to tune the volume.
• Short press the Power Button twice again to change to Bluetooth mode.

NOTE: Plug-in the USB Type-C Charging Cable will improve the FM Radio’s sensitivity.

Technical specification

• Driver Diameter: 45 mm
• Impedance: 3.2 Ohms
• Power Supply:
• Li-ion Battery 3.7V 200 mAh
• Playtime: 1.5-2 Hours
• Charging Time: 1.5-2 Hours
• Bluetooth Range: 32.8 Feet
• Bluetooth Version: 5.3
• USB Type-C Charging Cable Included
• FM Radio Mode

FAQ

If the Wireless speaker cannot be paired with your device, please try the following:
Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated.

If the Wireless speaker cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered.

Safety instructions for the lithium battery and charging the product

• The input voltage to the product is DC 5V 1A.
• In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/adapter for charging the product.
• Only charge the product at ambient temperatures between 10°C/50°F and 40°C/104 °F.
• Do not heat above 70°C/158°F, eg. Do not expose to sunlight or throw into fire.
• Switch off the product after use.
• Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
• In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference.
   (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 1616 Holdings, Inc. is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>