Lonnovix L8 Native 1080p Auto Focus Projector User Manual
- June 16, 2024
- Lonnovix
Table of Contents
Lonnovix L8 Native 1080p Auto Focus Projector
Important Safety Instructions
Read all instructions before you use this product.Do not make any changes or
create settings that are not described in this manual. If physical injury,loss
of data, or damage is caused by failure to follow instructions, the warranty
does not apply.
Setup
- Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
- Do not place this product on soft surfaces such as tablecloths or carpets, otherwise, the product could be a fire hazard.
- Do not place this product in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.
- To prevent over heating,do not block or clog the ventilation openings.
- Never place this product in a confined space. Always leave enough space around this product for ventilation.
- Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments.
- When this product is running for a long period of time,the surface may become hot. If this occurs, shut it down immediately and unplug the charger. Resume operation after the product has cooled down.
- Always handle this product with care. Avoid touching the lens.
- Do not allow children to handle the product without supervision.
- Do not place heavy or sharp objects on this product.
- To avoid electric shock, do not disassemble the product.
- Avoid extreme vibrations as they may damage the internal components.
- Please ensure you use only the adapter offered by the manufacturer. Using an unauthorized adapter may be dangerous and violate the Terms of Use and product warranty.
- Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used),abide by professional ethics,pay attention to safety obligations,and strictly prohibit the use of our products or equipment for any illegal purposes.Our company will not be responsible for any violators legal liability under any circumstances.
What ‘s Included
Overview
Remote Control
Getting Started
Projector Installation
The projector can be placed on the tabletop,or hanged on the ceiling for both
front or rear projection. You can use the screw at the bottom of the projector
for better adjusting the image when placing on the table.
Placement Tips
Front tabletop placement
Horizontal Placement Tips
The recommended projection distance is about 8ft with around 80″, The image
size depends on the distance between projector and screen,there may be
3%Deviation among above listed data.
Ceiling Mounting
Tips: 1. Purchase an universal projector mount for ceiling mounting;
2.Remove the four rubber pads at the bottom of the projector,the screw holes
appears,then use the M5*11mm screws to install.
Preparing The Remote Control
For first time use,remove the protective tab and insert a new battery
positioning the polarity(+/-)as indicated.(For safety issue,battery not
included)3.4.Power On /Off Slide right of the Lens Cover,Plug in the AC power
cord,press and hold the power button for 2 seconds or use the remote control
to power it on/off.
Auto Image Correction
Auto image correction includes auto focus,and auto keystone correction. These
features can be enabled:by pressing on the remote F+,F-Button, slightly moving
the projector,Also to set your auto image keystone correction preferences, go
to>[Settings]>[Projector Image Settings]>[Multidirectional Auto Correction]
Using Your Projector
Select the Input Source
Lonnovix L8 projector has 1xHDMI port,2xUSB ports and 1×3.5mm aux port,select
the correct sources to connect to your devices (Laptop,TV Stick,USB
Disk,PS5,DVD Player etc)
Play via USB Sources
Insert the USB disk into either of the two usb input ports. 2.Go to the Home
page,select the input sources of USB. 3.Select the desired file (or enter the
subfolder)in the USB disk,then press the[OK]button to play it. 4.3.HDMI
Sources(Recommended)
Use the included HDMI cable to connect the project or to computer,gamecon
soler,set-top box and other devices that support HDMI output. Go to the home
page and choose the HDMI Sources
Sources
Go to the home page and choose the AV Sources 2.Use the AV cable to connect
the projector with DVD,set-top box and other devices that support AV output.
How to connect to TV Stick
Connect the TV Stick to power by using the USB cable. 2.Plug the roku or tv
stick to the HDMI port of the projector. 3.Go to home page and choose HDMI
Sources on the projector.
WiFi and Screen Mirroring Setup
WiFi Connection
[Settings]>[WiFi Settings]>Select the wifi network available,enter the
password
For Apple Device
Apings win Seng slake sure that the projector and mobile phone are connected
to the same WiFi net work.The steps of the mobile phone are as follows.
Step 2: Select une evide ceo casted oy the control center and tap Screen
searched device name.
Notice: Due to HDCP Protocol, Netflix, Hulu, Prime cannot be casted, Use
HDMI,or USB sources to connect to Laptop,Fire TV Stick or Roku tv to stream
the contents, any question,feel free to contact us at
support@uslonnovix.com.
For Android Device
- Go to the homepage,select “Miracast”.
- Turn on the android device,go to phone [settings]to find [More connections].
- Click on [wireless projection],search for and connect to “Lonnovix L8”,make sue the projector and mobile phone are connected.
How to connect to external speakers/soundbar
This projector can also be connected to external sound output devices,
including headphones and speakers: Connect me ine able the came t the A port
on is propal speakers. You will hear audio from your headphones or external
speaker.
Projector Image Settings
Digital Zoom Setup
- Press [Settings]on the remote>[Projection Settings]>turn off [Multidirectional Auto Correction]>[Zoom in/out]
- Auto/Manual Horizontal &Vertical Keystone Correction [Settings]>[Projection Settings]>Turn on [Multidirectional Auto Correction],for manual keystone adjustments,turn off the auto keystone correction accordingly.
- Picture and Color Settings Reminder:Picture can be only adjusted when connected to USB driver or HDMI Sources.
- Connect to HDMI Sources or Insert USB Stick.
- Select “Menu”on the remote.
- Adjust picture brightness,contrast saturation under different selected picture mode.
Trouble-shooting
Blurry Image
Slightly move the projector or press F+/F-on the remote to start autofocus,or
adjust the projection angle and direction as well as the height of the
projector if necessary.
How to watch Netflix,Hulu,Disney+etc?
Due to HDCP Protocol,Netflix,Hulu, Prime video cannot be wirelessly casted,
Use HDMI,or USB sources to connect to Laptop,Fire TV Stick or Roku tv to
stream the contents,any question,feel free to contact us at
support@uslonnovix.com.
How to Play Videos without Wi-Fi
Download videos to a USB drive in FAT32 format.Insert the usb drive into us
port and select the sources to USB.
No HDMI Signal
Connect your projector with another HDMI playback device. Connect the HDMI
playback device to your TV with an HDMI cable to check if the device or cable
are working.
Warranry &Contacts
Lifetime Customer Service,Email us at
Support@uslonnovix.com anytime. 30-Day Money-
Back Guarantee for Any Reason. You may return your undamaged product and
packaging within 30 days of purchase to receive a FULL REFUND for any
reason.If the reason for the return isn’t quality-related, the customer must
pay for the return shipping.
Get in touch with us via below contacts to extend EXTRA +1 Year Warranty. If you came across any issue, Before returning it, please give us a chance to provide you with satisfactory solutions,scan below QR code to contact with us to get solutior within hours. We will strive our best to make you have the most happy experience from Lonnovix.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>