Bauknecht WM Pure 9A Washing Machine User Manual

Bauknecht WM Pure 9A Washing Machine User Manual

Tools Required

Installation

SAFETY INSTRUCTIONS

Before using the appliance, read these safety instruc-tions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls. Very young children (0-3 years) should be kept away from the appliance. Young children (3-8 years) should be kept away from the appliance unless continuously supervised.

Children from 8 years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. Never open the door forcibly or use it as a step.

PERMITTED USE

CAUTION

The appliance is not intended to be operated using an external switching device, such as a timer, or a separate remote-controlled system. This appliance is intended to be used in households and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels, bed & breakfasts and other residential environments and areas for communal use in blocks of flats or launderettes. Do not load the machine above the maximum capacity (kg of dry cloth) indicated in the programme table.

This appliance is not for professional use. Do not use the appliance outdoors. Do not use any solvents (e.g. turpentine, benzene), detergents containing solvents, scouring powder, glass or general-purpose cleaners, or flammable fluids; do not machine wash fabrics that have been treated with solvents or flammable liquids.

INSTALLATION

The appliance must be handled and installed by two or more persons – the risk of injury. Use protective gloves to unpack and install – the risk of cuts. If you want to stack a dryer on top of your washing machine, first contact our After-Sales Service or your specialist dealer to verify whether this is possible. This is only possible if the dryer is attached to the washing machine by means of Another stackina kit available through our IMPORTANT TO BE READ AND OBSERVE After-After-sales service or your specialist dealer. Move the appliance without lifting it by the worktop or top lid.

Installation, including water supply (if any)  electrical connections and repairs must be carried out by a qualified technician. Do not repair or replace any part of the appliance unless specifically stated in the user manual. Keep children away from the installation site. After unpacking the appliance, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service. Once installed, the packaging waste (plastic, styrofoam parts etc.) must be stored out of reach of children – the risk of suffocation. The appliance must be disconnected from the power supply before any installation operation – risk of electric shock. During installation, make sure the appliance does not damage the power cable – risk of fire or electric shock. Only activate the appliance when the installation has been completed.

Do not install your appliance where it may be exposed to extreme conditions, such as poor ventilation, or temperatures below 5 °C or above 35 °C. When installing the appliance make sure that the four feet are stable and resting on the floor, adjusting them as required, and check that the appliance is perfectly to level using a spirit level. ! If the appliance is being installed on wood or “floating” floors (certain parquet and laminate materials), secure a 60 x 60 x 3 cm (at least) sheet of plywood to the floor then place the appliance on connecting the water inlet hoses) to the water supply by the regulations of your local water company.

For cold fill-only models: do not connect to the hot water supply.

• For models with hot fill: the hot water inlet temperature must not exceed 60 °C.
• The washing machine is fitted with transport bolts to prevent any possible damage to the interior during transport.
• Before using the machine, the transport bolts must be removed. After their removal, cover the openings with the 4 enclosed plastic caps.
• After installation of the device. wait a few hours before starting it so that it acclimates to the environmental conditions of the room.
• Make sure that the ventilation openings in the base of your washing machine (if available on your model) are not obstructed by a carpet or other material.
• Use only new hoses to connect the appliance to the water supply. The old hose-sets should not be reused.
• The supply water pressure must be in the 0.1-1Mpa range.

ELECTRICAL WARNINGS

It must be possible to disconnect the appliance from the power supply by unplugging it if the plug is accessible, or by a multi-pole switch installed upstream of the socket by the wiring rules and the appliance must be earthed in conformity with national electrical safety standards. Do not use extension leads, multiple sockets or adapters. The electrical components must not be accessible to the user after installation. Do not use the appliance when you are wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug or if it is not working properly. or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly qualified persons to avoid a hazardous risk of electric shock.

CLEANING AND MAINTENANCE

WARNING
Ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation; never use steam cleaning equipment – risk of electric shock.

DISPOSAL OF PACKAGING MATERIALS
The le syncing material is 100%6 recyclable and is marked with The various parts of the packaging must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.

DISPOSAL OF HOUSEHOLD APPLIANCES
This dopant is manufactured with rec date or materials Por porter in main element camera retelling picture tan reine 2 l Waste Betal and BetoniesEquipment (Wett). By ensuring this product is disposed of correctly. you will help prevent negative consequences for the environment and human health. The symbol E on the product or the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic equipment.

Download PDF:Bauknecht WM Pure 9A Washing Machine User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>