Bauknecht WM Pure 8A Washing Machine User Manual
- June 14, 2024
- Bauknecht
Table of Contents
Bauknecht WM Pure 8A Washing Machine User Manual
Required Tools
Installation
SAFETY INSTRUCTIONS
These safety instructions before use read through. These instructions for Keeping references easily accessible. In these instructions and on the device itself important safety instructions are given, which you should always pay attention to. The manufacturer assumes no liability for non-compliance with these safety instructions, for improper use Using the device or for incorrect Operation settings. Babies and small children (0-3 years) must device should be kept away.
Younger children (3-8 years) must be kept away from the device unless they are constantly supervised. The device may be used by children aged 8 and over as well as people with reduced physical, sensory or mental abilities and lack of experience and knowledge only under supervision or after sufficient instruction from a person responsible for their needs Person responsible for safety is used become. Children are not allowed to play with the device. Children are not allowed to use the device without it Clean or maintain supervision. Never open the door with force do not use this as a running board.
PERMITTED USE CAUTION
The device is not intended for use with an external switching device, e.g. B. a timer or a separate remote control. This device is for household applications and similar applications are designed, for example: Employee kitchens in retail, offices or other work areas; Guest houses; for guests in Hotels, motels, bed and breakfast applications and other residential environments; Areas for Shared use in apartment blocks or Laundries.
The washing machine does not exceed the maximum Capacity (kg of dry clothes) loaded specified in the program table. This device is not suitable for professional use. Use the device not outdoors. No solvents (e.g. turpentine, benzene), Detergents that contain solvents Scouring powder, glass or all- purpose cleaner or use flammable liquids; none with Solvents or flammable liquids Wash treated textiles in the washing machine. INSTALLATION For transporting and installing the device Two or more people are required – Risk of injury. Protective gloves for
Unpack and use for installation – the risk of cuts. If the dryer on the washing machine should be stacked, ask our team Customer service or your dealer to see if this is possible. Stacking the dryer on top of the Washing machine may only be used special, from customer service or dealer available stacking set. Move the washing machine without turning it on the worktop or the lid. The installation, including the water connection (if available) the electrical connection and any repairs, may only be carried out by one be carried out by a qualified technician. Do not repair or replace the device yourself Do not remove any parts if this is the case User manual not expressly provided. Keep children away from the installation site hold. Check after unpacking the device that it is not during transport was damaged. If problems arise please contact your dealer or Customer service.
After installation you need Packaging waste (plastic, Styrofoam parts, etc.) kept out of the reach of children – the danger of suffocation. The device in front Installation works from the power supply disconnect – the risk of electric shock. Make sure the power cord is not included in the installation damage to the device itself – fire or Risk of electric shock. Do not start the device until the setup is completed. Do not set up the device in places where there are extremes that could be exposed to conditions such as bad Ventilation, and temperatures below 5°C or above 35°C.
When installing the device, ensure that the four feet rest firmly on the floor, adjust accordingly and Check that the device is level is completely flat and stable. If the device is on wooden floors or “floating” floors (certain parquet or Laminate materials) is installed, one Plywood sheet with a size (of at least) 60 x 60 x 3 cm on the floor and that Then place the device on this. The water inlet hose/the Water inlet hoses taking into account the regulations of the local waterworks Connect water supply. For models with cold water inlet only: Do not connect to the hot water supply.
For models with hot water inlet: the hot water inlet temperature must not exceed 60 °C exceed. The washing machine is included and Equipped with transport locking screws possible damage inside the washing machine prevent during transport. Before The washing machine must be put into operation Be sure to remove the transport locking screws become. After removing the, seal it Screw the openings with the 4 included Plastic caps.
After installing the device, a few hours wait before putting this into operation, so that it adapts to the environmental conditions of the can get used to the room. Make sure the ventilation slots are at the bottom of the washing machine (if on your model present) not through a carpet or anything else Material is clogged. Only connect the device with a new hose Connect the water supply. The old Hose sets should not be reused. The supply water pressure must be in the MPa Range from 0.1-1.
You may use components and assemblies of the machine only repair or replace if necessary is expressly permitted in the operating instructions. Only use authorized aftermarket Sales customer service. Yourself or not Professionally carried out repairs can dangerous incidents with life or death health- threatening consequences and/or cause serious material damage. Spare parts for household appliances are provided by the European Ecodesign Regulation for ten Years after the last device was offered on the be available on the market.
NOTES ON ELECTRICAL
It must be possible according to the wiring rules be to unplug the device or it with a circuit breaker that connects the socket is connected upstream. The device must be Consistent with national electrical must be grounded according to safety regulations. Do not use extension cables, Multiple plugs or adapters. After installation Live parts must not be accessible to the user be more accessible. Do not use the device in wet conditions Condition or use barefoot. The device doesn’t use if the power cord or plug is damaged if it is not working properly when dropped or in has been damaged in any way. If the power cord is damaged, it must be turned off Safety reasons from the manufacturer, from his Customer service representative or similarly qualified specialist with an identical cable replaced – the risk of electric shock.
CLEANING AND MAINTENANCE WARNING
Before performing Maintenance work, ensure that the device is turned off and unplugged is separated. To reduce the risk of personal injury avoid wearing protective gloves (risk of cuts) and safety shoes wear (risk of crushing); definitely for two transport (reduce load); no Use of steam cleaning equipment (Risk of electric shock). Not professional and not Repairs authorized by the manufacturer can be carried out poses a risk to health and safety, for which the manufacturer cannot be held liable can. Any defects or damages as a result will not occur professional repair or maintenance work are not covered by the warranty conditions stated in the documents, which are supplied with the device.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and supports this Recycling symbol.
Therefore, do not simply throw away the packaging material; dispose of it by
applicable local regulations.
DISPOSAL OF HOUSEHOLD APPLIANCES
This device is made from recyclable or reusable materials materials
manufactured. Dispose of the device according to regional regulations and
Waste disposal regulations. More detailed information about the Treatment,
disposal and recycling of electrical household appliances is available from
the local authority, garbage disposal or dealer, from which the device was
purchased. This device is under the European Waste Electrical and Electronic
Equipment (WEEE) Directive 2012/19/EC marked. By disposing of waste correctly,
you contribute to environmental protection and avoid the risk of accidents
resulting from improper disposal of the product.
The symbol on the device or the enclosed Information materials indicates that this device is not normal household waste, but rather a suitable collection point for electronics and electronics Old electronic devices must be disposed of. For Germany, the Electrical Act regulates the return of electrical devices even more far-reaching. Old devices can be returned to the local recycling centre free of charge will be given. The law provides additional free return options for electrical and electronic goods Waste electronic devices in the trade: For products that you purchased directly, we offer the optional Taking back your old device upon delivery of the new device freight forwarder.
Return to electronics stores with a sales area of at least 400m² Return in grocery stores with a sales area of at least 800m² if they regularly offer electrical appliances for sale. Returns via mail order. One applies to large household appliances with an edge length of over 25cm 1:1 return – you can buy an old device of the same type when you buy a new one hand back. It is also available for small devices with an edge length of up to 25cm a 0:1 return obligation – devices cannot be returned to you New purchase bound. Please delete personal data on the device storage media before disposing of the device. they are obliged lamps; Batteries and accumulators must be disposed of separately, if these can be removed from the device non-destructively.
Download PDF:Bauknecht WM Pure 8A Washing Machine User Manual