Voerou NAH001 Sleep Headphone Instruction Manual

**Voerou NAH001 Sleep Headphone Instruction Manual

**

Lifetime Warranty

Customer Service Email: Joseche828@gmail.com

Feature

• 5.2 Bluetooth Version. Compatible withany Bluetooth enabled devices.
• Built-in microphone for answering phone.
• Hand- washable after removing the Bluetooth modules
• Lifetime Warranty and 24 hours friendly customer service.

Specifications

• Model: PTLO1/LAH001/OEBO1/NAH001
• IC: 28103-PTL01/29106-LAS0129091-JOS01/29105-VES01
• FCC ID: 2A4HN-PTLO1/2A4HR-LAH001/2A4HU-VOEBO12A4HR-NAHO01
• Charge Input: 5V/0.1A
• Charging Time: 1.5-2 hours
• Working Time: 9-12 hours

Package Included

• Sleep Headphones Headband x1,
• Charging Cable x1,
• User Manual x1,
• Customer Service Card x1

Warning:Do not attempt to power on or connect the device while charging. The Bluetooth transmitter is disabled while it is charging,thus you will not be able to connect while charging.

If the battery overheats during charging, please disconnect the charging cable in time, stop charging, and contact our after-sales customer service.

Function Summary

1. LED Status Light
2. Volume Down/ Next Track
3. On /Off /Play /Pause /Answer
4. Volume Up /Previous Track

Control

How to connect?

1. Turn on Bluetooth on device.

2. Turn on the sleep headphones headband

Press power button for 3 seconds until red and blue lights blink. On your device, go to Bluetooth settings and choose BT-FAAH.

3. Connect to Bluetooth(Name: BT-FAAH) on device

When turned on, the sleep headphones headband will automatically connect to the last connected device if available. If no previously paired device detected, it will keep pairing mode.

Warning: Only one Bluetooth connection is allowed, if user want to connect to another device, please make sure to cancel the previous device.

Warning : Do not attempt to power on or connect the device while charging. The Bluetooth transmitter is disabled while it is charging,thus you will not be able to connect while charging.

Devices Name: BT-FAAH

CHARGER AND BATTERY

Slide cable out through the slit to connect to USB. Before using a different charger, check whether the specifications of the charger meet requirements. The recommended output voltage of the charger is DC5V+/-0.25V, and the recommended output current is 100 mA to 500 mA. A higher charging voltage may damage the device. Do not use the sleep headphones headband while charging. Please do not charge for a long time to avoid overheating or damage to the lithium battery. The sleep headphones headband will charging with any USB-C cable. Connect the USB-C cable to USB charger (or computer USB port).

• Please try to restart your device if the headphones headband keep cutting out.
• If you hear a low volume when you connect for the first time, try to adjust the volume key on your phone or tablet.

How to use the headband answer calls?
Please select agreement for the first time use.

Step 1:
How to sync volume with phone?

Step 2:

How to rename?

Want to connect with a new phone.
How to prevent automatic connection with last used phone?

Please note that you MUST remove the control panel & speaker before washing the sleep head phones headband.

1. Push Bluetooth control panel with speaker outof its pocket

2. Pull speaker and bluetoo th panel out from Separated stitching of the headband

3. Take out and put them separately

4. Hand wash availabel

• Do not expose sleep headphones headband to liquid or moisture.
• Do not store sleep headphones headband near acidic or alkaline material.
• Do not keep sleep headphones headband close to the fire. Do not tumble dry.
• Please remove the Bluetooth module before washing. After completely dried, put back to their original position.
• The speakers can be adjustable, you can adjust it to the best place until they fit for your ears!
• Please charge the sleep headphones headband when you receive it.
• Please turn off Bluetooth function to save power when not working.
• Please note that a ‘DI DI DI’ sound will be heard when reaches max/min volume level.
• Please try to restart your device if the sleep headphones headband keep cutting out.
• lf you hear a low volume when you connect for the first time, try to adjust the volume keyon your phone or tablet.

For warranty service or support,Please contact our Service Team, Fulext promises: FREE RETURN.FREE REPLACEMENT or FULL REFUND to solve your issue and make you satisfied.

Customer Service Email: Joseche828@gmail.com

IC Caution:

Radio Standards Specification RSS-Gen,issue 5

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference. This device must accept any interference,including interference that may cause undesired operation of the device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be usedin portable exposure condition without restriction.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be usedin portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>