TECKNET TK-WD808 Plug Through Wireless Doorbell with AC USB Sockets User Manual
- June 14, 2024
- TECKNET
Table of Contents
TECKNET TK-WD808 Plug Through Wireless Doorbell with AC USB Sockets User
Manual
Product Overview
Precaution
Do not connect and use the doorbell socket with high-power electrical
appliances, such as bread machines, microwave ovens, ice machines, vacuum
cleaners, etc.
Package Contents
- 1x Doorbell Transmitter
- 1x Doorbell Receiver
- 1x Double-Sided Adhesive Tape
- 2x Screws
- 2x Plastic Anchors
- 1x User Manual
Product Overview
-
Transmitter
-
Receiver
Specifications
Receiver Power Supply: AC 100-240V
USB Output: DC 5V 2.4A, 12W
Receiver Working Power: <0.5W
Transmission Power: -12.23dBm
How to Use
- “ ” Press the music button once to play the next chime and select the one you like. Press twice to go back to the previous chime.
- “ ” Press the volume button each time to adjust the 5 volume levels. (Mute/Low/Medium/High/Max)
How to Pair
Note: This device is already paired.
If there is any disconnection or short-range issues, please follow the instructions below.
Press and hold the receiver’s pairing button “ ” for 3 seconds until the receiver makes a “Ding-Ding” sound. Then press the transmitter bell push, then the receiver makes a “Ding” sound meaning pairing between the transmitter and receiver is successful. The receiver will make another “Ding-Ding” sound to exit the pairing mode.
Install the Transmitter
A. Double-sided Tape Installation
Use the included double-sided tape to stick the transmitter to the wall.
B. Screw Installation
-
Use a small standard screwdriver to detach the back plate.
-
Screw mount the back plate on the wall using a Phillips screwdriver.
-
Snap the transmitter onto the back plate.
Maintenance
- In order to protect the precision internal electronic components, it’s advisable that unqualified users should not attempt to open the unit for maintenance.
- Do not expose to continuous direct sunlight or humid environment – this will adversely affect the unit.
- Correct use of the products helps to effectively extend the service life of the unit.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.
- SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion may occur.
- Do not place the product in or near any inflammable, explosive or hazardous object.
- The doorbell is waterproof to some extent, but it still needs some protection so that it can function normally, so please do not place it in or near water, rain, excess moisture, or extreme heat.
- Do not operate the product with damaged cord or plug.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
Limited 12-Month Warranty
What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.
What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the
TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-WD808 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>