LENRICH LBK109-22-1 iPad 10th Generation Case with Keyboard User Manual

LENRICH LBK109-22-1 iPad 10th Generation Case with Keyboard

Schematic diagram

USING

1. Open the protective case
2. 180 degrees rotate the protective case
3. 360 degrees rotate
4. Adjust the rotation axis angle

Installation and removal

1. Removing back protective piece. Hold the Tablet PC on both sides (picture) and gently push the back cover of the Tablet PC with the thumb (back piece held in place by two tabs.)
2. Proceed to “peel” the cover away from the Tablet PC
3. Take the Tablet PC out
4. Take the Tablet PC out upwards

Keyboard

Welcome
Congratulations on your selection for this wireless Bluetooth keyboard case. This ultra-slim keyboard case is manufactured with the highest quality materials to complement your Tablet PC. This is an ideal accessory for transportation, working, and much more!

Overview

Note: Please keep pressing the Fn key first and then press other keys if you want the following functions.

• fn+C : Turn on Bluetooth pairing
• fn+Space: Open/close the control panel
• control+Space: Switch input method
• command+tab: Switch recently opened APP

1. Low battery alarm.
2. 30 seconds without a key press, the backlight will be off automatically.
3. 10 minutes without a key press, the keyboard will sleep into power saving mode.
4. The backlight function will be off automatically when it is low battery.
5. Three levels of backlight brightness: low-medium-high-off.
6. Press ( ) to adjust the color.
7. Seven colors backlight. (green-blue-white-yellow-purple-cyan blue-red)

Meaning to LED light colors

• Blue LED blinking: Pairing
• Red LED on: Charging
• Green LED on: Battery is fully charged
• Green LED blinking: Low in Battery
• White LED on: Caps lock

Charging

Recharging the keyboard

1. The keyboard charging port is a TYPE-C charging port, the input of the voltage can not exceed DC-5, and the keyboard will be broken if the voltage exceeds the limit.
2. Connect the TYPE-C plug of the charging cable to the keyboard charging socket, the other side is connected to the charger of the tablet PC or the charging interface of the tablet PC charges the keyboard.
3. Please charge it for at least 3hours before using it for the first time and then charge it for at least 2 hours when it is a low battery in the future.
4. The green indicator light flashes low battery, please charge it on time. The red indicator light on the battery is charging. The green indicator light is on: the battery is full

Touch Setting Instruction

Before pairing and connecting, please upgrade the tablet’s system to OS 13.4 and above

Tablet Bluetooth connection

1. Turn on the Bluetooth keyboard, move the button to “ON”, indicator lights up.
2. Turn on the iPad Bluetooth, “Settings=>Bluetooth=> turn on Bluetooth”, then press fn+C on the keyboard and Bluetooth pairing will appear, look for and connect to the “Bluetooth Keyboard”. After the connection is successful, you can use the keyboard to enter and chat.
3. The keyboard and touchpad will enter sleep mode to save power after 10 minutes without any operation. if you want to wake up the keyboard, you need to click any keys on the keyboard first, then you can operate the keys and touchpad.
4. When the keyboard power is low, the green indicator light will flash and the keyboard backlight will turn off automatically then it can not turn on again; the touchpad may be Unusable, please charge it before using it.

Touch simulation operation instructions

Troubleshooting

If the keyboard is not working with the Tablet PC (or other Bluetooth devices) make sure:

1. The Bluetooth function on the tablet PC (or other Bluetooth devices) is enabled.
2. The Bluetooth keyboard is within 33 feet of the tablet PC.
3. Check whether the Bluetooth Keyboard connection is selected correctly
4. Restart your device.
5. Make sure the keyboard is charged, recharge if low.
6. If the pairing between the keyboard and tablet PC is failed or the wrong character and typing is delayed. Please do pairing again with the following procedures:
   • Delete all the Bluetooth devices on the tablet PC
   • Switch off the Bluetooth function on the tablet PC
   • Reboot the tablet PC
   • Switch on the Bluetooth function on your tablet pe and pair it again

Product Specifications

1. Transmit Range: up to 10 meters
2. Range of Frequency: 2.4 GHz Spectrum
3. Operating Voltage: DC 3.7 V (powered by Li-ion)
4. Operation current: < 5 mA
5. Standby current: 1.0 mA
6. Sleep current: < 0.1 mA

This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any interference that may cause undesired operation.

CONTACT

Seller support Contact

• sales@lenrich.com.
• www.lenrich.com.

Caution: To properly operate this product, please read the user manual thoroughly.

NOTE:

• Before pairing and connecting, please upgrade the tablet’s system to OS 13.4 and above
• The keyboard and trackpad will be asleep after 10 minutes without any operation.
• Please press any key to wake up the keyboard when you need to operate the keys and trackpad.

WARNING:

Documents / Resources

| LENRICH LBK109-22-1 iPad 10th Generation Case with Keyboard [pdf] User Manual
LBK109-22-1, LBK109-22-1 iPad 10th Generation Case with Keyboard, iPad 10th Generation Case with Keyboard, 10th Generation Case with Keyboard, Generation Case with Keyboard, Case with Keyboard, Keyboard
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>