Hoyichy V20 1200mAh Rechargeable Fabric Shaver User Manual

Table of Contents

Hoyichy V20 1200mAh Rechargeable Fabric Shaver

Hoyichy V20 1200mAh Rechargeable Fabric Shaver

First lay the dry clothes on a horizontal surface and flatten the wrinkles on the clothes.
Short press the Power/Gear button and repeat press it to select gears I, II, Ill according to the clothing materials.
Fit the product perfectly to the clothing and move it back and forth (it is recommended that the angle of them should be 90° for a better trimming effect).
After use, repeat press the Power/Gear button to shut down, open the dust storage cover, remove the fuzz and pills, install the cover and store the product in a cool and ventilated place.

*You must turn the product off before removing the mesh cover or dust storage cover in case of causing danger.

Power/Gear button:

Short press it to turn on the product.
Repeat press it to switch gears including gear I–>gear 11–>gear Ill, The corresponding icon will always be displayed.
Repeat press it again to turn off the product.

There are sharp blades inside the product, do not put the product in a place where children can reach it or use it as a toy, otherwise it will cause harm to children;
Do not insert fingers or metal objects into the blade, which may cause damage to the machine or injury to personnel;
Non-professionals are not allowed to dismantle the machine, repair; refit or replace the battery by themselves to avoid danger.
Before use, the clothes must be tiled to prevent wrinkles, to avoid damage to the clothes during working;
Please do not use the lint remover to treat the clothes on your body, to avoid damage to the body and clothes;
Please make sure that the product is turned off when charging, and do not place it in a hot and humid place for charging;
Before use, please install the back cover on the machine body correctly;
Do not use until the battery is completely discharged, it is recommended to charge at any time before use.

Put the clothes flat first, and pay special attention to the following positions when removing the lint and pills:
Please stop use the lint remover if any abnormalities and faults.
please deal with it according to the type of fault, and contact customer service for aftersales maintenance if necessary. Hassle free lifetime customer service with quick response within 24 hours.
Note: This product cannot be used on down clothing!

Please connect the included USB charging cable to the product and the following USB power supplies (USB charging connector, mobile phone charger connector; portable power bank, USB vehicle connector, USB interface for computer or notebook).
Power Adapter with DC 5V/1A is recommended for safety.
When charging, the working icon will flash.
When fully charged, the working icon will stay on.
After charging, please be sure to unplug the power supply to avoid long charging time to reduce battery life.
*The product must be fully charged after unpacking! This product must be charged when it is turned off! The charging cable must be unplugged before starting up.

After use, please turn off the product, remove the dust storage cover in the direction indicated by the cover, and pour out the debris.
Use a dry rag or a semi-dry non-dripping rag to wipe the body of the machine, and use a small brush to sweep the debris inside the machine to prevent excessive debris accumulation and stuck blades.
After cleaning, install the dust storage cover and keep the product in a cool and dry place.
If it is not used for a long time, it is recommended to charge once every six months.

Fault Phenomenon	Exclusion method
The product does not work

Fuzz and pills cannot be completely removed|

Product cannot be charged|

Read User Manual Online (PDF format)