Q13 0606 Wireless Earbud Bluetooth 5.2 Headphones Deep Bass User Guide
- May 15, 2024
- Q13
Table of Contents
Q13 0606 Wireless Earbud Bluetooth 5.2 Headphones Deep Bass
Table of Product Contents
Product Specification
Introduction
How do I pair two headphones with my phone?
Please make sure both the earbuds and the charging case are fully charged before first use.
Step 1
Take both earbuds out of the charging case and both earbuds will power on and
start pairing automatically (If the earbuds are not connected to your device
for more than 5 minutes, the earbuds will automatically turn off Press the MFB
button for about 3 seconds to manually turn on the earbuds when prompted
“Power on”.) The indicator light of one earbud will flash white and green
alternately, and the indicator light of the other earbud will slowly flash
white when paired successfully.
Step 2
Enable the Bluetooth pairing mode on your phone device, search and select
“Q13” to connect. (You should hear a voice prompt “Connected” when wearing
earbuds). If the indicator light of the earbud is off, it means the phone is
connected.
Automatic connection
By default, the earbuds will connect to the last paired phone automatically
when powered on.
Prompt
- If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps.
- These earbuds can be used not only together, but also individually
- If you want to use a single earbud Just take one earbud out of the case and connect it to your phone. or when using two earbuds, manually turn off one earbud or put one back in the charging case and you’ll be able to use the other earbud alone.
Functions
Telephone Communication
For Music
Charging
Earbuds Charging
The earbuds will only be charged when you place them in the charging slots
correctly. (You can charge the charging case and the earbuds at the same time,
or you can charge the charging case first and then the earbuds.) When the
earbuds are charging in the charging case, the digital display bar of the case
will keep blinking and turn off when the earphones are fully charged.
Case Charging
There is a Type-C usb charging cable in the package, please use it to charge
the case directly. During charging, the digital display will flash and display
the battery level in real-time. When fully charged, the number shows 100.
Charging Alerts
- After using it for a long period, due to the oxidation of the magnet connector, the earbuds might not be charged or even turned on.
- You can fix this problem by cleaning the magnet connectors on the earbuds and charging case with an alcohol wipe
- Put the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start charging automatically.
- The earbuds will connect to the last paired phone automatically.
Storage and Maintenance
- If the earbuds have not been used for more than 3 months, we recommend that you charge them.
- Please use a charger approved by the FCC (Federal Communications Commission).
- Children aged 12 and under require adult supervision.
- Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
- Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.
Frequently Asked Questions
Q: Why don’t these earbuds pair with my phone?
A: Make sure the earbuds are fully charged and powered on.
- Make sure your phone’s Bluetooth is enabled
- If there is no problem with the two points stated above, turn off the powered-on earbuds after 5 continuous and quick clicks.
- Put them back into the charging case and close the lip, wait for 1 minute, then open the charging case and reconnect the earbuds to the phone.
Q: Why does the music cut in or out?
A: First, keep the earbuds no more than 10m away from your phone (no
obstacles). If the distance is less than 10m, follow these steps:
- Put the earbuds back into the case and close the lid, manually click “forget the Q13” on your phone
- After 10 seconds, open the charging case and reconnect these earbuds with your phone
Q: Why the earbuds still won’t be charged or disconnected from the phone
after I put them in the case and close the lid?
A: Make sure the charging case is not in a low battery state.
If the charging case is in a low battery state, the earbuds will neither be
charged nor disconnected. In this case, please use a type-c charging cable to
fully charge the case.
Q: Are these earbuds sweat- and water-resistant?
A: These earbuds are sweatproof and slightly waterproof.
- For electronic devices, we do not recommend that you submerge the earbuds in water.
- For more detailed product FAQs, please contact our customer service.
Activation & Warranty
Permanent replacement of damaged, defective, upgraded or missing items (no
need to return the original) Please activate via email below within 15 days.
motastservice@gmail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>