HomeSpot NS003P Bluetooth Adapter Pro for NSwitch User Guide
- June 6, 2024
- HomeSpot
Table of Contents
HomeSpot® NS003P Bluetooth Adapter Pro for NSwitch User Guide
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by HomeSpot® is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Package Contents
About your HomeSpot NS003P
LED Indicators
Initial Setup
Headphones Pairing
- Insert the HomeSpot NS003P into the NSwitch USB-C port.
- Turn on the NSwitch and go to the Home Menu.
- NS003P is ready for pairing with headphones once the Headphones LED indicator is fast blinking.
- Make sure the headphones is ready for pairing and bring it close to the NS003P.
- NS003P will automatically search and pair with the headphones.
- Once connected with headphones, the Headphones LED indicator will be On and the aptX LED indicator will be On if the paired headphones supports either aptX or aptX Low Latency.
Smartphone Pairing
7. Press the RX button.
8. NS003P is ready for pairing with smartphone once the Smartphone LED
indicator is fast blinking.
9. Turn on Bluetooth function on the smartphone, search for and pair with
“HomeSpot NS BTA Pro”.
10. Once connected with smartphone, the Smartphone LED indicator will be On.
Subsequent Use
- Insert the HomeSpot NS003P into the NSwitch USB-C port.
- Turn on the NSwitch and go to the Home Menu.
- Press the TX Button to re-connect to the previously paired headphones.
- Press the RX Button to re-connect to the previously paired smartphone.
Pair a New Headphones
- Insert the HomeSpot NS003P into the NSwitch USB-C port.
- Turn on the NSwitch and go to the Home Menu.
- Make sure the NS003P is not connected to any headphones.
- Press and hold the TX Button for 3 seconds until the Headphones LED indictor starts fast blinking.
- Follow step 4 to 6 of Initial Setup.
Pair a New Smartphone
- Insert the HomeSpot NS003P into the NSwitch USB-C port.
- Turn on the NSwitch and go to the Home Menu.
- Make sure the NS003P is not connected to any smartphone.
- Press and hold the RX Button for 3 seconds until the Smartphone LED indictor starts fast blinking.
- Follow step 9 to 10 of Initial Setup.
Factory Reset
- Power off the Nintendo Switch. Hold down the power button for several seconds, then select “Power Options”→”Turn Off”.
- Insert the HomeSpot NS003P into the NSwitch USB-C port.
- Power on the NSwitch and go to the Home menu.
- Make sure the NS003P is not connected to any headphones and smartphone.
- Press and hold the TX button for 10 seconds until the aptX LED flashes.
- Press and hold the RX button for 10 seconds until the Mic Mute LED flashes.
- Proceed to the Intial Setup procedure to set up headphones and smartphone pairings.
Game Audio + Mobile Voice Chat
- Connect both headphones and smartphone to NS003P.
- Start voice chat app on smartphone.
- Maintain a close distance (within 1 m) to the NS003P Internal Mic for optimal voice chat quality.
- If the Internal Mic Mute LED is On, press the TX Button to turn it off.
Game Audio + Mobile Music
- Connect both headphones and smartphone to NS003P.
- Start audio or music app on smartphone.
- Use the Mixer Level Controls to adjust mixing proportion of NSwitch and phone audio.
Game Audio + In-Game Voice Chat
- Connect headphones to NS003P.
- Enable voice chat in the game settings.
- Maintain a close distance (within 1 m) to the NS003P Internal Mic for optimal voice chat quality.
- If the Internal Mic Mute LED is On, press the TX Button to turn it off.
Game Audio Only
- Connect headphones to NS003P.
- Use the Master Volume Controls to adjust the headphones volume level.
TV Mode
Product Specifications
Safety Instructions
- Do not use this device in medical facilities, aircraft, refueling points, close to automatic doors, automatic fire alarms or other remotely controlled devices.
- Keep this device at least 20 cm from pacemakers and other medical devices as Bluetooth signal may interfere with their operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>