BlueLink Breaburn Universal Programmable Smart Wi-Fi Thermostat User Guide

: June 7, 2024
: BlueLink

Table of Contents

Wire and Install Thermostat
Set-Up for Connection
Login and Register
Enter Network Information (works with 2.4 GHz networks only)
Complete Setup Process
Changing Your Wi-Fi Settings
Record Network Information for Future Reference
Documents / Resources

Wi-Fi Setup Guide

BlueLink Breaburn Universal Programmable Smart Wi-Fi Thermostat Cover
2
Model 7205
Universal Programmable Smart Wi-Fi Thermostat
Leave this Setup Guide with thermostat.
7205-105-02

Wire and Install Thermostat

Properly wire and configure thermostat. Refer to the Installer Guide.
Refer to the User Manual for programming and maintenance.
NOTE: Wi-Fi works without common (C) wire on most systems; requires common on Heat Pump, Heat Only or Cool Only Systems
Helpful videos can be found at www.braeburnonline.com.

Set-Up for Connection

Before beginning setup you will need to:

Know your Wi-Fi network name and password
Have a valid e-mail address
Get the FREE app

Apple® Devices:
Download the BlueLink Smart Connect® application from the Apple® App Store

Android™ Devices:
Download the BlueLink Smart Connect® application from the Google Play Store

Desktop Computer:
Once connected, you can access the app on a desktop PC by visiting bluelinksmartconnect.com/bluelink.

Open the BlueLink Smart Connect App. Select REGISTER and enter a valid e-mail address.
Enter the thermostat serial number. You can locate this number on the back of the thermostat or on the enclosed thermostat registration card. NOTE: If you removed the thermostat to locate the serial number, make sure to reconnect it before selecting ENTER.
Complete the remaining registration screens. Once you reach the Create Account screen, select REGISTER.

Enter Network Information (works with 2.4 GHz networks only)

Enter your network name (SSID) and password, select ENTER.
NOTE: The network name and password are case sensitive fields.
The application will now instruct you to put the thermostat into Wi-Fi connect mode.

Complete Setup Process

Follow the Prompts within the App to :

Enable Wi-Fi on thermostat
Connect to thermostat
Complete setup

Adding Additional Thermostats
Once the app is set up and registered, it’s easy to add additional thermostats to your existing account.

Log into the app
Select “Update Thermostats”
Select “Add New”
Follow the prompts in the app to add additional thermostats.

Changing Your Wi-Fi Settings

First Clear Your Thermostat Wi-Fi Settings

Press and hold the RETURN button for 4 seconds.
The display will change showing the first User Option.
Press RETURN until you see the word WIFI in the display.
Press the button until WIFI CL appears.
Press RETURN to exit and clear all Wi-Fi settings.

Then Update Your App Settings

Open the app and select Update Account.
Enter your account password.
Select Wi-Fi Settings.
Select the thermostat you wish to change.
Choose WI-FI Network or WI-FI Password and select Enter.
Update the information and select Enter.
NOTE: To complete setup, follow the instructions in the app.

Record Network Information for Future Reference

Network Name (SSID) __
Network Password __
Thermostat Serial Number # _____
You may need this information later or if calling for support. Visit www.braeburnonline.com for helpful videos.

Braeburn Systems LLC
2215 Cornell Avenue · Montgomery, IL 60538
www.braeburnonline.com
844-BLU-LINK (844-258-5465) (U.S.)
630-844-1968 (Outside the U.S.)
©2020 Braeburn Systems LLC · All Rights Reserved.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. All other trademarks are the property of their respective owners.
7205-105-02

Documents / Resources

| BlueLink Breaburn Universal Programmable Smart Wi-Fi Thermostat [pdf] User Guide
Breaburn Universal Programmable Smart Wi-Fi Thermostat
---|---