WAVLINK WL-WN586X3-A AX3000 Wireless Dual Band Gigabit Mesh Router Instructions
- June 14, 2024
- WavLink
Table of Contents
- What should I do If you could not access some website or could not open
- After upgrading, please reset the device by pressing the reset button for
- What should I do if I could not get internet via wavlink device?
- What should I do if the wifi coverage is not as expected?
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WAVLINK WL-WN586X3-A AX3000 Wireless Dual Band Gigabit Mesh Router
What should I do If you could not access some website or could not open
some app?
Please try to download and install the latest firmware from our
website:https://www.wavlink.com/en_us/firmware.html?is_search=1&model=MIGHTY%20EX1
/WL-
WN586X3-A&id=209
After upgrading, please reset the device by pressing the reset button for 6s
and configure it again.
After upgrading, please reset the device by pressing the reset button for
6s and configure it again. Does the app provide any additional features than the web management page?
Remote control function is supported in the app, however you need to register a account and bind the cloud services.
What should I do if I could not get internet via wavlink device?
Such problem might be caused by many reasons, and they are shown as below:
- The user choose the wrong wan type in the router setting.
- There might be some problem with the modem.
- There might be some problem with the Ethernet cable which connect the wavlink device and the modem.
- The modem might block the wavlink device with mac filter.
And the user could try the steps below for troubleshooting.
Please try the steps below for troubleshooting.
- Please connect the modem to the pc via the same Ethernet cable and check if you could get internet. (To rule out the problem of the modem and the Ethernet cable)
- Try to change the wan type—DHCP, static ip or pppoe. If you are not sure, please contact us or the isp.
- If you could get internet via your old router or you could get internet when you connect the modem to your pc via Ethernet cable directly, please try to use the mac clone function to clone the mac address of the router or pc.
What should I do if the wifi coverage is not as expected?
- Try to upgrade the firmware from our website. After upgrading, please reset the device by pressing the reset button for 6s. (Firmware upgrading and resetting could solve many unexpected issue)
- Please make sure the antennas should be Unfolded.
- Please avoid obstacle between the wavlink device and the client. (The obstacle might affect the wireless signal much)
Customer Support
We will encourage customers to contact our technical support if they encounter any problems.
And we will be happy to help. Support team
Email: postsales@wavlink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>