Keychron K13 Pro Bluetooth Mechanical Keyboard User Manual
- June 14, 2024
- Keychron
Table of Contents
- K13 Pro Bluetooth Mechanical Keyboard
- IN THE BOX:
- QUICK START GUIDE
- Connect Bluetooth
- Connect Cable
- The ViA Key Remapping Software
- The Layers
- Activate Siri / Cortana
- Warranty
- Watch The Building Tutorial On Our Website
- Factory Reset
- K13 PRO BLUETOOTH MECHANICAL KEYBOARD OVERVIEW
- KEY DESCRIPTION
- LED STATUS OVERVIEW
- FUNCTION DESCRIPTION:
- Documents / Resources
K13 Pro
Bluetooth Mechanical Keyboard
K13 Pro Bluetooth Mechanical Keyboard
Search “white backlight” here to download the JSON file if VIA does not
automatically recognize keymap of the K13 Pro:
https://www.keychron.com/blogs/archived/k13-pro-factory-reset-and-firmware-
flash
VIA Software for macOS, Windows, Linux: https://usevia.app/#/
How to Use VIA on Your Keychron K Pro Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your-
keyboard
K13 Pro Source Code, please search “source code” on the product page on our
official website.
IN THE BOX:
Keychron K13 Pro Bluetooth Mechanical Keyboard x 1
Type-C Cable x 1
Manual x 1
Quick Start Guide x 1
Extra Keycaps Set x 1
QUICK START GUIDE
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Connect Bluetooth
Press fn + 1 (for 4 seconds) and pair with device named Keychron K13 Pro.
Connect Cable
The ViA Key Remapping Software
Please visit caniusevia.com to download the latest
VIA software to remap the keys.
If the VIA software cannot recognize your Keyboard, please reach out to our
support to get the instruction. (VIA only works when the keyboard is connected
by wire to the computer)
The Layers
There are four ayers of key settings on the keyboard. The layer 0 and layer
Lare for the Mac system. The layer 2 and layer 3 are for the Windows system.|
If your system toggle is switched to Mac, then the layer O will be
activated.| If your system toggle s switched to Windows, then the layer 2 will
be activated. Remember that f you are using it in Windows mode, please make
changes to the layer 2 instead of the top layer the layer O] This is common
mistake people are making.
---|---|---
| |
The Backiight
|
---|---
Adjust The Backlight Brightness
|
---|---
Activate Siri / Cortana
For Siri on Mac: Go to System preferences > Siri > select “Hold Command Space”
option.
Si key only works on macOS and does not work on 105,| For Cortana on Windows: Select Start > Settings > Cortana and select the shortcut by pressing Windows key + C key.
Windows Cortana is only available for Windows 10 and above OS. Cortana is only available in certain countries / regions and might not work everywhere.
---|---
|
Warranty
‘The keyboard is highly customizable and easy to be rebuilt.
If anything goes wrong with any of the keyboard components of keyboard during
the warranty period, we will only replace the defective parts of the keyboard,
not the whole keyboard.
Watch The Building Tutorial On Our Website
If you are buiding the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
-
Plugin the power cable and switch the keyboard to Cable mode.
-
Factory reset the keyboard by pressing fn + J +Z (for 4 seconds).
-
Download the right firmware and QMK Toolbox from our website.
-
Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the PCB.
-
Hold the reset key first, then switch the keyboard to Cable mode.
Release the reset key, and the keyboard will now enter DFU mode. -
Flash the firmware with the QMK Toolbox.
-
Factory reset the keyboard again by pressing fn + J + Z (for 4 seconds)
- Step by step guide can be found on our website.
K13 PRO BLUETOOTH MECHANICAL KEYBOARD SPECIFICATIONS
Number of keys: 90
Switch type: Mechanical
Battery: 2000mAh
Bluetooth working time (RGB): Up to 100 hours (Lowest brightness)
Charging time: Around 3 hours
Charging port: USB Type-C
Mode: Bluetooth / Wired
Bluetooth operating distance: Within 10 meters (open space)
Name of Bluetooth device: Keychron K13 Pro
Operating environment: -10 to 50°C
Technical specifications can be subjected to change without notice, we
apologize for any inconvenience caused.
K13 PRO BLUETOOTH MECHANICAL KEYBOARD OVERVIEW
-
Caps Lock Indicator
-
Bluetooth Indicator
-
Type-C Port
-
Bluetooth OFF Cable
(Mode Toggle Switch) -
Win/Android Mac/iOS
(05 Toggle Switch)
DEFAULT KEY LAYOUT:
LAYER 0: This layer will be activated when your keyboard’’s system toggle is
switched to Mac.
LAYER 1: This layer will be activated when your keyboard’s system toggle is switched to Mac and press the fn/MO(1) key.
LAYER 2: This layer will be activated when your keyboard’s system toggle is switched to Windows.
LAYER 3: This layer will be activated when your keyboard’s system toggle is switched to Windows and press the fn/MO(3) key.
KEY DESCRIPTION
Ser- | Screen Brghtness Decrease: |
---|---|
Serv | Screen Brightness Increase: |
Bright- | Backlght Decrease |
Brights | Backight Increase: |
Prvs | Previous |
play | Play/Pause. |
Next | Next |
Mute | Mute |
Vol- | Volume Decrease |
Vol+ | Volume Increase |
RGB Toggle | Torn Backight on/off |
RGBMd+ | RGB Mode Next |
RGEMd- | RGB Speed Increase |
Hues+ | Hue Increase. |
Hue- | Hue Decrease |
RGB SPI | RGB Speed Increase |
RGB SPD | RGB Speed Decrease |
mo(1) | Layer 1 willbe actvated when holding this ke |
Mot(2) | Layer 2 willbe actvated when holding this key |
Mo(1) | Layer 3 il be actvated when holding this key |
Mo(2) | Layer 4 willbe actvated |
when holding this key
BTH1| Bluetooth Host 1
BTH2| Bluetooth Host 2
BTH3| Bluetooth Host 3
LED STATUS OVERVIEW
LED Location | Function | Status |
---|---|---|
Battery indicator | Charging | Low battery – Blinking Red |
Charging – Static Red
Fully charged – Static Green
Bluetooth indicator|| Bluetooth| Pairing – Slow Blinking
Paired – Light Off
Switching – Fast Blinking
FUNCTION DESCRIPTION:
CHARGING
Plug the cable into a USB port and plug the other end into the keyboard
port. Charging Indicator:
When battery is below 15%, a red battery blinking indicator will be triggered.
A red light will stay on while charging; Fully charged in around 3 hours, a
green battery indicator will appear.
*The Keychron keyboard is compatible with all USB ports. Please use a 5V 1A adapter or USB 3.0 for the best performance. The Keychron K13 Pro can be charged in Bluetooth/on/off mode.
**This product supports up to 5V charging voltage and 1A charging current. We
are not responsible for any problems caused by improper charging.
BLUETOOTH / WIRED MODE (MODE TOGGLE SWITCH)
WIRED MODE
- Switch the toggle switch to the Cable option (it only works when a USB cable is plugged in).
- Connect our cable with your PC and keyboard.
- Backlighting will be turned on.
*Under Wired Mode, keyboard will not enter into Battery Saver Mode.
BLUETOOTH MODE
- Switch the toggle switch to the Bluetooth option.
- Backlighting will be turned on.
- Hold “fn+1” key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator fast flashes for 3 minutes to detect pairing).
- Search for the Bluetooth device “Keychron K13 Pro” on your device and connect it (the Bluetooth indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via key
combination ‘fn” + “1° / “fn” 4 “2/ ” + “3
*The Bluetooth indicator will continue to flash for 3 minutes.
**Slow or failed connections may exist due to different Bluetooth versions,
please make sure all the settings are correct.
SWITCH BLUETOOTH DEVICES
Short press key combination “fn” + “1″ / “fn” + “2″ / “fn” + “3″ to switch to
other device.
RECONNECT:
- Switch the keyboard to the Bluetooth option to activate the keyboard.
- The Bluetooth indicator flashes for 4 seconds and automatically pairs with the last paired device.
- If the Bluetooth indicator is off, press any button to enter the connection again.
*The keyboard must have been paired with the device to perform this function.
TURN OFF THE KEYBOARD
Switch the keyboard to the OFF option.
BACKLIGHT SETTING
- Short press to switch between different types of lighting effects.
- When backlighting is on, press button to switch among them.
OS TOGGLE SWITCH
1-MAC/iOS
Switch the toggle to Mac/iOS when the keyboard s connected to a Mac or iOS
operating system.
2 – WINDOWS/ANDROID
Switch the toggle to Windows/Android when the keyboard is connected to a
Windows or Android operating system.
“When using the Windows/Android mode, keys are used for “Windows” and “Alt”
functions.
3- INPUT METHOD SWITCH
Fori0s:
Input method switch: Ctrl + Space
Caps Lock: Caps (Enable General>Keyboards>Hardware Keyboard>Caps Lock Language
Switch)
For Android:
Input method switch: Shift + Space
NOTE: Functions of certain multimedia key may be disabled due to
compatibility, versions, brands and drivers of Windows/Android OS. We also
recommend ot to switch OS frequently as it may impact keyboard operations.
TROUBLESHOOTING
If unable to pair keyboard to device, confirm that the device you’re trying to
pair with is Bluetooth-capable. If so, restart the device and try pairing it
with the keyboard again.
Note: On a Windows computer, a new Bluetooth connection will sometimes require
additional software updates—a process that may still be ongoing after a
message appears indicating a successful completion. Wait at least 20 minutes
after pairing to make sure all updates are completed before restarting the
computer.
Confirm that the device is configured to accept Bluetooth connections
(Windows) and supports an external keyboard (HID profile).
Go to Bluetooth Devices > Open Settings and select the following:
Allow Bluetooth devices to find this computer
Allow Bluetooth devices to connect to this computer
Alert me when a Bluetooth device wants to connect
My keyboard isn’t working.
For the computer/smartphone:
Go to your device Bluetooth settings>Select the keyboard and
remove/delete/unpair it
Then restart your device.
For the keyboard:
Turn the keyboard off and back on. Then reconnect it to your device.
Bluetooth connection s interrupted even within 10 meters.
Check if the keyboard is resting on a metal surface that can interfere with
the Bluetooth signal.
Third-party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/Android O,
functions of third-party input tools may be affected while using the keyboard.
Please make sure your operating system and drivers are up to date.
Certain multimedia keys or function keys do not work.
Functions of certain multimedia keys may be disabled due to compatibility,
versions, brands, and drivers of devices.
*Multimedia keys:
Function keys:
Safety Precaution:
Keep the product, accessories and packaging parts out of the reach of children
to prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C(5°F) or above
S0°C(131°F) to preserve the lifespan of the keyboard.
Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
Support@keychron.com
@keychron
@keychron
@keychronMK
Designed by Keychron
Made in China
Documents / Resources
|
Keychron K13 Pro Bluetooth Mechanical
Keyboard
[pdf] User Manual
K13 Pro Bluetooth Mechanical Keyboard, K13 Pro, Bluetooth Mechanical Keyboard,
Mechanical Keyboard, Keyboard
---|---
|
Keychron K13 Pro Bluetooth Mechanical
Keyboard
[pdf] User Guide
K13 Pro Bluetooth Mechanical Keyboard, K13 Pro, Bluetooth Mechanical Keyboard,
Mechanical Keyboard, Keyboard
|
Keychron K13 Pro Bluetooth Mechanical
Keyboard
[pdf] User Guide
K13 Pro Bluetooth Mechanical Keyboard, K13 Pro, Bluetooth Mechanical Keyboard,
Mechanical Keyboard, Keyboard
References
- VIA
- VIA
- How to use VIA to program your keyboard – Keychron | Mechanical Keyboards for Mac, Windows and Android
- K13 Pro Factory Reset and Firmware Flash – Keychron | Wireless Mechanical Keyboards for Mac, Windows and Android
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>