BELL MX1050S Weatherproof Universal Flip Cover User Manual
- June 14, 2024
- Bell
Table of Contents
BELL MX1050S Weatherproof Universal Flip Cover
Introduction
The BELL MX1050S Weatherproof Universal Flip Cover is a versatile and durable solution designed to protect electrical outlets and switches from the elements. Crafted with high-quality materials, this flip cover ensures reliable performance in various weather conditions, making it an ideal choice for both indoor and outdoor applications. With its universal design, the MX1050S seamlessly integrates into different environments, offering a sleek and functional solution for safeguarding electrical components.
Specifications
- Material: Weatherproof and durable construction
- Compatibility: Universal design fits standard electrical outlets and switches
- Weather Resistance: Designed to withstand various weather conditions
- Installation: Easy to install with standard electrical boxes
- Color Options: Available in multiple colors to suit different preferences and settings
What’s in the Box
- BELL MX1050S Weatherproof Universal Flip Cover
- Mounting screws and accessories
- Installation instructions
Key Features
- Weatherproof Design: Protects electrical outlets and switches from rain, snow, and other environmental elements.
- Universal Compatibility: Fits standard outlets and switches, providing a versatile solution for different applications.
- Durable Construction: Crafted with high-quality materials to ensure long-lasting performance and reliability.
- Easy Installation: Comes with all necessary hardware and installation instructions for a hassle-free setup.
- Flip Cover Mechanism: The flip cover design allows easy access to outlets while providing protection when not in use.
CONFIGURING THE BASE
INSTALL UNIT
Turn off power to receptacle. Configure base as shown on other side. Back-out box screws. (Note: Make sure that box is flush or slightly behind the finished surface and that receptacle is flush with the finished surface in accordance with NEC 406.4 and 314.20.) Place gasket over the screws. Using keyholes, place base over screws and against gasket. Tighten screws. Do not over-tighten mounting hardware
CAUTION : Device must protrude through the base or duplex/round adapters. If not, please use UL approved spacers (not included) to move the device forward in the box.
Cover is Ul Listed for Vertical or horizontal installation
NOTE : Base should be installed on a smooth flat surface. To ensure a weatherproof seal on irregular surfaces such as brick or cedar siding, a 1/4 inch bead of nonhardening silicone caulk (not included) must be placed between the gasket and the mounting surface.
WARNING : Improper installation of any electrical device can cause serious injury or death.
How to Use
- Installation: Secure the flip cover over the electrical outlet or switch using the provided screws.
- Flip Mechanism: Lift the cover to access the outlet or switch when needed, and close it to protect against the elements when not in use.
- Remove Existing Cover: If there’s already a cover on the outlet, carefully remove it. Use a screwdriver to loosen and remove the screws holding the existing cover in place.
- Prepare the Area: Clean the area around the outlet to ensure proper adhesion of the new cover. Remove any debris, dust, or old sealant.
- Position the Cover: Place the weatherproof universal flip cover over the outlet, ensuring that it aligns correctly with the screw holes.
- Secure the Cover: Use the provided screws to secure the cover in place. Tighten the screws evenly to ensure a secure fit. Be careful not to overtighten and damage the cover or the outlet.
- Seal the Edges: Some weatherproof covers may have gaskets or sealing mechanisms. Make sure these are properly positioned to create a tight seal around the edges of the cover.
- Test the Flip Mechanism: If your cover has a flip mechanism, test it to ensure it opens and closes smoothly. This is important to maintain easy access to the outlet when needed.
- Inspect for Proper Installation: Once installed, inspect the cover to ensure it’s properly sealed and that there are no gaps that could allow water or debris to enter.
- Turn Power On: After installation and inspection, you can turn the power back on.
Safety Precautions
- Installation Instructions: Follow the manufacturer’s installation instructions carefully. Incorrect installation may compromise the effectiveness of the weatherproofing.
- Sealing and Closure: Verify that the cover has a secure and effective sealing mechanism. This is crucial for keeping out moisture, dust, and other environmental elements.
- Regular Inspection: Periodically inspect the cover for any signs of wear, tear, or damage. Replace the cover if you notice any issues to maintain its protective capabilities.
- Weather Resistance: Confirm the level of weather resistance the cover offers. Some covers may be water-resistant, while others may provide full waterproofing. Choose the one that suits your specific needs.
- Ventilation: If the cover is designed for electronic equipment, check for ventilation features to prevent overheating. Ensure that there are adequate openings for air circulation.
- Secure Fastening: Make sure the cover has secure fastenings to prevent it from being blown away or displaced during severe weather conditions
FAQs
What is the Bell MX1050S Weatherproof Universal Flip Cover?
The Bell MX1050S is a weatherproof universal flip cover designed to protect electrical outlets and switches from outdoor elements, ensuring safety and longevity.
Is the Bell MX1050S suitable for outdoor use?
Yes, the Bell MX1050S is specifically designed for outdoor applications, providing weatherproof protection for electrical outlets and switches.
What type of outlets does the MX1050S cover fit?
The MX1050S is a universal cover designed to fit standard electrical outlets, including duplex, GFCI, and Decora outlets.
Does the flip cover provide protection against rain and moisture?
Yes, the weatherproof design of the MX1050S ensures protection against rain and moisture, safeguarding electrical outlets in outdoor environments.
How does the flip cover operate?
The flip cover is designed to open easily when accessing the outlets and securely close to protect them from the elements. It flips up and down for convenient use.
Is the installation of the MX1050S cover easy?
Yes, the MX1050S is designed for easy installation. Follow the provided instructions to ensure a secure and weatherproof fit for your outdoor outlets.
Can the MX1050S cover be painted to match the wall color?
Yes, the MX1050S cover is paintable, allowing users to customize it to match their outdoor wall color or design preferences.
Does the MX1050S come with a lock for added security?
The MX1050S does not typically include a lock. It is designed for basic weatherproof protection and convenience in outdoor areas.
What material is the MX1050S Weatherproof Cover made of?
The MX1050S is constructed from durable and weather-resistant materials, providing long-lasting protection in outdoor conditions.
Is the MX1050S compatible with Decora-style outlets?
Yes, the MX1050S is designed to be compatible with Decora-style outlets, offering versatility for various outlet types.
Can the MX1050S cover be used in cold climates?
Yes, the MX1050S is suitable for use in cold climates, offering protection against snow, ice, and other outdoor elements.
What is the warranty for the MX1050S Weatherproof Universal Flip Cover?
The MX1050S may come with a limited warranty. Refer to the product documentation or contact the manufacturer for warranty details.
Video-Overview
Download This PDF Link:BELL MX1050S Weatherproof Universal Flip Cover User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>