STIRLING AP230 Air Purifier User Guide

: June 6, 2024
: STIRLING

Table of Contents

Installing the filters
Control panel
Using the air purifier
Give us a call
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide
Model: AP230
Let’s get your new air purifier ready to use!

This quick start guide contains basic instructions to get you started. For the full picture, please refer to the supplied manual which has comprehensive usage instructions and important safety advice.

Installing the filters

Before using the appliance, you will have to remove all packaging materials from the 3-in-1 filter set, which is fitted inside the appliance in its original wrapping.
Remove the rear cover of the appliance.
Take the packaged filtration system out of the appliance.
Remove all packaging materials from the filter components.
Reinstall the unpacked filtration system into the appliance.

STIRLING AP230 Air Purifier - Fig 1 STIRLING AP230
Air Purifier - Fig 2 Placement and connection

STIRLING AP230 Air Purifier - Fig 3 Place the air purifier on a dry, stable, horizontal, and level surface.
Do not use the appliance in an environment where oil is used or smoke is generated, such as in a kitchen!
5. For a better air purification effect, make sure to maintain a clearance of at least 30cm from walls or furniture and at least 50cm from electrical appliances.
Plug the appliance into a suitable electrical wall outlet and switch on power to the outlet.
Your air purifier is now all set up and ready for use.

Turn over the page for usage instructions …

Control panel

STIRLING AP230 Air Purifier - Fig 4

Using the air purifier

Now that you have set up your air purifier, follow the simple steps below and enjoy clean, pure air in your home.

6. Press the POWER button to turn on the unit. After a brief period, the air quality (PM2.5) indicator will come on, displaying the current state of your indoor air.
7. The PM2.5 indicator illuminates green when the air quality is good, orange when it is average, and red when it is poor.
8. Press the FAN button to choose your fan speed options: turbo, high, mid, low.
To set the unit into Auto mode, press the FAN button and hold it for three seconds. Then you can relax while the air purifier sets the correct air purification level automatically.

9. Once your air purifier is switched on, you can set a timer to switch it off automatically after 1 hour, 2 hours, 4 hours, or 8 hours.
10. For use during the night, you can set the unit to Sleep mode: the fan speed will change to low, and other indicator lights turn off. Press any button to exit Sleep mode; the unit will keep running at low speed but if there is no further operation within three seconds, it will return to Sleep mode.

11. You can enhance the air purification effect by switching on the ionizer function, which creates negative ions and discharges them into the air to help remove dust and other air pollutants by electrostatic attraction.

12. When it is time to clean or replace the filters, the Filter indicator will flash. Replace the filters following the instructions in the manual; new filter sets are available for purchase from our after-sales support center. After filter replacement, don’t forget to press and hold the ION button for three seconds for the counter to reset.

Give us a call

What? Do you mean this Quick Start Guide didn’t have ALL the answers? The manual has more comprehensive instructions, or speak to us. Call ours After Sales Support on 1300 886 649.
Well done, you made it! Now sit back and enjoy clean indoor air free of smoke, dust, odor, and other pollutants. Your new air purifier is automatically covered by a 3-year warranty.
V1.0