Futaba S3114 High-Torque Micro Servo Instructions
- June 14, 2024
- Futaba
Table of Contents
S3114 High-Torque Micro Servo
Futaba
S3 1 1 4 Micro Servo for Small Electric Powered Models |
*Specifications are subject to change without prior notice.
[RATINGS] Operating speed : 0.10 sec/60° at 4.8V
0.09sec/60%t 6.0V
Output torque : 1.5 kg-cm at 4.8V
(20.8 0z.”in. at 4.8V)
1.7kg-cm at 6.0V
(23.5 0z.in. at 6.0V)
eDimensions : 21.8 X 11 X 19.8 mm
(0.86% 0.43% 0.78 in.)
eWeight : 7.8 g (0.27 oz.)
USAGE PRECAUTIONS
The S3114 servo is a micro servo for small
electric powered models. Pay special attention to the following points.
-
Do not use S3114 servos with gas-power engine models, large
gliders or other models that require high torque. -
Using the supply voltage higher than 6.0V or applying high load to
the servo will shorten the life. -
Always use the servo horn specially designed for this micro servo.
Do not use conventional servo horns. -
Excessive force or shock to the servo horn may damage the ultra
mini precision gears inside the servo. -
Never connect a battery in reverse. Otherwise, it may cause fire on
the servo. -
To use a BEC battery for multiple servos simultaneously, be sure to
select the battery with a sufficient capacity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>