GoveeLife H7135QSG Smart Space Heater User Guide

Table of Contents

GoveeLife H7135QSG Smart Space Heater-product

Remove all packaging and ensure the air inlet and outlet are not blocked by foreign objects.
Do not use an extension cord. Only plug the heater directly into a 120V wall outlet.
Ensure the power plug is firmly inserted into the outlet. An abnormal outlet connection may cause overheating.
Place the heater on a firm, flat, and level surface free from obstructions and at least 3ft ( 1 meter) away from any wall or combustible materials.
(Optional) You can pull out the built-in stand to adjust the elevation. After that, place the heater properly with its air outlet facing upwards and producing heat.

Power Button
- Touch to power on or off.
  Note: The fan will continue working for 15 seconds after powering off to clear any residual heat.
Mode Button
Touch to cycle through Heat Setting I, , Auto Mode, and Fan Mode.
Timer Button
Touch to set a timer. Repeatedly touch Timer Button to set a timer from 1-7 hours. The heater will automatically turn off when the time is up. Long touch Timer Button for 2 seconds to turn off the timer.
Lock Button
- Touch and hold these two buttons simultaneously for 3 seconds to turn on the Lock Mode. When the lock is active, buttons on the panel will not respond when pressed. Touch and hold both buttons for 3 seconds to turn off the Lock Mode.
- Note : 6′ will flash when any other button is pressed to indicate the lock is on.

To download Govee Home App, scan the QR code or search for “Govee” in the Apple App Store® (iOS) or Google Play Store (Android).

Note

Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These permissions allow the app’s features to function normally and are not used to record personal, private information.
Due to ongoing updates, Govee Home App may be slightly different than shown in this manual. In case of any differences, always follow the in-a pp instructions.

Turn on your smartphone’s Bluetooth. Connect to your Wi-Fi router’s 2.4GHz network. 5GHz is not supported.
Android users turn on Location Services; 105 users choose Location ->Always On in the pop-up window while adding devices.
Note
- For 105 users, if you chose Location->Never, it might result in notifications/alert exceptions. It is recommended to follow Settings ->Govee Home ->Location ->Always On to obtain the best experience.
- Govee Home WILL NOT collect, use, or share your location in any way.
Open Govee Home App, tap the “+” icon in the top right corner and search for “H7135.”
Tap the device icon and follow the in-app instructions to complete the Bluetooth and Wi-Fi connection.

Note

Method to turn off Bluetooth and Wi-Fi connection: Press and hold the Power Button and Speed Button for Ss to restore the device to factory settings, then go to “My Devices” page on the app to delete this heater first, otherwise it cannot be added to the app again.
You can use Govee Home App to connect your heater to Amazon Alexa or Google Assistant. Follow the in-a pp instructions to connect to each voice assistant.