STARLINK Remote Control 2.0 Hearing Aid User Guide

: June 14, 2024
: Starlink

Table of Contents

QUICKTIP
Pairing
Use
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STARLINK Remote Control 2.0 Hearing Aid User Guide

QUICKTIP

Product Overview

Pairing

The Remote Control 2.0 must be paired to interact with compatible 2.4 GHz hearing aids on the Neuro Processor and Thrive platforms. Pairing occurs once, then the hearing aids and Remote will automatically recognize each other. The Remote can be paired within the fitting software or outside of the fitting software. Compatible 2.4 GHz hearing aids on the Neuro Processor or Thrive platform can be paired with one Remote

**Pairing within Pro Fit

Screen Display
**

Launch Pro Fit and connect hearing aids.
Select Accessories from the Preparation Session in Pro Fit or from the Flyout Menu .
Ensure the Lock switch is in the Unlock (up) position.
Place the hearing aids within six inches of the Remote.
Place the Remote in pairing mode by pressing the Favorite button for 5 seconds. The LED will rapidly blink.
Select to put the hearing aids into pairing mode.
Pairing is successful when the Remote image displays on the accessory screen.
Use the dropdown menu below the Remote image to set the Favorite button configuration.
Select pairing information for pairing instructions if needed.

Pairing within Inspire X

Launch Inspire X, connect and detect hearing aids.
Select Accessories on the left navigation bar.
Ensure the Lock switch is in the Unlock (up) position.
Place the hearing aids within six inches of the Remote.
Place the Remote in pairing mode by pressing the Favorite button for 5 seconds. The LED will rapidly blink.
Select Pair to put the hearing aids into pairing mode.
Pairing is successful when the remote image displays on the accessory screen.
Use the dropdown menu below the Remote image to set the Favorite button configuration.
Select the information icon for pairing instructions if needed

Pairing outside of the software

Power off any mobile phone or other accessories that were previously paired with the hearing aids.
Ensure the Lock switch is in the Unlock (up) position.
Power off, then power on the hearing aids to place in pairing mode.
Place the hearing aids within six inches of the Remote.
Press the Favorite button for 5 seconds. The LED will rapidly blink.
Once the LED turns solid for 2 seconds, both devices are paired.
The Remote will recognize if the fitting is monaural or binaural and pair one or two devices accordingly.

NOTE: Accessories only pair to hearing aid (not to iPhone/app)

Use

Volume: A short press of the arrows increases/decreases the volume. Streaming volume changes occur when streaming audio from any of the 2.4 GHz streaming accessories and iOS or Android streams.
Program/Memory : Cycles through all programs assigned in the fitting software.
Lock/Unlock: Unlock to make remote adjustments, Lock to prevent unintentional changes and to preserve battery life.

Favorite Button : Activates the feature assigned to the Favorite button. The Favorite button is configured within the fitting software and available options may include:
None : No effect on the hearing aids.
Home : Moves the hearing aids to the Personal/Normal program.
Stop/Start Audio Stream : Start or stop audio streaming from a 2.4 GHz streaming accessory.
Edge Mode+: Press to activate this feature designed to achieve the best sound instantly for the current environment. Press again to deactivate this feature. Neuro Processor hearing aids only
Comfort Boost: Press to optimize sound quality in noisy environments. Press again to deactivate this feature. Thrive Platform hearing aids only
Jump to Program/Memory 4 : Moves the hearing aids to program 4.
Tinnitus Stimulus On/Off: Start or stop tinnitus stimulus in the hearing aids