MINDSCOPE Animat3D Multicolored Fawny Instruction Manual
- June 4, 2024
- MINDSCOPE
Table of Contents
MINDSCOPE Animat3D Multicolored Fawny
- Power adapter not included, all USB power adapters are compatible (ie: mobile phone charger).
- Please do not open Fawny in order to avoid damaging the unit.
- Maintain adequate ventilation, do not cover the Fawny with objects such as cloth or other materials.
- Please keep Fawny away from direct rain, water or snow, covered porch outdoor setting is OK.
- Please disconnect/remove power source (USB cable) when not using for extended periods of time.
- Please do not disconnect the USB cable when Fawny is ON. Switch OFF and then disconnect the USB cable.
- Do NOT drop or shake the unit.
- Please ensure that Fawny is placed in temperatures within 20°F – 100°F
Still Mode:
Give Fawny a decorative look by entering into still mode. Jack will not run
any animation but instead will maintain a still face. Press and hold the+ &-
buttons simultaneously for 3 seconds to enter into still mode. To exit press
any button to resume animations.
*Note: 30 minutes of video will continue on a loop until turned off
manually, there is no timer on Fawny.
Connect with us:
- @pinterest.com/mindscape
- I] facebook.com/mindscapeproducts
- You(g youtube.com/mindscape
- @lnstagram.com/mindscapeproducts
READ BEFORE USE
IF UNIT DOES NOT WORK USING STANDARD ADAPTER PLEASE USE 2A (AMP) ADAPTER
.
PLEASE
EMAIL
[email protected]
WITH ANY QUESTIONS
Read User Manual Online (PDF format)
Loading......