MINDSCOPE ANIMAT3D Eek The Cat Instructions
- June 3, 2024
- MINDSCOPE
Table of Contents
MINDSCOPE ANIMAT3D Eek The Cat Instructions
IMPORTANT < EekThe Cat MAKES SILENT FACES, WHENTHERE IS NO AUDIO PLEASE NOTETHAT THE UNIT IS NOT BROKEN.
- Power adapter not included, all USB power adapters are compatible (ie: mobile phone charger).
- Please do not open Eek The Cat in order to avoid damaging the unit.
- Maintain adequate ventilation, do not cover the EekThe Cat with objects such as cloth or other materials.
- Please keep EekThe Cat away from direct rain, water or snow, covered porch outdoor setting is OK.
- Please disconnect/remove power source (USB cable) when not using for extended periods of time.
- Please do not disconnect the USB cable when EekThe Cat is ON. Switch OFF and then disconnect the USB cable.
- Do NOT drop or shake the unit.
- Please ensure that Eek The Cat is placed in temperatures within 20°F -100°F
Setup
-
Attach ears and tail
-
Attach USB cable
(INCLUDED) -
Use any USB power adapter
(NOT INCLUDED) -
Plug USB power adapter
(NOT INCLUDED) -
Switch power button
-
Adjust controls
Still Mode
Give EekThe Cat a decorative look by entering into still mode. Eek will not
run any animation but instead will maintain a still face.
Press and hold the + & – buttons simultaneously for 3 seconds to enter into
still mode. To exit press any button to resume animations.
Note: 30 minutes of video will continue on a loop until turned off
manually, there is no timer on Eek The Cat.
READ BEFORE USE
IF UNIT DOES NOT WORK USING STANDARD ADAPTER PLEASE USE 2A (AMP) ADAPTER
Contact Us
WITH ANY QUESTION
pinterest.com/mindscape
facebook.com/mindscopeproducts
youtube.com/mindscape
Instagram.comlmindscopeproducts