RAYCON RAPBAN300 Magic Power Bank Stand User Guide

RAYCON RAPBAN300 Magic Power Bank Stand

Specifications

• Product Name: Raycon Magic Power Bank
  Stand

• Model: XYZ123

• Capacity: 10000mAh

• Input: 5V/2A

• Output: 5V/2.4A

• Weight: 200g

• Dimensions: 120mm x 70mm x 15mm

Product Usage Instructions

1. Charging the Power Bank:
   • Connect the included USB cable to the input port of the power bank.
   • Plug the other end of the USB cable into a power source such as a wall adapter or computer.
   • The LED indicator will show the charging status.
2. Charging Devices:
   • Connect your device to the output port of the power bank using a compatible charging cable.
   • Press the power button on the power bank to start charging yourdevice.
3. Using the Stand Feature:
   • Extend the stand located at the back of the power bank.
   • Adjust the angle of the stand to suit your viewing needs.

Frequently Asked Questions (FAQ)
Q: How do I know when the power bank is fully charged?
A: The LED indicator will display a solid light when the power bank is fully charged.

QUICK START GUIDE

PRODUCT DETAIL PART

PRODUCT SPECIFICATIONS

• Battery Capacity: 10000mAh / 3.7V 37Wh iOS Port
• Input: 5V=2.5A / 9V=2A Type C
• Input & Output: 5V=2.5 / 9V=2A / 12V = 1.67A
• Wireless Charging
• Output Power: 5W / 7.5W / 10W / 15W
• Size: 14070.617.5mm
• Material: ABS+PC / Aluminum Alloy
• Model: RAPBAN300

*For Fast charging mode, 18W or above power adapter is required as its power source.

ATTENTION

• Do not squeeze or collide vigorously.
• Please do not disassemble or put into the fire or water in the powered state to avoid short circuit and leakage.
• Please do not use in severe high temperature, high humidity or corrosive environment to avoid damage to the circuit and leakage.
• Please do not place magnetic cards with magnetic stripes or chips (ID cards, bank cards, etc.) on the wireless charging board to avoid magnetic card failure.
• Please do not place metal (coins and other metal objects) on the wireless charging pad while charging, to avoid heat damage.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

IC CAUTION

Radio Standards Specification RSS-Gen, issue 5

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>