ID-COOLING HA-02 ARGB Hub Set User Guide
- June 14, 2024
- ID-COOLING
Table of Contents
ID-COOLING HA-02 ARGB Hub Set User Guide
Components List
-
HA-02 Hub
-
3M Stick Tape
-
PWM/Signal/LED Cable
Ports & Connection
Please make sure you’re connecting the cables when PC is powered off.
These 8 ports are designed for fans’ PWM headers.
Special Note:
If you connect non-PWM fans, they will run at full speed. Only F-1’s fan rpm
signal can be detected. Other ports won’t be detected.
L-1 L-8
These 8 ports are designed for 8 ARGB fans/LED strips.
P.S.L
P.S.L stands for PWM, Signal and LED. PWM and fan rpm signal will be transmitted by the small 4pin connected to Motherboard 4pin PWM fan header. LED signal will be transmitted by the 3pin ARGB header connected to Motherboard ARGB header.
MB RGB SYNC
ASUS: ADD_HEADER
MSI: JRAINBOW
GIGABYTE: D_LED
GIGABYTE: D_LED
Please don’t forget to download RGB Sync software that is compatible with your motherboard and just RGB color and mode in the software.
- Please ask for professional to help if you don’t how to install.
- Make sure you’re working on a power-off PC.
- If you have any doubt about componets list or product itself, please conta your original reseller/retailer.
- ID-COOLING is always ready to offer our support. You can see below contact information.
- Descriptions are for your reference. Different models may vary in terms of components list.
ID COOLING LIMITED
www.idcooling.com
support@idcooling.com
www.facebook.com/idcooling.global
www.twitter.com/idcooling
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>