ID-COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes Installation Guide

June 9, 2024
ID-COOLING

ID-COOLING LOGO

ID-COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes

Components List

  1. Heatsink x1
  2. Fan x1
  3. Universal Bracket x1
  4. Intel Backplate x1
  5. Standoff for LGA1700 x4
  6. Standoff for LGA 1200 and AMD x4
  7. Intel Screw x4
  8. AMD Screw x4
  9. Fan Clip x2
  10. Thermal Grease x1
  11. Tightening Nut x2ID-COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes-FIG-1

Bracket Illustration

ID-COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes-
FIG-2

Intel Backplate Illustration

The Intel backplate is designed for LGA1700 and LGA 1200/115X sockets. Push the screws to the outside for LGA1700. Push the screws to the inside for LGA1200/115X.ID-COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes-
FIG-3

Intel LGA1700/1200/115X

Note: Please choose the correct mounting position on the bracket end also choose the correct standoffs before the installation. 0 for LGA 1700 / 0 for LGA1200/115X. Put the backplate through the back of the motherboard; put on the correct standoffs end then secure the bracket with the Intel saew.ID-
COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes-FIG-4

Apply a thin layer of thennal grease to the CPU and then secure the heatsink with the tightening nuts. Finish the installation by connecting the fan cable to the “CPU_FAN• header.ID-COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes-
FIG-5

AMD AM5/AM4

Remove the original AMD plastic retention frame, but keep the backplate; put the standoff on and then secure the bracket with AMD screws.ID-COOLING
SE-214-XT ARGB Air Cooler 4 Heatpipes-FIG-6

Apply a thin layer of thennal grease to the CPU and then secure the heatsink with the tightening nuts. Finish the installation by connecting the fan cable to the “CPU_FAN• header.ID-COOLING SE-214-XT ARGB Air Cooler 4 Heatpipes-
FIG-7

Motherboard ARGB Sync ( for ARGB edition only)

ID-COOLING SE-214-XT ARGB
Air Cooler 4 Heatpipes-FIG-8

Secure the fan to the heatsink with fan clips. (For motherboard ARGB control): plug fan ARGB 3pin cable to 5V ARGB header on the motherboard. Then download correct software from Motherboard’s official website and use the software to control the ARGBlighting.

If You Have Questions.

  1. Please ask for professional help if you don’t know how to install.
  2. Make sure you’re working on a power-off PC.
  3. If you have any doubt about the components list or product itselt please contact your original reseller/retailer/etailer.
  4. ID-COOLING is always ready to offer our support. You can find the contact information below.
  5. The descriptions are for your reference. Different models may vary in terms of the components list

SHENZHEN BUYEASYCO., LTD.
www.idcooling.com
support@idcooling.com
idcooling_g oba
youtube.cam/c/idcooling

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals