ID-COOLING V17 Frostflow 240mm Liquid CPU Cooler Black Instruction Manual
- June 15, 2024
- ID-COOLING
Table of Contents
ID-COOLING V17 Frostflow 240mm Liquid CPU Cooler Black
Component List
- LGA1700/1200 Backplate x 1
- Intel Bracket x 1
- AMD Bracket x 1
- Tightening Nutx4
- LGA 1700 Standoff x 4
- LGA 1200/11 SX Standoff x 4
- AMD Standoffx4
- Plastic insulator x 4
- LGA20xx Standoff x 4
- Thermal Grease x 1
- Radiator Mounting Screw x 8
- Fan Mounting Screw x 8
Fan & Radiator Mounting
- Using the fan mounting screws to secure the fan(s) onto the radiator.
- Using the radiator mounting screws to secure the radiator to the case panel.
Intel Bracket Illustration
Intel Backplate Illustration
The Intel backplate is designed for LGA 1700 and LGA 1200/11 SX sockets. Push the screws to the outside for LGA 1700. Push the screws to the inside for LGA 1200/11 SX.
INTEL MOUNTING
Install the Intel brackets to the pump base using the small screws.
Intel LGA2066/2011
- Thread the LGA2066/2011 standoff into the motherboard CPU cooler mounting holes.
- Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
- Put the pump onto the CPU. Secure the block using the tightening nuts.
Intel LGA1700
- Push the screws on the backplate to the outside and then put the backplate from the back of the motherboard and insert the long screws through the motherboard.
- Put the LGA 1700 Standoff onto the long screws of the backplate.
- Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
- Put the pump onto the CPU. Secure the block using the tightening nuts.
Intel LGA1200/115X
- Push the screws on the backplate to the inside and then put the backplate from the back of the motherboard and insert the long screws through the motherboard.
- Put the LGA1200/115X Standoff onto the long screws of the backplate.
- Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
- Put the pump onto the CPU. Secure the block using the tightening nuts.
AMDAM4/AM5
Install the AM4 brackets to the pump base using the small screws.
AMD AM4/AM5
- Remove the original retention frame from the motherboard, but keep the backplate.
- Thread the AM4 standoffs onto the backplate. (Put the plastic insulator if you have it between the motherboard and the metal standoffs.)
- Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
- Put the pump onto the CPU. Secure the block using the tightening nuts.
If You Have Questions
- Please ask for professional help if you don’t know how to install it.
- Make sure you’re working on a power-off PC.
- If you have any doubt about the components list or the product itself, please contact your original reseller/retailer/etailer.
- ID-COOLING is always ready to offer our support. You can find the contact information below.
- Descriptions are for your reference. Different models may vary in terms of the components list.
Contact Information
SHENZHEN BUYEASYCO., LTD.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>