Panasonic DVD-S700EB-K DVD Player User Guide

FAQ

How do I do a factory reset (Shipping Condition) on my DVD recorder?

Please follow the steps below: Press the Functions menu button on the remote control, and when the menu appears, select Others and press OK. Then select Set Up and press OK. Select To Others and press the right hand arrow on the circle pad. Then select Initialize and press OK. Select Shipping Condition and press OK. The warning message will come up three times. Please press OK each time it does. When this has been done, you will need to turn theDVD Recorder off and disconnect it from the mains for a few minutes. After a few minutes have passed, reconnect the unit to the mains and it will reset itself.

Pixellation of the picture, popping on the sound, or complete drop out from time to time are all signs of a poor signal coming into the television/recorder. The first step is to search for new stations by going into the tuning menu and selecting 'Add New Channels', 'Add New Services', or 'Update Channel List' (the option that appears varies depending on the model). Please refer to your instruction manual for instructions on how to access the tuning menu on your product. Please note that not everyone is able to receive a good Freeview signal. You can check the predicted reception in your area by contacting Freeview

How do I set the date and time on my DVD Recorder?

Please follow the steps below: Press the Functions Menu button on the DVD remote control, select Others, and press OK Then scroll down to Others and press OK. Select To Others and press the right-hand arrow on the circle pad. Scroll down to Clock and press OK. Change Automatic to Off. Then press down to go to the time and press the up or down arrows to set the time. Press the right arrow after you finish each section. Repeat the same process for the date as well and press OK when you have finished.

How do I upscale a Blu-ray disc with a Panasonic Blu-ray player, when connected to a compatible 4K TV?

How do I upscale a Blu-ray disc with a Panasonic Blu-ray player, when connected to a compatible 4K TV?

How do I copy from HDD to DVD on my DVD recorder?

What are the recording modes?

The recording mode controls the size and quality of the recording. They are as follows:- XP - Maximum Quality - 1 hour per disc. SP - Good Quality - 2 hours per disc. LP - Reduced Quality - 4 hours per disc EP - Low Quality - up to 8 hours per disc. FR - Flexible Record - Fits a recording onto a DVD using variable sample rates where the recording is between 1 and 8 hours. A good example of this mode is when recording a film that is two and a half hours. Flexible record will adjust the sample rate to best fit the film onto one disk

How do I manually retune my DVD Recorder?

In some areas, aerials can pick up signals from more than one transmitter. This can trigger the 'New Service' message to appear. When this happens, the television/recorder may accidentally tune into, or try to tune into, the wrong transmitter, causing either the wrong regional channels to appear, or on rare occasions, causing the loss of some channels. The solution to this is twofold. First, turn off the 'New Service Message' or 'New Channel Message' (please see your instruction manual for information on where to find this option in the menu). This will prevent the signals from the incorrect transmitter from prompting you to do a complete retune on your unit. Second, if your unit is a 2007 model or later*, you will be able to manually tune the product. Before

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>