wilfa TM1-1500S CHA Tea Maker Instruction Manual
- June 6, 2024
- Wilfa
Table of Contents
CHA
TEA MAKER TM1-150 0S, TM-150 0S
Instruction manual
READ ALL INSTRUCTIONS BEFORE USE
IMPORTANT SAFETY INSTRUCTIONS
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- If the kettle is overfilled, boiling water may be ejected.
- The electric water kettle must only be plugged into 220-240 volt outlet.
- The kettle becomes warm during use and should be held by handle only.
- The kettle must not be placed near open flame or other heat sources such as stovetop, fireplace, etc.
- Fill water only up to the “MAX” level as indicated on the kettle.
- Place the water kettle on a dry and smooth surface to prevent sliding.
- Remember! Do not turn the kettle on until water has been added.
- Never add any other liquids than water.
- Remember! The lid must always be on during heating.
- Do not pull the cord when attempting to unplug the kettle. Hold the plug.
- Never leave the cord hanging from a table or other storage area.
- Always unplug the kettle after use and during cleaning.
- Never immerse the kettle or the base in water or other liquid during cleaning.
- Do not use the kettle outdoors.
- If the kettle is used for another purpose than that recommended or is used in a way that conflicts with the user guide, the user carries the full responsibility for possible damage that can occur.
- Is there damage to the device or that it does not work, it must be serviced only by authorized personnel.
- This appliance is intended to be used in household only.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach for children aged less than 8 years.
- The appliance is only to be used with the stand provided.
- Avoid spillage on the connector.
- The heating element surface is subject to residual heat after use.
PRODUCT OVERVIEW
- Spout
- Lid
- Handle
- Glass body
- Base
- Temperature button 70 °C
- Temperature button 80 °C
- Temperature button 90 °C
- Temperature button 100 °C
- Keep warm button
- Heating/stop button
OPERATION
-
Connect the kettle to the wall outlet.
-
Select one of the suitable lids that are included. There is a lid for boiling water (Fig. 1) and a lid for tea (Fig. 2).
-
Attach the corresponded lid to the kettle and select desired temperature on the base panel.
-
Six indicator lamps are set on the base, to indicate the selected temperature (70 °C, 80 °C, 90 °C, and 100 °C) and the keep warm and power turning-on indication function.
-
Wait for the appliance to heat, a beeping noise will indicate when the set temperature has been reached.
-
Lift the kettle from the base and serve.
-
The tea lid has a tea bag holder/ tea container. This is accessed by twist the upper part of the tea holder towards open. See (Fig. 3)
-
This product is equipped with the dry-burning automatic power-off device, to automatically cut off the power in case of dry overheating, thus preventing the product damage.
-
In use process, if the kettle is dry burn accidentally, first unplug the power plug and add the appropriate cold water to reduce the electric hot tray temperature, so the power off device will automatically reset. Drain the first cooked water and then normally use the kettle.
-
For burning the water, pull the knob located at the center of the lid to open the lid (shown in Fig. 4). If using the tea lid, simply pull the knob located at the center of the lid top remove the tea holder and the lid. (shown in Fig. 5). Place the tea into the tea bag and then add the appropriate water to the level between MIN and MAX shown by the kettle water gauge.
-
After adding water, place the lid properly; lift up the tea bag (Fig. 6) after covering the lid and then place the kettle on the base; insert the power plug into the corresponding power socket and then the buzzer will beep twice and all indicators is on for one second, so the kettle is at the standby state if no any other operation.
-
The corresponding indicator will be on if the heating temperature is set, so the heating will start when the on/off switch is pressed. The indicator will flash, the buzzer will beep twice and the temperature indicator will be on if up to the setting temperature, so the kettle is at the standby state if no any other operation for one minute.
-
Press the keep warm button to start and press it again to cancel. Only the 70 °C, 80 °C, and 90 °C can be selected for insulation rather than 100 °C. If the keep warm function has been selected, this function will be canceled if the temperature is set to 100 °C. If the keep warm function is selected the on/off switch must be pressed within one minute, otherwise the appliance will return to standby mode. If the keep warm function is selected and the on/off switch is pressed within one minute the keep warm function becomes active for 30 minutes.
-
When the appliance reaches the set temperature the indicator flashes, to inform that water temperature has been up to or above this setting value;
-
If the keep warm function hasn’t been selected and the kettle is removed from the base the appliance will return into standby mode. If the keep warm function has been selected and the kettle is removed from the base the appliance will return to its current temperature state when the kettle is returned to base. If the kettle isn’t detected by the the base within one minute, the beep sound will be given and the appliance will return to standby mode.
In standby mode, all LEDs are off and the heating process stops. In standby mode, if there is no kettle on the base, all buttons and indicators disable.
CLEANING AND MAINTENANCE
Unplug the kettle. Do not immerse the base and kettle in water or any other liquids. If the pot is dirty, use a mild cleaning agent. Do not use any sharp objects. Before cleaning, remove the power plug and allow the kettle cool. Wipe the kettle outside and bottom cover with a damp cloth and then dry it with dry cloth. Do not use rough cleaning materials, otherwise, it will scratch the kettle body.
Descaling
Descale the kettle regularly to ensure a longer product life.
- At least descale twice each year in normal use.
- Add the vinegar to the MAX level shown in water gauge and boil.
- Cut off the power (remove the power plug).
- Add the cooked vinegar into the kettle for one night and then drain.
- Add the water to the MAX level shown in water gauge to boil and then drain; after that, rinse the remaining dirt and vinegar off.
- Wash the kettle with cleaning water for descaling.
GUARANTEE
Wilfa issues a 5-year guarantee on this product from the day of purchase. The guarantee covers production failure or defects that arise during the guarantee period. Your purchase receipt works as proof towards retailer if claiming your guarantee.
The guarantee is valid only for products that are bought and used in private households. The guarantee is not valid if the product is used commercially. The guarantee is not valid if the product is misused, used by negligence, if not following instructions given by Wilfa, if modified or if unauthorized reparation is done. The guarantee is also not valid for normal wear of the product, misuse, lack of maintenance, use of wrong electrical voltage or:
- Overloading of product
- Not descaled according to instruction manual
Instruction manual is also available at our website; wilfa.com
SUPPORT AND SPARE PARTS
For support please visit us at wilfa.com, and see our customer service/support
page. Here you will find frequently asked questions, spare parts, tips and
tricks, and all our contact information.
RECYCLABILITY
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling free of charge.
**BEYOND EXPECTATIONS
TM-1500S_TM1-1500S_20_01**
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>