oraimo OHF-811A Tower Fan User Manual

oraimo OHF-811A Tower Fan

Product Information

Product Usage Instructions

1. Make sure that the fan base is properly installed before plugging it into an electrical outlet. Follow the steps below to set up the fan base:

2. Unscrew the lock nut anticlockwise and set it aside.

3. Prepare the fan base by staggering the front and rear bases slightly, aligning the pegs with slots, and snapping them into place.

4. Pass the power cord across the fan base and lock nut.

5. Attach the assembled base to the body.

6. Tighten the lock nut clockwise.

7. Snap the power cord into the slot.

8. Place the fan on a firm, level surface free from obstructions to maximize airflow.

9. Using the control panel or remote control, you can control various settings of the tower fan:

   • Fan mode: Select from Normal, Natural, Sleep, or Auto mode.
   • Fan speed: Adjust the fan speed using the “+” and “-” buttons.
   • Oscillation: Turn on or off the oscillation feature.
   • Power ON/OFF: Tap once to turn the fan on or off.
   • Auto ON/OFF Timer: Set a timer for the fan to turn on or off automatically.

10. The tower fan has different modes:

    • Normal Mode: The fan operates at a constant speed.
    • Natural Mode: The fan speed changes as the ambient temperature varies.
    • Sleep Mode: The fan operates at a low speed to provide a comfortable sleeping environment.
    • Auto Mode: The fan adjusts its speed and mode automatically based on the ambient temperature.

11. Additional features of the tower fan include:

    • 48-Hour Auto OFF: After 48 hours of continuous use without any other operation, the fan will turn off automatically.
    • Memory Function: If the power is not disconnected, the fan will remember your last settings (except timer) when turned back on.
12. 1. Pinch the locking tab in and then hold to pull the battery compartment out.

13. Replace the battery with the same type, making sure the (+) side is facing up.

14. Push in the compartment until securely locked into place.When using the remote control, follow these steps to install or replace the batteries:
    WARNING: Keep batteries away from children to avoid chemical burn hazards.

15. For user servicing, do not remove any parts that should not be removed. Discard the product if the attachment plug is damaged.
    Follow these steps if you need to replace the fuse:

16. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.

17. Open the fuse cover by sliding it towards the blades.

18. Remove the fuse carefully.

19. Replace the fuse only with a 5.0 Amp, 125 Volt fuse (provided with the product).

20. Close the fuse cover by sliding it closed.

IMPORTANT SAFETY INSTRUCTIONS

DANGER
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

• DO NOT operate the fan without the fan base installed in place.
• DO NOT partially or fully cover or block airflow while in operation.
• DO NOT insert fingers or objects through the grille or fan blades while in operation.

When using an electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following:

INTENDED USE

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by person responsible for their safety.
• Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children.
• Use the appliance only for intended household purposes as described in this User Manual. Any other use is not recommended that may cause fire, electric shock, or injury to persons.

ELECTRICITY SAFETY

• This appliance must be provided with correct voltage via a professionally installed power socket.
  Make sure the voltage indicated on the label of the appliance is the same as your local supply.

• DO NOT operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.

• WARNING – To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

• IMPORTANT – This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to rig this safety feature.

• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

RELATED TO USE

• DO NOT touch or hold the mains plug with wet hands.
• DO NOT use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present.
• DO NOT attempt to disassemble, repair, modify or replace any part of the appliance. No user serviceable parts inside. All servicing should be performed by qualified personnel only.
• DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic areas and where it will not be tripped over. To avoid fire hazard, NEVER route cord under furniture or appliances.
• Always make sure to place the fan on a flat, level surface before operation.
• Always turn the fan OFF and unplug it before cleaning, making any repairs or servicing, or whenever not in use.
• In the event of a malfunction (sparks, burning smell, etc.), immediately stop operating, disconnect the power cord and contact our Customer Support.

FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS

SPECIFICATIONS

KNOWING YOUR TOWER FAN

In the Box

Check if all accessories are included. Contact us if there is any missing part.

Setting Up

Make sure that fan base is properly installed before plugging into an electrical outlet.

1. Unscrew Lock Nut
   Unscrew the lock nut anticlockwise andset aside.

2. Prepare Fan Base
   Stagger the front and real bases slightly,align pegs with slots and snap into place.

3. Install Fan Base

4. Pass the power cord across the fan base and lock nut.

5. Attach the assembled base to the body.

6. Tighten the lock nut clockwise.

7. Snap the power cord into the slot.

USING YOUR TOWER FAN

Control Panel

LED Display

Fan Modes

Additional Features

48-Hour Auto OFF
After 48 hours of continuous use without any other operation, the fan will turn off automatically.

Memory Function
If power is not disconnected, it will always remember your last settings (except timer) when turned back on.

Using with Remote Control

• Remove the plastic tab underneath battery before use.
• For added convenience, the same control buttons can be found on the remote control.

Installing & Replacing Batteries

• Replace with new battery of the same type (CR2025, 3V) when necessary.
• When not using the remote control for extended period of time, take out the battery.

1. Pinch the locking tab in and then hold to pull the battery compartment out.
2. Replace the battery with the same type, making sure the (+) side facing up.
3. Push in the compartment until securely locked into place.

WARNING:
Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery  compartment. If the battery compartment does not close securely, stop using theproduct, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
The cells shall be disposed of properly, including keeping them away from children. Even used cells may cause injury.

User Servicing Instruction

• To prevent electric shock, disconnect the fan before replacing the fuse.
• Risk of fire. DO NOT replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse only with 5.0 Amp, 125 Volt fuse (provided with product).
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

Use a multimeter to test if the fuse is blown.

CLEANING AND MAINTENANCE

• Always make sure the fan is turned off and unplugged before cleaning.
• DO NOT clean with abrasive chemicals, cleaning agents or solvents.
• Never immerse in water or allow water to drip into the motor housing.

Daily Cleaning

• Wipe the surface with a soft, damp cloth to remove any dirt or dust.
• Periodically vacuum clean the dust between the grilles to prevent dust buildup.
• Completely dry before reconnecting to a electrical outlet.

Grilles & Fan Wheel

1. Unscrew the screw at the top and remove the rear grille.
2. Unscrew the screw at the bottom and lift to take out the fan wheel.
3. Unscrew the screw at the bottom and remove the front grille.
4. Rinse clean the grilles and fan wheel. Allow to dry completely.
5. Install and secure the front grille, fan wheel and rear grille back in place.

When not in use for an extended period of time, clean as instructed. Cover and store in a cool, dry location with the cord arranged away from traffic areas to avoid trip-over or damage.

TROUBLESHOOTING

The troubleshooting guide addresses the most common problems. If problems persist, feel free to contact the Customer Support via email: [email protected]

powered electrical outlet and the voltage indicated is the same as your local supply.
Fan stops suddenly.| • Check if you have enabled Auto OFF timer. Tap the power button to turn it on again.

**** • The fan will turn off automatically after 48 hours of continuous use.

Excessive noise.| **** • Check if the fan base is properly and firmly assembled.

**** • Check if the air inlet and outlet grills are clogged with dust or other buildup. We recommend that the fan be cleaned regularly.

Remote control does not work.| **** • Make sure the fan is connected to a powered electrical outlet.

**** • Check if the battery in remote control is enough in power.

**** • Remove the obstacles between the fan and the remote. Effective distance:

5 meters.

WARRANTY AND SERVICE

Thank you for choosing Oraimo Tower Fan.
This product is covered with Oraimo product and labor warranty for 12 months from the date of its original purchase.
The warranty will not apply in cases of:

• Misuse, dismantling, or repairs performed by unauthorized personnel.
• Any appliance that has been tampered with or used for commercial purpose.
• Use of force, natural hazards, damage caused by external influences.
• Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
• Partially or completely dismantled appliances.
• Defects caused by or resulting from damages from shipping or alteration to the product or any of its parts that have been performed by unauthorized personnel.

We can only provide after-sales service for products that are sold by Oraimo or Oraimo authorized retailers and distributors. If you have purchased your appliance from a different place, please contact your seller for return and warranty issues.
Please have your order ID ready before contacting Customer Support.

Warranty Certificate

• Customer’s Name
• Order ID：
• Product Model：
• Problem Description：

This product is covered by a guarantee from the date of purchase. The warranty is valid only when the warranty card is properly completed.Warranty is limited to the core product. Accessories included in the package are not covered. Please contact us if you have a question or experience a problem with the product, we promise we will give you a satisfied solution within 24 hours

Scan to Visit Our Website

[email protected]
us.oraimo.com

FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

References

• Official Website – Oraimo

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>