Brifit WS08 Wireless Thermometer Hygrometer User Guide
- June 14, 2024
- Brifit
Table of Contents
Brifit WS08 Wireless Thermometer Hygrometer
Free apps are available for both Android and iOS.Before using the product, here are the 3 important points to keep the sensor accurate.
- The app will request the photo and file permission because you can use photos to help remember the location.
- The app itself does not record any location history. Android user has to turn on location permission because Google makes the BLE and GPS in the same Commands.
- SensorBlue is a simple app that doesn’t need wifi or GPS.
- The sensor is an accurate humidity and temperature MEMS sensor. Please don’t put it in the water.
- The sensor detects the air temperature and humidity through the hole in the front, please don’t cover it.
Please follow the following steps to use the product.
- Please scan the QR code on the box or on the manual to download the APP.
- Turn on the APP and make sure the Bluetooth of the
- The APP is turned on.
- Take off the battery sleeve, and then the sensor starts to work.
- Tap the “Add device” or “+” to add the hygrometer
- The APP is going to pair the device. After you press the button on the product, it will connect automatically.
- After pairing your smart hygrometer with the SensorBlue APP, you can use the APP to check the temperature and humidity.
- Tap the camera icon to take photos of the place where you put the sensor. You can set up the desired alert temperature or humidity.
- When you connect the hygrometer with the APP, you can read the instant temperature data and humidity data.
- Some of the models which with a buzzer alert on the device, if the temperature or humidity is out of range, it will have the alert on the device.
- If you need to check the graphic or history, tape the temperature number or humidity number directly. Then you will see them.
- If you need to set up the alert, tape the photo area. And set up the range. Alert will happen on the device if the temp is below or above the target.
- Alert will happen on the device if the humidity is below or above the target.
Q: The temperature and humidity data are stuck, what is the problem?
A: This might be a low battery or the sensor broken. If you change a battery
and still find this issue, please contact the seller.
Q: Can I output the history data?
A: Yes, you can output the history data in CSV format. You can use Excel or
Google Sheets to open it.
Q: How many devices can I add to the app?
A: 100
Q: Why I cannot receive the data in the living room when I put them in the
garage?
A: The sensor uses 2.4G frequency to transmit the data. This frequency is hard
to get through the hard wall. Same as the Bluetooth earbuds.
Q: Why I can’t pair it in the Bluetooth setting?
A: The sensor uses BLE technology. You have to pair it from the APP.
Q: How many days will the history stored in the device?
A: 100 days
Q: Can multiple users use the sensor at the same time?
A: Yes, no matter if you are an iPhone user or an Android user. You can
connect them at the same time and get the data.
Q: I changed a new phone; how can I get the history back?
A: The history data is in the sensor for 100 days until you clear it or you
change the battery. You can download it again.
Technical Spec
Model No.:WS08 Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>