Moes WHT-006 Series Thermostat WIFI Type Instruction Manual
- June 14, 2024
- MOES
Table of Contents
- WHT-006 Series Thermostat WIFI Type
- ABOUT YOUR THERMOSTATS
- TECHNICAL DATA
- FEATURES
- BEFORE WIRING AND INSTALLING
- WIRING
- INSTALLATION
- HOME SCREEN QUICK REFERENCE
- OPERATION
- ABOUT WIFI WI-FI CONNECTION
- Network distribution mode:
- APP operation interface description (heating thermostat)
- SIMPLE EXCEPTION HANDLING
- SERVICE
- RECYCLING INFORMATION
- WARRANTY CARD
- Documents / Resources
006 Series Thermostat
WIFI Type
WHT-006 Series Thermostat WIFI Type
For
Water Heating/Boiler/Electric Heating
https://drive.google.com/drive/folders/1JH9x_NA3BNWVGa98tEsB2YVv5puF7wMM?usp=sharing
Thank you for purchasing our products, please read the following terms before
installation and use:
Please confirm that this product is suitable for your heating equipment before
installation;
- Before installation or maintenance, please make sure to keep the power off;
- Please strictly follow the wiring diagram for wiring installation;
- Installation to the wall, please confirm that the fasteners are suitable for this product;
- Do not pull the cable too hard, otherwise the product will be damaged;
- If a hard plastic wire is used in the installation process, it must be bent to an appropriate angle in advance;
- Please arrange for professionals to install;
- Please contact the after-sales service for equipment failure, please do not try to repair it yourself;
- After installation, please refer to this manual to check again to ensure normal and safe use, and keep this manual properly.
ABOUT YOUR THERMOSTATS
The 006 range has been developed to control electric underfloor, water heating or water/ gas boiler systems. These units are designed for use in commercial, industrial, civil and domestic properties
In the box you will find
Thermostat 1pc User Guide 1pc QC Passed 1pc
Screws 2pc Wall plate 1pc (Floor sensor is Optional)
TECHNICAL DATA
Power Supply: 95~240 VAC, 50~60 Hz
Current Load: 5A (water heating, gas boiler), 16A (electric heating)
Sensor: NTC3950, 10K
Accuracy: ±1°C
Set Temp. Range: 5-35°C
Room Temp. Range: 5-99°C
Display Temp. Range: 5~99°C
Ambient Temp.: 0~45°C
Ambient Humidity: 5~95% RH (Non Condensing)
Storage Temp.: -10~45°C
Power Consumption: <1.5W
Timing Error: <1%
Shell Material: PC+ABS (Fireproof)
Installation Box: 86*86mm Square or European 60mm Round Box
Wire Terminals: Wire 2×1.5mm² or 1×2.5mm²
Protection Class: IP20
FEATURES
On Appearance
- LED display, more friendly interface;
- Touch operation buttons, smoother interaction;
- The ultra-thin embedded panel perfectly fits all kinds of walls;
- The borderless small rounded corner design is simple and atmospheric;
- Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;
On Functionality
- Rich function options, Modbus, WIFI, keycard, etc., to meet all your needs;
- Strict temperature control accuracy (±1℃) to provide the warmth you want;
- Power off protection, save all your settings safely;
- Provide weather information and humidity display
- Preset adjustment of 5+1+1 mode in a week, programmable setting of 6 time periods a day, green energy saving, Less costmore intelligent and environmental protection;
- Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/multi-terminal control;
- Perfect access: Tmall Genie, Amazon echo, Google Home, full experience new voice control method;
DIMENSION:(mm)
BEFORE WIRING AND INSTALLING
- Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.
- Check the rathings given in the instructions and on the product to make sure the product is suitable for your application.
- Installer must be a trained, experienced service technician.
- After installation is complete, check out product operation as provided in these instructions.
ABOUT YOUR THERMOSTATS
The 006 range has been developed to control electric underfloor, water
heating or water/ gas boiler systems. These units are designed for use in
commercial, industrial, civil and domestic properties
CAUTION
Electrical Shock or Equipment Damage Hazard. Can shock individuals orshort
equipment circuitry. Disconnect power supply before installation.
WIRING
Note:
GA is for water heating; GB is for electric heating; GC is for water/gas
boiler;If your boiler has more than three wires, please feel free to contact
us and we will answer the correct installation method for you.NTC and Modbus
is optional.
INSTALLATION
Your thermostat is suitable for istallation within a standard 86mm pattress
box or European 60mm pattress box.
Step 1. Keep power off. See Fig 1.
Step 2. Remove the mounting plate by pushing the LED assembly. See Fig 2.
Buttons: Capacitive Touch Buttons
Step 3. Connect power supply, load into the
appropriate terminals. (see “Wiring your thermostat” for details and Fig 3).
Step 4. Fix the mounting plate into the wall with screws in the box. See Fig
4.
Step 5. Fix the thermostat body and the mounting plate by the
lower button. See Fig 5.
Step 6. Installation complete. See Fig 6.
HOME SCREEN QUICK REFERENCE
Note:
The weather and humidity will be synchronized within 1 hour after the device
is connected to the Internet for the first time,and the weather will be
synchronized every hour thereafter.
Press the in the power-on state to display the humidity and set
temperature.
OPERATION
During Power On
-
Power On/off: Press to turn the thermostat on/off.
-
Function & Programmable
Touch to change between manual mode and programmemode.
In manual mode, will show on the display, In programmable mode, will show on the display. -
Setting Temperature
In the programming mode, the temperature setting and time setting will be locked. If the user wants to adjust, he must first adjust the thermostat to manual mode by pressing the key. In the mode of manual, press to set the desired temperature. -
Adjusting/Setting the
Clock Press to set minute, hour and weekday By using the .
Press once more to confirm and exit. -
Locking your Thermostat
Press and hold the for 5 seconds to lock/unlock your thermostat.
In item 3 of high senior options, you can select full lock or half lock. -
Adjusting/setting the Program Schedules
When Wi-Fi connection is made, your thermostat will automatically accept the program schedule made via the APP on your device.
If the schedule is set through the APP, after the APP completes the schedule setting, the thermostat needs to be turned off once.
If the thermostat does not establish a Wi-Fi connection, manually set the schedule see below for detailed instructions:
To set the program schedules throughyour thermostat (NOT via your smartphone/tablet) simply follow theinstructions as below:
Please note: Setting the programme schedule through your thermostatcan only be carried out if there is no WiFi connection between yourthermostat and smartphone/tablet.
Press icon four times in a row. You can see “MON TUE WED YHU FRI” and , and the minutes of time are flashing.
Use to set the minutes;
Press the icon again, the hour of the time will flash, set the hour by ;
Press the icon again, the temperature setting will flash, set the temperature by ;
This completes the setting of periods1.
In the same way, complete the settings of periods2, 3, 4 and 5 (display periods1,2), 5 (display periods3, 4).
Press the icon once more to enter the Saturday schedule settings (you will see the SAT in the upper left corner of the screen).
Repeat the above process to set the period and temp. and Sunday schedule.
Press the icon once more to confirm and exit.
Default settings for program schedule
Time display| WEEKDAY (MONDAY—FRIDAY) (1 2 3 4 5 shows on screen)|
WEEKEND (SATURDAY) (6 shows on screen)| WEEKEND (SUNDAY) (7 shows on
screen)
---|---|---|---
TIME| TEMPERATURE| TIME| TEMPERATURE| TIME|
TEMPERATURE
Period 1| 6:00| 20°C| 6:00| 20°C| 6:00| 20°C
Period 2| 8:00| 15°C| 8:00| 20°C| 8:00| 20°C
Period 3| 11:30| 15°C| 11:30| 20°C| 11:30| 20°C
Period 4| 13:30| 15°C| 13:30| 20°C| 13:30| 20°C
Period 5(1+2)| 17:00| 22°C| 17:00| 20°C| 17:00| 20°C
Period 6(3+4)| 22:00| 15°C| 22:00| 15°C| 22:00| 15°C
A separate schedule may be set for weekdays (Mon–Fri) and for weekends (Sat or
Sun).
7. Checking the Temperature of Floor Sensor
Press and hold the arrow for 5 seconds to display the temp. of floor sensor.
If there is no external external sensor, “err” will be displayed.
8. Setting the Functions and Options
During Power Off, press and hold and for 8 sec. In the order to reach system
function. Then press to scroll through the available functions, and use the
arrows to change the available options. All settings are confirmed
automatically.
| Code | Function | Setting and options | Default |
|---|---|---|---|
| 1 | Temperature compensation | -9 to 9°C (for internal sensor) | -3 |
| 2 | Deadzone Temperature. | 1-5°C | 1 |
| 3 | Button Locking | 00:All buttons are locked except power button. 01:All | |
| buttons are locked. | 1 | ||
| 4 | Sensor typer | in:internal Sensor(to control the temp.) |
Ou:External Sensor(to control the temp.) AL:Internal/External Sensor (Internal
sensor to control the temp., external sensor to limit the temp.)| AL
5| Min.Set Temp.| 5-15°C| 5
6| Max.Set Temp.| 15-45°C| 35
7| Display Mode| 00 : Display both set temp. and room temp. 01 : Display set
temp. only| 0
8| Low temperature protection setting.| 0-10°C| 0
| High temperature protection setting.| 25-70°C| 45
A| Economy Mode| 00: Non-energy saving Mode
01: Energy saving mode| 0
B| Economy Temp.| 0-30°C| 20
C| Daytime display brightness(6:00-22:00)| 0-8| When set to 0, the device will
run for 10 seconds after inactivity.
The screen will go completely off with no display.| 1
D| Brightness at night
(22:00-6:00)| ,
0-0| 1
E| Reset| 00: No factory reset; 01: Factory reset| 0
F| Version number| | U2
ABOUT WIFI WI-FI CONNECTION
Before using your Wi-Fi thermostat for the first time, you must configure the
Wi-Fi signal and settings through your smartphone or tablet. This will allow
communication between your connecteddevices.
Step 1 Download MOES App on App store or scan the QR code
MOES App is upgraded as much more compatibility than Tuya Smart/Smart Life
App, functional well for scene controlled by Siri, widget and scene
recommendations as the fully new customized service.
(Note: Tuya Smart/Smart Life App still works, but MOES App is highly
recommended)
Registration or Log in.
Step 2 Connect the thermostat
Method 1: Scan the QR code to configure the network guide Download “MOES”
Application.
Enter the Register/Login interface; tap “Register” to create an account by
entering your phone number to get verification code and “Set password”. Choose
“Log in” if you already have a MOES account.
https://smartapp.tuya.com/s/p?p=N8bUqOZ8HBQjU0K0&v=1.0
Method 2: Ordinary distribution network guidance
Network distribution mode:
-
EZ Mode (BLINK Quickly)
When the thermostat is off, press and hold the “ ” until the thermostat screen flashes quickly and displays the “ ” icon, and then operate according to the following figure.
-
AP Mode (BLINK Slowly)
When the thermostat is off, press and hold the “ ” until the thermostat screen flashes slowly and the “ ” icon is displayed.
(if the “ ” icon appears, continue to press the “ ” until the thermostat screen Flashes slowly and displays the “ ” icon), and then operate according to the following figure.
APP operation interface description (heating thermostat)
SIMPLE EXCEPTION HANDLING
| No. | Phenomenons | Handling |
|---|---|---|
| 1 | Power is on but without display. | *Check if the terminals between LCD panel |
and Power Unit Box is loosen.
2| Without output but display works.| Usea new LC panel or new Power Unit
Box to replace the old one.
3| Room Temp. Is a lttle different from the actual.| Do temperature
calibration in item 1 of high senior options
SERVICE
Thank you for your trust and support to our products, we will provide you with
a two-year worry-free after-sales service (freight is not included), please do
not alter this warranty service card, to safeguard your legitimate rights and
interests. If you need service or have any questions, please consult the
distributor or contact us.
Product quality problems occur within 24 months from the date of receipt,
please prepare the product and the packaging, applying for after-sales
maintenance in the site or store where you purchase; If the product is damaged
due to personal reasons, a certain amount of maintenance fee shall be charged
for repair.
We have the right to refuse to provide warranty service if:
- Products with damaged appearance, missing LOGO or beyond the service term
- Products that are disassembled, injured, privately repaired, modified or have missing parts
- The circuit is burned or the data cable or power interface is damaged
- Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.)
RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste
electrical and electronic equipment (WEEE Directive2012/19 / EU) must be
disposed of separately from unsorted municipal waste. To protect your health
and the environment, this equipment must be disposed of at designated
collection points for electrical and electronic equipment designated by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences for the environment and human health.
To find out where these collection points are and how they work, contact the
installer or your local authority. ****
Thank you for your support and purchase at we Moes, we are always here for
your complete satisfaction, just feel free to share your great shopping
experience with us.
If you have any other need, please do not hesitate to contact us first, we will try to meet your demand.
@moessmart
@moes_smart
@moes_smart
@moes_smart
MOES.Official
www.moes.net
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: [email protected]
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
** M anufacturer:
WENZHOU NOVA NEW ENERGY CO.,LTD**
Address: Power Science and Technology
Innovation Center, NO.238, Wei 11 Road, Yueqing
Economic Development Zone, Yueqing, Zhejiang,
China
Tel: +86-577-57186815
After-sale Service: [email protected]
WARRANTY CARD
Product Information………………………….
Product Name………………………….
Product Type……………………………..
Purchase Date……………………………..
Warranty Period…………………………..
Dealer Information……………………..
Customer’s Name…………………………
Customer Phone…………………..
Customer Address…………………………
Maintenance Records
| Failure date | Cause Of Issue | Fault Content | Principal |
|---|---|---|---|
Documents / Resources
| Moes
WHT-006 Series Thermostat WIFI
Type
[pdf] Instruction Manual
WHT-006 Series Thermostat WIFI Type, WHT-006, Series Thermostat WIFI Type,
Thermostat WIFI Type, WIFI Type, Type
---|---