DOUK AUDIO STB-01 LP Vinyl Turntables Metal Disc Stabilizer Record Weight HiFi Instruction Manual
- June 14, 2024
- Douk Audio
Table of Contents
DOUK AUDIO STB-01 LP Vinyl Turntables Metal Disc Stabilizer Record Weight
HiFi
Product Information
The Turntable Disc Stabilizer Record Weight/Clamp is designed to improve the performance of your turntable. It helps to reduce resonance vibration, stabilize rotational speed, and lower the noise floor. This results in a pure signal retrieval, realistic sound reproduction, improved stereo image and focusing, and stabilized sound image. Additionally, it provides an improved signal when burning quality CDs from LPs.
The product is manufactured by Nobsound/Douk Audio and has the model number STB-01. It is made of high-quality zinc alloy with a gold-plated surface treatment. The diameter of the disc stabilizer is 80mm (3.14in), and its height is 30mm (1.18in). The shaft hole diameter is 7mm, and the net weight of the product is 230g.
Product Usage Instructions
- Ensure that your turntable is turned off and unplugged before using the disc stabilizer.
- Place your vinyl record on the turntable and secure it with the turntable spindle as usual.
- Hold the disc stabilizer by its sides and gently place it on top of the record, making sure that the shaft hole aligns with the turntable spindle.
- Apply slight downward pressure on the disc stabilizer to ensure it makes proper contact with the record.
- Turn on your turntable and let it reach the desired rotational speed.
- The disc stabilizer will help to stabilize the rotational speed, reduce vibrations, and improve sound quality during playback.
- After use, turn off your turntable and carefully remove the disc stabilizer from the record.
- Store the disc stabilizer in a safe place to protect it from damage.
For any further assistance or inquiries, please refer to the contact information below:
Introduction
- For Resonance Vibration, Stabilizing Rotational Speed
- Lowers Noise Floor Significant
- Provides Pure Signal Retrieval
- Gives Realistic Sound Reproduction
- Improves Stereo Image and Focussing, Stabilizes Sound Image
- Gives Improved Signal when Burning Quality CDs fromLPs
Parameters
- Brand: Nobsound / Douk Audio
- Model: STB-01
- Material: Zinc alloy
- Surface treatment: gold-plated
- Diameter: 80mm / 3.14in
- H eight : 30mm / 1.18in
- Shaft hole diameter: 7mm
- Net Weight: 230g
Packing List
- 1 × Record Stabilizer
- 1 × Packing Box
Contact information
- Address: Room 1329, Wang Cheng Building, Long Guan street, LongHua new District, Shenzhen, Guang Dong, China
- Contact: LIU CHENXI
- Tel: +86-177-0402-8602
- Email: nobsound@doukaudio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>