DOUK AUDIO M1 Plus Mini Bluetooth 5.0 Digital Amplifier Receiver User Manual

June 1, 2024
Douk Audio

DOUK AUDIO M1 Plus Mini Bluetooth 5.0 Digital Amplifier Receiver

Product Information

Specifications

  • Maximum Output: 100W*2 (4Ω)
  • THD: 0.08%
  • Speaker Impedance: 3-8Ω
  • SNR : 98dB
  • Input Sensitivity : 0.775V
  • Working Voltage: DC 18-30V
  • Machine Size: L133W128H36mm, Weight: 0.51kg
  • Power Supply Size: L300W220H70mm

Product Usage Instructions

Surface Instructions

  • Functional Indicator Light:

    • 1 Blue
    • 2 Red/Blue
    • 3 Red/Blue
    • 4 Digital Signal Indication
  • RCA Input:

    • Red U Disk Input
    • Red Optical (Bright A Signal)
  • USB Interface :

    • (Automatically switch and play when inserting USB flash drive)
  • Remote Receiving Window

  • Bass Knob

  • Mid Knob

  • Treble Knob

  • Encoder Knob:
    (Short press to start/short press to cut channel again/rotate to adjust volume/long press to shut down)

  • Bluetooth Antenna Base

  • Analog RCA Input:
    (Red to right channel, white to left channel)

  • Coaxial Input

  • Optical Input

  • Speaker Output:
    (Red connection +/ black connection -, R for right channel / L for left channel)

  • Power Interface:
    (DC voltage shall not be higher than 30V)

Remote Control

  • Standby
  • Enter the Channel Selection Key
  • Mute
  • Play/Pause
  • PREV
  • NEXT
  • VOL-
  • VOL+
  • Number Keys

Warning

  1. Do not open the shell without permission. Improper operation may cause electric shock.
  2. Please use the regular manufacturer’s switching power supply, otherwise the risk of damage to the machine.
  3. Do not place the machine in a high temperature and humidity environment.

Thank you very much for choosing our products!Please read this manual carefully before using the product.

Surface Instructions

DOUK-AUDIO-M1-Plus-Mini-Bluetooth-5.0-Digital-Amplifier-Receiver-
FIG-2

  1. Functional indicator light→

○1 Blue

|

○2 Red/Blue

|

○3 Red/Blue

| ○4 Digital signal

indication

---|---|---|---
RCA Input

instructions

| Red U disk input

Blue:Bluetooth

| Red:Optical

Blue:Coaxial

| Bright:A signal

Not bright:No signal

  1. USB interface (automatically switch and play when inserting usb flash drive)
  2. Remote receiving window
  3. Bass knob
  4. Mid knob
  5. Treble knob
  6. Encoder knob (short press to start/short press to cut chann channel again /rotate to adjust volume/long press to shut
  7. Bluetooth antenna base
  8. Analog RCA input (such as CD player, DAC decoder, mobile phone, TV,etc., red to right channel, white to left channel)
  9. Coaxial input
  10. Optical input
  11. Speaker output (red connection +/ black connection R for right channel /L for left channel)
  12. Power interface (DC voltage shall not be higher than 30V)

Remote control

DOUK-AUDIO-M1-Plus-Mini-Bluetooth-5.0-Digital-Amplifier-Receiver-
FIG-3

  1. Standby
  2. Enter the channel selection key
  3. Mute
  4. Play/Pause
  5. PREV
  6. NEXT
  7. VOL
  8. VOL+
  9. Number keys
  10. MODE1 3 is reserved key ,this product has no function

Operation steps

  1. Connect the audio source you need to use to the corresponding input interface (switch the input channel to Bluetooth when connecting to Bluetooth).
  2. The passive speaker to be used is connected to the speaker interface (red connection +/ black connection –, R connection right speaker /L connection left
  3. Connect to DC power supply (DC voltage shall not be higher than 30V).
  4. Press the encoder knob to turn on the power and switch to the required input channel.
  5. Turn the kn ob clockwise to select the desired volume and high or low volume.

Specification

Maximum output 100W*2(4Ω) THD 0.08%

Speaker impedance

matching

| ****

3-8Ω

| ****

SNR

| ****

≥98dB

Working voltage| DC 18-30V| Bare machine size| L133W128H36mm
Input sensitivity| 0.775V| The weight| 0.51kg
Frequency response| 20Hz-20KHz(±1dB)| Packing size| L300W220H70mm

Frequently asked Questions

  • I have all the wires connected, but no sound output?
1. Check whether the POWER indicator is on or not. If it is not on, turn on the key to start the machine.After pressing the power button, the indicator will still not go on. At this point, you can find one with the same voltage output power supply to te st again.
2. If the indicator light is on, check whether the VOL knob is in the minimum state; if it is in the minimum state, it will be normal if it is rotated clockwise
3. If the above two points are normal, check whether the playback device of input aud io source is paused, mute or at the minimum volume.
  • Why does the sound break?
    If the volume of the rear device is turned up to the maximum and the front level is also turned up to the maximum, it is easy to distort. At this point, you just need to turn down the volume of the front or rear level.

  • Why does the volume stay the same, but the volume is different when connected to different sources (such as a CD and then a mobile phone)?
    The amplitude of the electrical signal varies from device to devic e. For example, a mobile phone is usually 0.35V and a CD is 1V.Natural sound levels are different.

  • Why is there a lot of electrical noise from the horn?
    If you are not using the original standard power supply, please replace the power supply and test again.Many power sources in the market have a large disturbance coefficient of the text wave, which will cause a large current sound.

  • Why does the speaker make a loud buzzing sound when I plug in the input cord and don’t play the audio source?
    U sed the signal line that does not take shield empty load, can have interference signal to enter amplifier to carry on amplification, if you hate this sound to suggest you replace the signal line that takes shield, perhaps unplug signal line.

  • Does this machi ne handle phonographs/record players?
    At present, this model does not support phonograph/phonograph signal input, because the electric signal output value of phonograph/phonograph is very small, need to add a phonograph amplifier.

  • Why can’t I search for Bluetooth?
    Due to the design of the machine, when switching to other channels, the Bluetooth does not work, you have to switch to the Bluetooth channel to search.

Warning

  1. Do not open the shell without permission. Improper operation may cause electric shock.
  2. Please use the regular manufacturer’s switching power supply, otherwise the risk of damage to the machine.
  3. Do not place the machine in a high temperature and humidity environment.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Douk Audio User Manuals

Related Manuals