DOUK AUDIO MC5 PRO 2 Channel Line Mixer Headphone Monitoring Club Live Studio Recording User Manual
- May 15, 2024
- Douk Audio
Table of Contents
ONE Lite Bear
MC5 PRO 2 Channel Line Mixer
Headphone Monitoring
Club Live Studio Recording
User Manual
Introduction
MX3 I MC5 PRO is a mini audio mixer with 2 groups (MX3) I 4 groups (MC5 PRO) of 3.5mm inputs, 1 group 3.5mm AUX output and 3.5mm headphone jack output, which is capable of mixing the signals from CD players, instruments, portable recording devices, video playback devices and so on.
Features
MX3 I MC5 PRO supports two working modes to satisfy different requirements:
- Active mode: need to connect independent USB power, built-in audio amp chip will work, amplify the mixed audio signal and output larger power, can connect headphones to monitor music directly via the 3.5mm headphone jack.
- Passive mode: no power required, MX3 I MC5 PRO will work in the state of pure resistance attenuation, output audio signal will be a little attenuated. And the headphone jack output will not support headphone monitoring directly but need to add a headphone amp.
- With one main output volume knob and two(MX3) I four(MC5 PRO) independent input volume knobs, the input level of 2 groups (MX3) I 4 groups(MC5 PRO) can be controlled separately, have no interference to each other. Providing the highest sonic quality even at maximum output level.
Warm tips
- In active mode, please use independent USB power supply to power MX3 I MC5 PRO, cannot share the same power supply with audio device, or else common ground noise will be caused.
- The 3.5mm headphone jack output is prior, 3.5mm AUX output on the back panel will auto disconnect if headphone is inserted.
- Recommend to use active mode if want to connect headphone for monitoring, or else the output sound will be very small.
- Please keep wireless device such as WIFI or phone away from MX3 IMC5 PRO, or else noise may be caused.
- MX3 I MC5 PRO only supports standard audio signal such as CD DVD I phone, cannot connect phono turntables or MIC directly.
Operating mode (MX3)
Operating mode (MC5 PRO)
Parameters
Brand: Douk Audio
Model: MX3 I MCS PRO
Audio input: 2 groups of 3.Smm AUX(MX3) 4 groups of 3.Smm AUX(MCS PRO)
Audio output: 1 x 3.Smm AUX / 1 x 3.Smm headphone jack (cannot output at the
same time)
Passive mode: No power required, passive control.
Input impedance: SOK Ω
Output impedance: 4.7K Ω
Active mode:
Working voltage: DC SV (≥0.5A)
Power interface: Type-C USB
Output impedance: 3 Ω
MCS PRO Dimensions(WDH): 1096528mm / 4.292.561.lOin
MX3 Dimensions(WDH): 1359050mm / 5.313.541.97in
Contact information
Website: www.doukaudio.com
Email: nobsound@doukaudio.com
WeChat/Whatsapp: +86-17704028602
Address: Room 1329, Wang Cheng Building, Long Guan East Road, Long Hua
District, Shen Zhen, Guang Dong, China, 518000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>