narpump NP-005 Whisper Automatic Water Bottle Pump User Manual
- June 14, 2024
- narpump
Table of Contents
**narpump NP-005 Whisper Automatic Water Bottle Pump User Manual
**
INSTALLATION
- Unpack the product, the silicone hose is already inserted into the pump.
- Remove the water bottle cap so that the pump fits perfectly into the water bottle. Also compatible with glass bottle jugs.
- Place the pump on the bottle.
- Press the button to start pumping.
2-YEAR WARRANTY: We stand behind all Narpump products with a 2-year warranty and a commitment to customer satisfaction
HOW TO USE
- Please fully charge for 3 hours before use. To charge, the USB cable is plugged in and the indicator light flashes slowly. With a full charge, the pump provides 40-50 days or 6-8 bottles of water.
- Press the button one time for a 60-second fill, press and hold the button for 1.5 seconds for a continuous 10-minute fill. To turn it off, simply touch the button again.
MAINTENANCE & STORAGE
- The upper part of the pump must not get soaked.
- If your appliance will not be used for a long time. make sure there is no water inside.
- The silicone water pipe can be cleaned by dampening a microfiber cloth with carbonated water and wiping the silicone water pipe.
Wish you enjoy it.
WARNING! Due to the technical properties of the product and the instructions for use, it is obligatory to use the product only with the original charging cable provided in the package. To prevent any product damages, use only with the original charging cable supplied with the device. The brand owner or the seller will not be responsible for any damages that may arise if the pump is charged using a charging cable that belongs to another device.
BOX CONTENT
Narpump Whisper Pump: 1 piece
USB Cable: 1 piece
User Manual: 1 piece
TECHNICAL FEATURES
Model: NP-005
Power: 4 W
Voltage: DC-5V
Material: ABS + Silicone + PP
Battery Capacity: 1200 mAh
PRODUCT FEATURES
FASTEST, MOST SILENT: The Narpump Whisper Ultra
Silent Automatic Water Bottle Pump, which makes very little noise when working
thanks to its special sound insulation, can fill a 250 ml water glass in just
4-5 seconds.
BPA FREE & CE CERTIFIED: The pump is BPA-free and
has a food grade silicone hose. All Narpump products are CE-certified,
ensuring they conform with European health, safety, and environmental
standards.
CHILD LOCK: Press and hold the button on the
product for 3 seconds to start the Child Lock. When the Child Lock is on, the
pump will not operate. Press and hold again for 3 seconds to release the Child
Lock.
LONG LASTING BATTERY: The pump comes with a built-in USB rechargeable 1200 mAh Li-Ion battery with a long life, it can be used for up to 50 days (or 40 gallons of water dispensed) at full charge.
UNIVERSAL FIT: Suitable for all bottles and jugs with
a 2.16 inch (5.5 cm) neck size and cap. Please check the size of your jug neck
before your purchase. Remove the water bottle cap so that the pump fits the
water bottle perfectly.
EASY TO CARRY: The water bottle pump is compact, lightweight, and plug and play, making it easy to carry around. It is ideal for homes, garages, offices, outdoor, picnics or camping activities.
ATTENTION
- The product works in contact with water. When taken out of the box, the product does not work until it is placed in the water bottle.
- Please do not pump alcohol, petroleum, oil, and water above 130 °F (55°C) with your device.
- Please do not immerse your device in water for cleaning purposes.
- All products are tested with water after producti- on. This is why the device can be wet.
- Motor cable is fixed onto the motor, it can be damaged in case it is tried to be removed. Do not try to remove it.
- The housing of the motor that goes inside the water can be opened. You can periodically open the housing of the motor and clean it without removing
the motor cable. 7. Charge when the product performance is reduced.
WARNING!
When Narpump Whisper’s child lock is activated, the contact with water is locked. This is why the pump does not work and there is no flow of water. When you press and hold the button on the product for 3 seconds, the child lock is activated. Likewise, you can press and hold the button for 3 seconds again to deactivate the child lock.