V-TAC VT-55050 Series LED Solar Floodlight Instruction Manual

V-TAC VT-55050 Series LED Solar Floodlight

Product Information: LED Solar Floodlight

The LED Solar Floodlight is an intelligent wireless light control remote control device that comes with a time switch. It has an IP65 rating which makes it suitable for outdoor use. The product is available in three models: VT-55050, VT-55100, and VT-55200. The product operates on solar energy and has a battery operation capacity with a charging time of 4-6 hours and a working time of up to 12 hours. The product has a real lumen output of 400lm (VT-55050), 1200lm (VT-55100), and 1600lm (VT-55200) and has a panel size of 2.3 watts (VT-55050), 6.7 watts (VT-55100), and 9.6 watts (VT-55200).

Warranty Information

The product comes with a 2-year warranty from the date of purchase. The warranty only covers manufacturing defects and does not apply to damage caused by incorrect installation or abnormal wear and tear. The product should be installed by a qualified electrician, and the company provides no warranty against damage to any surface due to incorrect removal or installation of the product.

Technical Data

• Solar panel: 8-12 hours charging time
• Battery operation capacity: 4-6 hours
• Real lumen output: 400lm (VT-55050), 1200lm (VT-55100), and 1600lm (VT-55200)
• Panel size: 2.3 watts (VT-55050), 6.7 watts (VT-55100), and 9.6 watts (VT-55200)
• Working time: up to 12 hours
• Input power: DC:3.2V
• Installation height: 4-6 meters

MODEL| REAL LUMENS| LUMENS ON BOX| REAL WATTS| SOLAR PANEL WATTS| PANEL SIZE| UNIT SIZE| BATTERY CAPACITY
---|---|---|---|---|---|---|---
VT-55050| 399| 400lm| 2.3| 6W| 172x260mm| 175x210x50mm| 5000mah
VT-55100| 1095| 1200lm| 6.7| 12W| 290x350mm| 215x260x50mm| 10000mah
VT-55200| 1523| 1600lm| 9.6| 15W| 350x350mm| 215x260x50mm| 15000mah
VT-55300| 2200| 2400lm| 11.5| 20W| 450x350mm| 255x310x50mm| 20000mah
OPERATION TEMPERATURE| CHARGING TIME| WORKING TIME| INPUT POWER| INSTALLATION HEIGHT
---|---|---|---|---
-20°C to +45°C| 4-6H| 8-12H| DC:3.2V| 4-6 Meters
-20°C to +45°C| 4-6H| 8-12H| DC:3.2V| 4-6 Meters
-20°C to +45°C| 4-6H| 8-12H| DC:3.2V| 4-6 Meters
-20°C to +45°C| 4-6H| 8-12H| DC:3.2V| 4-6 Meters

Parts Included

• Remote control
• Force to turn on the lights (Optical control is null)
• High bright
• 3 hours regular
• 8 hours regular
• Force to turn off the lights (Optical control is null)

Usage Instructions

1. Before starting the installation, ensure that the power is turned off.
2. The product should be installed by a qualified electrician.
3. Avoid damaging the external flexible cable or cord of this luminaire as this can lead to hazards. If any damage occurs, it should be replaced by the manufacturer or his service agent or a qualified person.
4. The light source of this luminaire is not replaceable, and when it reaches its end of life, the whole product shall be replaced.
5. Replace any cracked protective shield immediately.
6. To turn on the lights, use the remote control.
   • Use high bright mode for maximum brightness.
   • Use 3 hours regular mode for light duration of 3 hours.
   • Use 8 hours regular mode for light duration of 8 hours.
7. To turn off the lights, use the remote control.

Please refer to the manual for further details on installation and usage. The manual is available in multiple languages and can be accessed by scanning the QR code provided on the product packaging.

WARNING!

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
5. Replace any cracked protective shield.

This marking indicates that this product should not be disposed of with other household wastes.

REMOTE CONTROL

INSTALLATION

1. Use 2 expansion screws to fix the solar panels on the wall NOTE: The battery must be fully charged before using 3-5 rainy days
2. Use 2 expansion screws to all fix the solar lamp on the wall
3. Plug the twist after the twist cap

INSTALLATION GUID

1. Before installing please remove all the parts to check if all are in good condition or not.

2. The luminaire is connected to the solar panel against the sun light. Please makes sure the solar panel is adjusted in correct angle in order to receive sunlight.

3. The remote control is designed with an operation distance of 8-15m

4. A. The lamp comes with two inflated studs as shown in the parts included section.
   B. The solar panel Angle must be adjusted in correct direction to receive sunlight.
   C. Lamps cannot be installed in low-lying areas, so as not to soak;

5. Plug the male and female plugs and tighten the waterproof cap and install it.

6. After installation test the light using the remote control.

MAINTENANCE & WARNING

• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don’t immerse in the water

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>