Zedamsan 973WP Power Bank Instruction Manual

973WP Power Bank
Instruction Manual

Product Parameters

1. Name: POWER BANK
2. Model: 973WP
3. Material: PC + ABS
4. Battery Capacity: 10000rnAh
5. .Rated Capacity: 6000mAh (5V/1A)
6. Lightning Input: 5V/2A
7. Type-C Input: 5V/3A 9V/2A 12V/1.5A
8. Type-C Output: 5V/3A 9V/2.3A 12V11.7A
9. Wireless Output: 5W/7.5W/10W/15W
10. Wireless+Type-C Output: 5V/2.5A
11. Size: 1056721mm
12. Weight: 210g

Notice Before Use

1. Fully charge your power bank before first use. If you don’t use it for a long time, please recharge the power bank at least once every 3 months.
2. Short press the power on button to check the power level. In the standby mode, it will automatically enter the hibernation state after one minute of resting.
3. Avoid direct sunlight and high temperature environment, the principle of fire and heat sources. Be careful not to use and store in an overheated, humid environment, and stop using it if it bulges.
4. Avoid contact with corrosive substances.
5. When children use the device, need to be guided by parents and follow the instructions to ensure the correct way to use the power bank. Dispose of battery according to local environmental law.

Product Features

1. Support wireless charging, just put your phone close to the power bank. Please note: Your device must support Qi function to use wireless.
2. With intelligent control circuit, it can realize overcharge/overload protection.
3. Two output ports, support 2 devices (1 Wired output, 1 Wireless output) charging at the same time.
4. It should be noted that magnetic charging is only applicable to iPhone 12 and above devices. Such as iPhonel2/13 Mini, iPhone 12/13/14, iPhone12/13/14 Pro, iPhone12/13/14 Pro Max.

Using Method

Short press the button on the left to tum on the power bank. If you need to use magnetic wireless charging, just put the mobile phone close to the lightning symbol and press the button.
Two charging methods: Wireless (magnetic) and Wired

Charging power bank using a computer or USB port

 Wireless Charging

1. Short press the button on the power bank.
2. Put your Qi-compatible phone on the power bank. (The side of the lightning symbol).
3. Remove your phone when fully charged.
4. To check the remaining battery level, press the power button.

Wired Charging

1. Connect the charging cable to your device’s charging port.
2. Connect the other end to a Type-C output port on the power bank.
3. Unplug your device when fully charged.
4. To check the remaining battery level, press the power button.

FAQs

1.Does this device support pass-through charging? if I charge the power bank via wall charging, can I charge my phone at the same time as well?

Yes, you can charge your iPhone via wired or wireless charging while the battery pack is charging.

2.What if the power bank cannot be charged?

1)Please check if the cable is damaged. 2fif the cable is not damaged, please check whether the input port is damaged. 3)If you encounter the input port is damaged, or the power bank can not be turned on, please contact us, we provide 12 months of after-sales service.

3.What models of cell phones can use the magnetic charging function of this power bank?

iPhone 14/ iPhone 14 Pro / iPhone 14 Pro Max / 14 plus, iPhone 13 / iPhone 13 Pro / iPhone 13 Pro Max / 13 mini, iPhone 12 / iPhone 12 Pro / iPhone 12 Pro Max / 12 mini (Without case or with magnetic mobile phone case).

4.What models of cell phones can use the wireless charging function of this power bank?

All phones that support 01 wireless charging function can use it, such as iPhone 8 or above models, as well as Huawei and Samsung phones. (For example iPhone 8, iPhone 8+, iPhone X, iPhone Xs, iPhone XR, iPhone XsMax, iPhone 11/12/13, Samsung s9, Samsung s9+, Samsung note9, Samsung s8, Samsung s8+, Samsung s10, Samsung s10+, Xiaomi 6, Xiaomi 8, Xiaomi 9, Xiaomi mix2, Xiaomi mix3, etc).

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC WPT exposure statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

After Sales Service

Our after-sales email is: support@kooseed.com

If you encounter any product quality problems or operation problems you can consult us, we will give you a satisfactory answer within 24 hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>