elago W02 Watch Charging Stand User Manual

elago W02 Watch Charging Stand

Product Information

• This device is designed to comply with part 15 of the FCC Rules, which sets standards for electromagnetic interference. It has been tested and found to meet the requirements for not causing harmful interference.
• The device is also compliant with FCC radiation exposure limits for an uncontrolled environment. This means it meets safety standards for the amount of radiation it emits.
• Please note that any changes or modifications to the device that are not approved by the responsible party could void the user’s authority to operate the equipment.

Product Usage Instructions

1. Ensure that the device is installed and operated with a minimum distance of 20cm between the radiator (source of radiation) and your body. This distance helps to minimize any potential radiation exposure.
2. Follow the user manual for proper installation and setup of the device.
3. If you experience any interference while using the device, it is important to know that the device must accept any interference received, including interference that may cause undesired operation. This is a standard requirement for compliance.
4. Do not make any changes or modifications to the device that have not been expressly approved by the responsible party. Such changes may void your authority to operate the equipment and could potentially affect its performance and safety.

Product Specification

Note:

1. Wireless charging only saves the function of unplugging and does not provide power energy by itself.
2. You need to connect the product to an adapter of 5V/1A or above to work properly.

Charging Operation Method

1. Connect the power adapter to the charging base and charging cable, and then connect the power adapter to the power socket; after powering on, the product indicator light will light up and go out (3 seconds to 5 seconds), please pay attention to whether the power is on (blue light).
2. Place the watch on the charging base, fit the back of the watch to the charging base, ensure that the coil is facing forward, and adjust the position until the charging indicator light appears on the watch.If the charging icon does not appear,please adjust the position to ensure a good fit until the charging icon appears;
3. During the power connection process, the watch will internally detect whether it is fully charged. If it is fully charged, it will automatically stop charging.
   Please disconnect the charger in time. If the charger is not disconnected after full charging, it will automatically charge when the battery is less than 100%.

Note:

1. If the Apple Watch is not charging, please check whether it is powered on or whether the cable is fully inserted into the product.
2. If the watch is not charging, please check to see if there are any foreign objects. (The product has foreign object detection function)

Charging Response/Compatibility

Conditions Required for Fast Charging

1. The third-party adapter requires a power of 5W and above and supports the USB-PD fast charging protocol. You can connect the magnetic charging base to realize a fast charging function for the watch.
2. The fast charging function may not work properly under conditions where the temperature is too low or too high. If you have cellular enabled on your Apple Watch, while fast charging, make sure the paired iPhone is within communication range of the Apple Watch.

Note:
Currently, only Apple watch series 7 / 8 / 9 have a fast charging function, please refer to the charging time above.

Notice:

1. Please read the instruction manual carefully before using this product and keep it properly;
2. This product only provides a data cable, and you need to use an adapter or other power source to charge the watch;
3. Please connect the wireless charger to the original power adapter with an output of 5V/1A or above, and the charging effect will be faster;
4. Please do not disassemble or modify this product without permission;
5. Do not place this product near fire sources;
6. Do not place this product in a humid environment;
7. Please do not let water or other liquids flow into the product and cause damage to the product;
8. Please do not place metal or other objects around the wireless charging area;
9. Improper use of this product may result in shortened product life or damage;
10. Do not use the charger with electronic products that do not meet the specifications to avoid any problems caused by non-compliance with the specifications.

Package Contains

1. Watch Charging Stand *1
2. Type-C Charging Cable 0.8M *1
3. User Manual *1

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>