greenworks 22122 Corded Electric Dual Action Hedge Trimmer Instruction Manual

greenworks 22122 Corded Electric Dual Action Hedge Trimmer Instruction Manual

DESCRIPTION

PURPOSE

This machine is intended for cutting and trimming hedges and bushes in domestic use. It is not intended to be used for cutting above shoulder level.

OVERVIEW

1. Blade
2. Guard
3. Auxiliary handle
4. Safety lock button
5. Trigger
6. Cord retainer
7. Rotating button

GENERAL POWER TOOL SAFETY WARNINGS

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains operated (corded) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A lapse of attention while operating power tools may result in serious personal injury.
• Use personal protection. Always wear eye protection. Protective products such as dust mask, non-skid safety shoes, hard hat or hearing protection used appropriately will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack and when picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Do not over-reach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

ELECTRICAL

WARNING
The double insulated system is intended to protect the user from shock resulting from a break in the tool’s internal insulation. Observe all normal safety precautions to avoid electrical shock.

Electrical connection

This product has a precision-built electric motor. It should be connected to a power supply that is 120 V, AC only (normal household current), 60 Hz. Do not operate this product on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not operate when plugged into an outlet, double-check the power supply.

Extension cords

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used.

When working outdoors with a product, use an extension cord that is designed for outside use. This type of cord is designated with “W-A” or “W” on the cord’s jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

A proper extension cord is available at an authorized service center.

It is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use.
Make the knot as shown in the figure, then connect the plug end of the power cord into the receptacle end of the extension cord. This method can also be used to tie two extension cords together.

More Than| Not More Than| 25′ (7.6 m)| 50′ (15 m)| 100′ (30.4 m)
---|---|---|---|---
0| 6| 18| 16| 16
6| 10| 18| 16| 14
10| 12| 16| 16| 14

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.

Check extension cords before each use. If damaged replace immediately. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

HEDGE TRIMMER SAFETY WARNINGS

• Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in serious personal injury.
• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Blades coast after turn off. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge
• DANGER – Keep hands away from blade. Contact with blade will result in serious personal injury.
• trimmer will reduce possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade may
• contact hidden wiring. Cutter blades contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the blade.
• Always store idle power tools indoors. When not in use, power tools should be stored indoors in a dry place, out of reach of children.

PROPOSITION 65

WARNING
This product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive harm. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other masonry products;
• Arsenic and chromium from chemically treated lumber

Your risk of exposure to these chemicals varies depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well- ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles

Save these instructions.

CHILD SAFETY

Tragic accidents can occur if the operator is not aware of the presence of children.

• Keep children out of the working area and under the watchful care of a responsible adult.
• Do not allow children under the age of 14 to operate this machine. Children who are 14 years of age and older must read and understand the operating instructions and safety rules in this manual and must be trained and supervised by a parent.
• Stay alert, and turn the machine off if a child or any other person enters the working area.
• Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that may obscure your view of a child who may run into the path of the machine.

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this product.
Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

low all warnings and safety instruc- tions.
| Always wear eye protection with side shields marked to comply with ANSI Z87.1 when operating this equipment.
| Thrown objects can ricochet and result in personal injury or property damage. Wear protective clothing and boots.
| Wear non-slip, heavy duty gloves.
| Keep all bystanders at least 15m away.
| Do not expose the product to rain or moist conditions.
| Danger – keep hands and feet away from blade.
| Double-insulated construction

RISK LEVELS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

avoided, will result in death or serious injury.
| WARNING| Indicates a potentially hazard- ous situation,which, if not avoided, could result in death or serious injury.
| CAUTION| Indicates a potentially hazard- ous situation, which, if not avoided, may result in minor or moderate injury.
| CAUTION| (Without Safety Alert Sym- bol) Indicates a situation that may result in property dam- age.

OPERATION

• Touch the blade carefully.
• Do not put your fingers into the notches or in position where they can get cut.
• Do not touch the blade unless you disconnect the plug from power source.
• Do not use the machine if the blade is damaged or bent.
• Remove all objects such as cords, lights, wire, or string which can become entangled in the cutting blade and create a risk of personal injury

WARNING
If the blade jams on an electrical cord or line, DO NOT TOUCH THE BLADE! IT CAN BE LIVE AND DANGEROUS. Do the steps below:

1. Hold the insulated rear handle or put the machine down and away from you.
2. Disconnect the electrically service to the damaged line or cord before you try to free the blade.

CONNECT TO THE POWER CORD

This product is designed with a cord retainer that prevents the extension cord from being pulled loose while using.

1. Form a loop with the end of the extension cord.
2. Insert loop portion of extension cord through opening in the bottom of the rear handle and place over cord retainer.
3. Slowly pull loop against cord retainer until the slack is removed.
4. Plug product into extension cord.

NOTE
Failure to remove all excess cord slack from extension cord retainer could result in plug loosening from receptacle.

START THE MACHINE

1. Attach an extension cord to your machine.
2. Place one hand on the trigger handle. Place the other hand on the auxiliary handle.
3. Slide the safety lock button (4).
4. Press the trigger (5).
5. Release the safety lock button.

WARNING
Hold the machine with two hands during operation.

NOTE
If the machine accidentally falls, it will stop and the blade will fully stop after a few seconds. The machine will then lock OFF.

CAUTION
When you operate the machine, keep the extension cord behind the machine.

TOP THE MACHINE

1. Release the trigger to stop the machine.

TURN THE REAR HANDLE

You can use the rotating button to adjust the rear handle to 5 different positions to cut the hedges easier.

1. Press the rotating button and turn the rear handle.
2. Release the rotating button until it locks into position.

OPERATION TIPS

• Do not push the machine through heavy shrubbery. This can cause the blade blockage. If the blades blocks,

1. stop the machine.
2. Disconnect the plug from power source.
3. remove the blockage

• Do not try to cut too large stems or twigs.
• Wear the gloves when you cut.
• Cut the new growth with a wide sweeping action so that the stems are put directly into the blade.
• You can use a string to adjust the height of the hedge.

1. Stretch a piece of string along the hedge at this height.
2. Cut the hedge immediately above this string.
3. Cut the side of a hedge until it will be narrower at the top. More of the hedge will come into view in that way.

MAINTENANCE

CAUTION
Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic serviceable.

CAUTION
Do not use strong solvents or detergents on the plastic housing or components.

WARNING
Pull the mains plug out of the socket before maintenance.

CLEAN THE MACHINE

WARNING
Keep the machine and the motor free of leaves, branches or excessive oil to prevent fire risks.

• Use a moist cloth with a mild detergent to clean the machine.
• Clean all moisture with a soft dry cloth.
• Use a small brush to clean the air vents.

LUBRICATE THE BLADE

To increase the efficiency and life of the blades, lubricate them carefully after each work session:

• Put the machine on a flat and smooth surface.
• Use a soft cloth to clean the blades and a brush to remove more dirt.
• Use a light layer of oil to lubricate the blades along the top edge of the blade.

NOTE
We recommend to use the non-pollutant type oil.

STORE THE MACHINE

• Clean the machine before storage.
• Make sure that the motor is not hot when you store the machine.
• Make sure that the machine does not have loose or damaged parts. If it is necessary, do these steps/ instructions:
  • Replace the damaged parts.
  • Tighten the bolts.
  • Speak to a person of an approved service center.
• Store the machine in a dry area.
• Make sure that children cannot come near the machine.

TROUBLESHOOTING

Plug in cord
Cord or switch is damaged.| Have cord or switch replaced.
The machine smokes during operation.| The machine has damage.|

1. Immediately stop the machine.
2. Disconnect the plug from power source.
3. Speak to service center.

The motor is on, blades do not move.| The machine has damage.| Do not use the machine and speak to service center.
The blades are blocked.| Disconnect the plug from power source then clear blockage from the blades.
There is too much noise and/or vibration during operation.| The parts are loosen.|

1. Stop the machine.
2. Disconnect the plug from power source.
3. Inspect for damage.
4. Check and tighten loose parts.

The parts have damage.| Do not use the machine and speak to service center.

TECHNICAL DATA

LIMITED WARRANTY

Greenworks hereby warranties this product, to the original purchaser with proof of purchase, for a period of three (3) years against defects in materials, parts or workmanship.

Greenworks, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for units which have been used for personal use that have not been hired or rented for industrial/commercial use, and that have been maintained in accordance with the instructions in the owners’ manual supplied with the product from new.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in accordance with the owner’s manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade sharpening;
5. Normal deterioration of the exterior finish due to use or exposure.

HELPLINE:
Warranty service is available by calling our toll-free helpline, at 1-888-909-6757.

TRANSPORTATION CHARGES:
Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. It is the purchaser’s responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by Greenworks.

EXPLODED VIEW

References

• Greenworks Outdoor Power Equipment, Lawn & Garden Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>