TILTA X4 Full Camera Cage Instruction Manual
- August 19, 2024
- TILTA
Table of Contents
TILTA X4 Full Camera Cage
DISCLAIMER
Thank you for purchasing TILTA products.
- Before using this product, please carefully read this document to ensure that the product has been set up correctly. The final interpretation of this document and all related documents for this product belongs to TILTA. For updates, please visit the official website at www.tilta.com for the latest product information. TILTA reserves the right to modify any information in this manual at any time without prior notice and without assuming any responsibility.
- By using this product, you are deemed to have carefully read the disclaimer and warnings, understood, agreed, and accepted all the terms and content of this statement. You promise to take full responsibility for the use of this product and any consequences that may arise. You commit to using this product only for legitimate purposes and agree to these terms as well as any related regulations, policies, and guidelines set by TILTA.
- TILTA is not responsible for any damages, injuries, or legal liabilities caused directly or indirectly by the use of this product. Users should follow all safety guidelines mentioned in this document, including but not limited to those mentioned.
- Despite the above provisions, consumer rights are still protected by local laws and regulations and are not affected by this disclaimer.
- TILTA is a trademark of Shenzhen TILTA Technology Co., Ltd. and its affiliated companies. Product names, brands, and other trademarks appearing in this document are trademarks or registered trademarks of their respective companies.
SPECIFICATIONS
- Product Name: Tilta Full Camera Cage for Insta360 X4
- Packing List: Tilta Full Camera Cage for Insta360 X4 x1 Lens Silicone Protective Cover x1
- Color: Black
- Material: Aluminum Alloy & SUS304 & Silicone
- Dimensions: 140.55 x 60.2 x 25.8mm/5.53 x 2.37 x 1.02 inches
- Weight: 81g/0.2 lbs
Overview
- Rotating Support Cover
- Top Cover
- Top Cover Lock
- 1/4″-20 Thread with Locating Point
- Cold Shoe Receiver
- GoPro Folding Mount
COMPONENTS
- Rotating Support Cover
Can rotate 90° from a to b (or from a to c )
Top Cover
- Press the lock;
- The top cover will automatically open;
- Press the top cover down until it automatically locks.
INSTALLATION & USAGE
Setup
- Press the top cover lock
- Open the top cover,
- Insert the camera (align the screen side with the “SCREEN SIDE” label on the cage):
- Close the top cover and ensure the top cover lock is securely locked.
Protective Cover
Installing the protective cover protects the camera lens.
Note
The full cage and lens silicone cover do not affect the installation and
removal of batteries and micro SD cards on both sides of the camera.
CAUTION & WARNINGS
- When placing the camera on a table or other surface, rotate the support cover to 90° to protect the lens.
- Ensure the support cover is rotated to 90° (not less than 90° to avoid tipping) and place it on a flat, debris-free surface to prevent scratching the lens.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>