Digital Watchdog DWC-DSCM Ceiling Mount Bracket for Dual Sensor Dome Cameras User Guide
- June 13, 2024
- DIGITAL WATCHDOG
Table of Contents
Digital Watchdog DWC-DSCM Ceiling Mount Bracket for Dual Sensor Dome
Cameras
Product Information
The Ceiling mount bracket for the DWC-PDS10Wi28A dual-sensor vandal dome cameras (DWC-DSCM) is a mounting accessory designed to securely mount the camera to a ceiling surface. It comes with camera mounting screws, a mounting pad, a quick setup guide, a mounting template, screws, and plastic anchors. For additional support and resources, you can visit the Digital Watchdog website at www.digital-watchdog.com/resources. You can search for your specific product by entering the part number in the search bar to access manuals, quick-start guides, and other relevant materials.
Product Usage Instructions
- Using the provided mounting template or the mounting bracket itself, mark and drill the necessary holes in the ceiling surface where you want to install the camera.
- Securely attach the mounting bracket to the ceiling surface using the screws and plastic anchors included with the mount.
- Use the mounting pad between the bracket’s arm and the mounting surface if required.
- To mount the camera to the mounting accessory, use the wrench included with the camera to remove the dome from the camera. Be careful not to touch the lens while handling the camera.
- Pass the necessary wires through the mounting bracket and make all the required connections.
- Securely attach the camera to the mounting bracket using the provided screws.
- Adjust the position and angle of the camera’s lens modules as desired. Once done, place the cover dome on the camera base to complete the installation.
WHAT’S IN THE BOX
NOTE : Download all your support materials and tools in one place.
- Go to: http://www.digital-watchdog.com/resources
- Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
- Click ‘Search’. All supported materials, including manualsand quick start guides (QSGs), will appear in the results.
INSTALLATION
-
Using the mounting template or the mounting bracket itself, mark and drill the necessary holes in the mounting surface.
-
Secure the mounting bracket to the mounting surface using the screws and anchors included with the mount. Use the mounting pad between the bracket’s arm and the mounting surface as needed.
-
To mount the camera to the mounting accessory, remove the dome from the camera using the wrench included with the camera
NOTE: Do not touch the lens when handling the camera. -
Pass wires through and make all necessary connections.
-
Secure the camera to the mounting bracket using the included screws.
-
Adjust the camera’s lens modules’ position and angle and place the cover dome on the camera base to complete the installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>