Sainlogic QT-06 Smart Water Valve User Manual

June 14, 2024
Sainlogic

Sainlogic QT-06 Smart Water Valve User Manual
Sainlogic QT-06 Smart Water Valve

Performance and instructions

Smart water valve
Remote operation: remote control of mobile APP anytime and anywhere, manual control of field devices, and timing control of APP
Signal distance: the open distance between gateway and smart water valve is ≤50 meters.

Battery: 4*AA alkaline dry batteries are used.
Protection grade: IP66. Smart water valve can be installed and used outdoors.

Instructions for use

  1. One gateway can be connected with 8 smart water valves.
  2. The open distance from the gateway to the smart water valve is ≤50 meters, and the partition wall distance is ≤20 meters (determined according to the actual installation environment).
  3. Zigbee signal cannot be relayed and jumped through smart water valve.
  4. After setting the timing, if the smart water valve is offline, it will be watered according to the timing program.
  5. Operational requirements of water flow meter: the water flow rate is at least 2L/ min, and the water flow is too small to drive the flow meter to work. There will be a false alarm of “water shortage warning”.
  6. Statistics will be recorded only when the smart water valve is online for historical records.
  7. Water shortage reminder: When the water valve is opened and there is no water, the water shortage warning will be prompted after 15 seconds in the connected state.
    Instructions for use

Metal joint
Practical and more durable Tighten the non-slippery wire back and forth.
Metal joint

Note: Please wear gloves when installing or disassembling to prevent your hands from being scratched

Product parameters

Product parameters

|
---|---
Product name| Smart water valve (Zigbee)
Caliber| ½”or ¾”&1″
Waterproof level| Ip66
Withstand water pressure| 0.2~8bar
Power| 4*AA alkaline dry battery
Operating temperature| -10℃~+50℃
Working humidity| 0-90%RH No condensation
Power| DC5V/1A
Signal range| Open area ≤ 50 meters

Operation Guide

  1. Scan the QR code to download the “Smart Life” app,
  2. Register a member account.
    Input your mobile phone number or email address.
    Receive the verification code SMS. Configurate your own passwo
    QR code

Gateway networking tutorial

  1. Open the APP and click add device or “+”in the upper right corner,
    Gateway networking tutorial

  2. Select gateway central control → wireless gateway (zigbee),
    Gateway networking tutorial

  3. Enter WiFi account and password (2.4Ghz),
    Gateway networking tutorial

  4. Check to confirm that the indicator light is flashing, and EZ mode is in the upper right corner,
    Gateway networking tutorial

  5. Next, enter the interface of adding equipment ,
    Gateway networking tutorial

  6. Wait a moment and add successfully.
    Gateway networking tutorial

Gateway adds and connects intelligent water valve

  1. Open the gateway interface and select “+Add Subdevice”.
  2. Confirm whether the indicator light of the intelligent water valve flashes (press and hold the switch button of the intelligent water valve for 5 seconds, and the indicator light switches from long on to flash or extinguish).
  3. Automatically search for equipment, and click Finish after searching for the equipment.
  4. If the addition is successful, click the name of the brush to modify it.
    Gateway adds and connects

Mobile APP Interface

It’s easy to understand and operate

Mobile APP Interface

Warranty Regulations

  1. The warranty period of this product is one year.
  2. During the warranty period, any failure occurred under normal use according to the instruction manual (judged by the official staff of our company) shall be repaired free of charge.
  3. During the warranty period, if one of the following situations occurs, it must be repaired as a charge:
  4. This guarantee and valid purchase certificate cannot be provided.
  5. Faults and damages caused by incorrect use and improper repair by oneself.
  6. Failure or damage caused by transportation, moving and falling after receiving goods.
  7. Damage caused by other inevitable bad factors.
  8. Failure or damage caused by equipment soaking in water.
  9. If the temperature is lower than 0℃, please disassemble and put it back indoors. If the equipment is damaged due to this problem, there is no warranty.
  10. We only make the above warranties, and do not make any other express or implied warranties (including implied warranties of merchantability, rationality and adaptability to a specific application, etc.). Our company is not responsible for any special, accidental or indirect damages, whether in contract, civil negligence or other aspects

Product Warranty Card

Product Warranty Card 

Sainlogic Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals