AMADA AMFS13-W For Floating Tablets Instruction Manual
- June 14, 2024
- AMADA
Table of Contents
AMADA AMFS13-W For Floating Tablets
Product Information
Thank you for choosing this AMADA product! At AMADA, we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us at [email protected].
Important Safety Information
Tools Needed (NOT included):
- Stud Finder
- Level
- Pencil
- Philips Screwdriver
- Drill
- 5/64(2mm) Wood Drill Bit
- 1/4(6mm) Concrete Drill Bit
- Hammer
Supplied Parts and Hardware:
- Board (A) x1
- Board (B) x1
- Board (C) x1
- Long Lag Screw M4x50mm (D) x3
- Short Lag Screw M4x35mm (E) x6
- Wall Anchor 13x42mm (F) x6 (for drywall ONLY)
- Wall Anchor M6x30mm (G) x6 (for concrete or brick walls
ONLY)
Product Usage Instructions
-
Step 1: Secure the Lag Screws to the Wall
Before installation, please identify your wall type. For wood stud installation, follow step 1A. For drywall installation, follow step 1B. For solid concrete and concrete block walls installation, follow step 1C. -
Step 1A: For Wood Stud
For wood stud mounting, wall anchors [F] and [G] are NOT necessary.
[Needed for Wood Stud] Drill holes at a distance of 1 21/32(42mm) apart.
For Long Lag Screw (D), tighten them directly into the wood stud. -
Step 1B: For Drywall
Drill holes at a distance of 5/16(8mm) apart on the drywall.
Insert wall anchor [F] into each hole.
Tighten Short Lag Screw (E) into each wall anchor [F] until the head of the screw protrudes 5/16(8mm) from the wall. -
Step 1C: For Solid Concrete and Concrete Block Walls
Drill holes at a distance of 1 3/8(35mm) apart on the concrete or brick wall.
Insert wall anchor [G] into each hole.
Tighten Short Lag Screw (E) into each wall anchor [G] until the head of the screw protrudes 5/16(8mm) from the wall. -
Step 2: Secure the Boards onto the Lag Screws
Hang the board (A, B, or C) onto the two screws.
Pull down on the board to secure it in place.
Maximum weight capacity: 5KG (11LBS)
Repeat this step for each board.
Thank you again for choosing this AMADA product!
Merci d’avoir choisi ce produit AMADA! All of us at AMADA do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us at [email protected].
IMPORTANT SAFETY INFORMATION
- Check package contents against supplied parts and hardware list to ensure that all components were received undamaged. DO NOT use damaged or defective parts. lf you require replacement parts, please contact AMADA customer service at [email protected].
- Carefully read all instructions before attempting installation. If you DO NOT under-stand the instructions or have any concerns or questions, please contact customer service at [email protected].
- NOT all parts and hardware included will be used.
- DO NOT use this product for any purpose that is NOT specified in this manual. DO NOT exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. Thank you for your understanding.
Tools Needed
(NOT included)
Supplied Parts and Hardware
INSTALLATION
-
Step 1 Secure the Lag Screws to the Wall
Before installation, please identify your wall type.
For wood stud installation, follow step 1A.
For drywall installation, follow step 1B.
For solid concrete and concrete block walls installation, follow step 1C.
Step 1A For Wood Stud
Step 1B For Drywall
Step 1C For Solid Concrete and Concrete Block Walls -
Step 2 Secure the Boards onto the Lag Screws
Thank you again for choosing this AMADA product!
All of us at AMADA do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us at [email protected].
860-00199-00 Rev00