EIOEIR HC-20G Cordless Stick Vacuum Cleaner Instruction Manual

EIOEIR HC-20G Cordless Stick Vacuum Cleaner

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

1. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
2. Make sure the power switch is off and the battery pack is removed before clearing jammed material, making adjustments, changing accessories, storing or servicing the appliance. Unexpected actuation of the appliance while clearing jammed material or servicing may result in serious personal injury.
3. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
4. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
5. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
6. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
7. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
8. Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.
9. Do not power on the power adapter for a long time.Unplug the power adapter from the power outlet when not in use.Do not use the appliance outdoors or in places with water.
10. This product is not allowed to be used as a toy. When using the machine, if there are children around, please pay special attention to safety and use the machine correctly according to the instruction manual.
11. Keep the power adapter away from the surface of the heating / heating source, do not hold the power adapter or the machine with wet hands. Do not put any large objects into the suction port of the vacuum cleaner.
12. Do not block the mouthpiece, keep the mouthpiece away from lint, large amounts of hair, and any objects that may clog the mouthpiece. Keep hair, loose clothes, fingers, and all body parts away from the mouthpiece and movable parts during use to avoid being caught or tangled live.
13. Do not suck inflammable or smoky things such as cigarettes, matches, or soot.
14. Before plugging in the power adapter, please turn off the switch of the machine.Do not suck flammable materials or liquids, such as gasoline or places where there may be gasoline.
15. Follow the instructions on the vacuum cleaner and keep openings such as takeovers away from your face and body.
16. Do not use a vacuum cleaner without a filter device.Turn off the machine before connecting or replacing accessories.
17. Store the vacuum cleaner indoors and use it only in dry rooms.
18. If the power adapter is damaged, in order to avoid danger, it must be repaired and replaced by professionals such as the manufacturer and the maintenance department

PRODUCT COMPOSITION

1. Speed adjust button
2. Power indicator
3. Dust cup subassembly
4. Metal Tube Release Button
5. Metal Tube
6. Power Brush Release Button
7. Power Brush
8. Charging port
9. Power switch
10. Dust cup release button
11. Dust cup bottom cover release button
12. Combination accessory nozzle
13. Crevice nozzle
14. Wall bracket
15. Charger
16. Hair scraper
17. Removable air outlet filtration system

HOW TO INSTALL

1. Installation of Dust cup
   Insert the hook on the bottom of the Dust cup into the corresponding part of the main unit and rotate in the direction indicated by the arrow until you hear the “click” sound.

2. Connecting the Power Brush to the metal tube
   Insert the Power Brush fitting into the metal tube connector until it clicks into place.

3. Connection of metal tube to hand-held assembly
   Insert the metal fitting into the joint of the hand-held assembly and hear the “click” sound to lock it in place.

4. Connection of the Power Brush to the hand-held unit
   Insert the Power Brush connector into the joint of the hand-held assembly until it clicks into place.

5. Connection of accessories to the hand-held unit
   Insert the accessory into the hand-held unit’s joint until you hear a click to lock it in place.

6. Using the wall bracket
   Take out the base of wall bracket and fix it to the wall with 2 expansion screws, the height of the bracket should be as shown in the picture below, and the Power Brush should touch the floor when the machine is placed on it.

HOW TO USE

1. Power on / off
   Install the machine, Press switch on to turn on the machine, and then press the+/- botton to switch between high and low 3 speed.

2. The use of accessories (the use of2-in-1 combination brush)

   • Insert the 2-in-l brush into the unit joint, and then push the brush head of the 2-in-l brush forward until it locks, then you can clean furniture, home appliances, bookshelves, cabinets, dressers, computer keyboard and other places.
   • Insert the 2-in-l crevice nozzle into the unit joint, and then push the brush head of the 2-in-l flat brush backward to the end, and then you can clean up beds, curtains, sofas and other places.

3. The use of accessories (use of crevice nozzle)
   Insert the crevice nozzle into the main unit joint to clean up sofa cracks, wall skirting and other places.

4. Use of Power Brush
   First insert the Power Brush into one end of the conductive tube, and then insert the other end of the conductive tube into the unit joint, then you can clean the floor, carpets, tiles and other places.

5. Vacuum cleaner charging

   • This machine can only be charged with its own charger, please check the charger before charging.
   • Plug the charger into the power outlet and plug the output into the charging socket of the machine to charge, the indicator light will show “white” during charging and the three lights will flash in sequence. The three indicator lights show “white” when full.
   • When the battery is low, please charge the battery in time and unplug the charger when the battery is fully charged.

CLEANING AND REPLACE PARTS

1. Clean after daily use
   Press the dust cup cover release button to open the bottom cover and pour out the dust.
   ( Tips : clean attereverytime use, for better performance).

2. Dust cup cleaning
   

   • Grasp the Dust cup with one hand and the Dust cup top cover assembly with the other hand and rotate counterclockwise until the dust cup top cover assembly can be removed upward. (as shown)
   • Press the dust cup cover release button on the opposite to separate the dust cup assembly from the hand-held assembly, and then press the dust cup cover release button to open the bottom cover, then you can pour the dust.
   • Turn the filter in the direction of the arrow until it can be pulled out to clean or replace the filter.
   • Please put the cleaned filter piece in a ventilated place and dry it fully before using it (when cleaning the filter piece, soak it in soapy water first and then rinse it with clean water, and do not rub it repeatedly to avoid damaging the internal structure of the filter piece). (as shown)

3. Power Brush cleaning
   

   • Push outward the right button on the back of the brush and lift the slide knob (The accessories are small and easy to lose, please keep them safely).
   • After removing the rollers, use the scraper to remove hair and other dirt from the rollers, assemble them in reverse order of disassembly, and reset the roller brush cover.

Note : After long time use, the bristles of the roller brush may entangle hair and other long flocculent materials, which need to be cleaned in time so that the vacuum cleaner can work more effectively.

TROUBLESHOOTING

GUARANTEE AND SERVICE
Please contact the Customer Service via email for any further queries. The guarantee becomes invalid in the case of misuse, alteration or repair by unauthorized persons

TECHNICAL SPECIFICATION

• Model : HC-20G
• Power : 200W
• Capacity : 0.5L
• Charging Time : 4~5H
• Suction Power : 6kpa/9kpa/17kpa
• Working Time : 45Minute/25Minute/12Minute
• Input Voltage : DC22.2V 500mA

Thank you for choosing EIOEIR! We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.

E-mail Support: eioeirservice@outlook.com

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>