SECOMP 14993582 1×2 HDMI Splitter 4K 60Hz Installation Guide

June 14, 2024
SECOMP

SECOMP 14993582 1×2 HDMI Splitter 4K 60Hz

SECOMP-14993582-1x2-HDMI-Splitter-4K-60Hz-product

All brand names and trademarks are properties of their respective owners

SYSTEM REQUIREMENTS

  • DMI-equipped source devices such as a DVD/Blu-ray play
  • HDMI-equipped displays (TVs or monitors) with HDMI cables

PANEL DESCRIPTIONS

SECOMP-14993582-1x2-HDMI-Splitter-4K-60Hz-fig-1

HDMI OUTPUT: Connect each of the output ports to the HDMI display for simultaneous HDMI distribution.
LINK LEDs: These LEDs will illuminate when the HDMI outputs are connected to the display with the signal display on the screen.
HDMI INPUT: Connect the input port to the HDMI or DVI output of your source equipment such as a DVD player or set-top box.
INPUT LED: The input LED will illuminate when connected to an HDMI source.
POWER LED: The power LED will illuminate when the unit is powered. 5 V/1A DC: Connect the 5 V/1A DC power supply to the splitter and Plug the adaptor into the AC wall outlet.

CONNECTION DIAGRAM

SECOMP-14993582-1x2-HDMI-Splitter-4K-60Hz-fig-2

INTRODUCTION

The HDMI Amplifier Splitter is an HDMI splitter with some outputs. It distributes the input of the HDMI signal into several identical outputs simultaneously. The series of this product has the ability of buffering and amplifying. Each amplifier splitter’s output can achieve long-distance transmission of HDMI signal. When two or more products are cascaded, they can create a larger distribution and longer.

The HDMI Amplifier Splitter offers solutions for HDTV retail and show sites, HDTV, STB, DVD and Projector factories, noise, space and security concerns, data centre control, information distribution, conference room presentation, and school and corporate training environments.

APPLICATIONS

  • Simultaneously display one HDMI source on two TVs/projectors
  • Showroom display
  • University lecture hall display
  • Retail sales display
  • Commercial presentation switcher/scaler

FEATURES

The series of HDMI Amplifier Splitters have many features that enable them to perform in a superior manner. Among those features you will find:

  • Easy to Use: Install in seconds, no need of setting.
  • HDMI Specification 2.0 Compliant.
  • Integrated HDCP decryption/encryption engines that are compliant with HDCP Rev. 1.4 Specification.
  • Wide Frequency Range: 25MHz – 450MHz.
  • Supports 12-bit Deep Full HD, Full 3D and 4K2K 60Hz video.
  • Supports Standard Audio, DSD Audio and HD (HBR) Audio.
  • Cascaded: Large distribution achieved by cascading the HDMI Amplifier Splitter.

PACKAGE CONTENTS

  • 1 x set 1×2 HDMI Splitter 4K 60Hz
  • 1 x 5 V/1A DC Power Supply Adaptor
  • 1 x User Manual

OPERATION

  1. Connect the input port of this HDMI Splitter to the HD source.
  2. Connect the HDMI cables from your displays (monitor or projector) to the outputs of this Splitter.
  3. Then the HDTV signal will be distributed to each HDTV display.

SPECIFICATIONS


Signal Inputs/Output

|
---|---
Input Video Signal| 0.5 -1.0 volts p-p
Input DDC Signal| 5 volts p-p (TTL)
Maximum Single Link Range| 4K2K@60Hz
Output Video| HDMI 2.0 + HDCP1.4


Video format supported

|
DTV/HDTV| 480i/576i/480p/576p/720p/1080i/1080P/2160P


Digital Signal I/O

|
HDMI Compliance| HDMI 2.0
Operating Frequency| Up to 450MHz


Resolutions (HDTV)

|
Interlaced(50&60Hz)| 480i,576i,1080i
Progressive(50&60Hz)| 480p,576p,720p,1080p,2160p


Mechanical

|
Size| 95x82x24.5mm
Power Requirement

External Power Supply

| V DC

Note: When displaying a 3D signal with higher bandwidth than 225MHz or a 4K2K resolution source, a High-Speed HDMI cable is required.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SECOMP User Manuals

Related Manuals