TECKNET WA659 Wireless Doorbell User Manual
- June 14, 2024
- TECKNET
Table of Contents
- Package Contents
- Product Layout
- Product Specification
- Receiver Instructions
- To Change the Chime
- To pair the device
- Delete pairing method
- Receiver and Transmitter Installation
- Maintenance
- IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.
- SIMPLIFIED EU DECLARATION OF CONFORMITY
- Limited 12-Month Warranty
- FCC STATEMENT:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Doorbell
Model: WA658/WA659
User Manual
Package Contents
Product Layout
① LED Indicator
② Music+ Button| ③ Volume Button
④ Music- Button
---|---
Product Specification
Receiver Power Supplied: | AC 100V-240V |
---|---|
Receiver Working Current: | <5mA |
Transmitter Working Voltage: | DC 3V |
Working Frequency: | 433MHZ±2MHZ |
Transmission Power: | 10 dBm |
Receiver Instructions
Simply put the receiver into the socket, there will be a warning tone “Ding- Dong” showing the receiver is on.
To Change the Chime
This can be done before or after pairing
- Plug in the receiver, there would be a chime prompt.
- Simply press Music + or Music – to play through the different chimes included in the receiver.
- Once you have found the chime you like simply let it play,
A. If your transmitter is paired, the next time it is pressed it will play your selected chime.
B. If it doesn’t however, please follow the instructions for deleting the paring history. Choose your chime again and then re-pair as instructed above.
To pair the device
- Plug in the receiver.
- Press the Music + (the top button) and the volume buttons (central circle) together, the LED will light up.
- Then release the buttons simultaneously.
- While the LED is on, press the transmitter button once, the LED on the receiver will flash once.
- Afterwards, press the volume button (central circle) again to finish pairing.
Delete pairing method
- Unplug the receiver.
- Press and hold the volume button (central circle) and plug the receiver in. DO NOT release the button for 5-10 seconds, meanwhile the LED will start flashing.
- Then release the button after LED turns off.
- The previous paring mode is removed and confirmed when you hear a ring tone.
Receiver and Transmitter Installation
Apply the double-sided adhesive tape on the back of receiver/transmitter case.
Remove the outer side of tape, attach the receiver / transmitter to the
position you need and press hard for 32 seconds.
Maintenance
- Ideally, use high quality alkaline batteries which will last longer and reduce the chance of electrolyte leakage.
- In order to protect the precise internal electronic components, unqualified users should not attempt to open the unit for maintenance.
- Do not expose the product to continuous direct sunlight or humid environment this will harm the product.
- Correct use of the products helps to effectively extend the service life of the unit.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.
- SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings othe product, accessories and device using our product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion may occur.
- For proper insertion, please observe polarity indicators ( +/-).
- Remove the batteries if the product is not going to be used for a long period of time.
- Do not place product in or near inflammable, explosive or hazardous object.
- The doorbell is waterproof to some extent, it still needs some protection so that it will be durable. So please do not place in or neawater, rain, excess moisture or extreme heat.
- Do not operate product with damaged cord or plug.
- Do not operate product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
- To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type
WA658/WA659 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://eu.tecknetonline.com/
Limited 12-Month Warranty
What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to
the original purchaser of this TECKNET product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.
What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of
charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided
to Unichain for inspection upon Unichain’s request at the sole expense of the
purchaser, or if Unichain determines that the TECKNET product has been
improperly installed, altered in any way, or tampered with. The TECKNET
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website or email
support@tecknetonline.com for more
information. To extend the warranty period, please visit TECKNET website and
register your TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
Correct Disposal of This Product:
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contact. This product should not be mixed with
other commercial wastes for disposal.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>