HYCHIKA ML-CS46-36 Cordless Screwdriver Instruction Manual

HYCHIKA ML-CS46-36 Cordless Screwdriver

Product Information

Specifications

• Model: ML-CS46-36
• Type: Cordless Screwdriver
• Manufacturer: Zhejiang Minglei Tool Industrial Co., Ltd.
• Charging: USB charging cable compatible
• Warranty: 365-day extended warranty available

FAQ

• Q: Can I use the cordless screwdriver for heavy-duty tasks?
  • A: The cordless screwdriver is suitable for light to medium-duty tasks. For heavy-duty tasks, consider using a more powerful tool.
• Q: How long does it take to fully charge the screwdriver?
  • A: The charging time may vary, but typically it takes around 2-3 hours to fully charge the cordless screwdriver.
• Q: Is it safe to leave the screwdriver charging overnight?
  • A: It is recommended not to leave the screwdriver charging unattended or overnight to prevent overcharging and potential safety hazards.

If any problems, please contact our after-sales email: [email protected]

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.

Specification

Product Features

1. Keyless Chuck
2. LED light
3. Forward/Reverse Switch
4. Trigger Switch
5. Spindle Lock Button
6. Soft Grip Handle
7. Charging socket
8. LED Display
9. Flashlight Button
10. Flashlight

General Safety

WARNING:

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING:

This appliance is not intended for use by persons (including children) with reduced, physical or mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

   • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
   • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
   • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

   • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
   • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
   • When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
   • If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

   • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
   • Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
   • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
   • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
   • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations
   • Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
   • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

   • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
   • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   • Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
   • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
   • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
     WARNING: When used in Australia or New Zealand, it is recommended that this tool is ALWAYS supplied via Residual Current Device (RCD) with a rated residual current of 30mA or less

5. Battery tool use and care

   • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack
   • Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
   • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
   • If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
   • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6. Service

   • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

• Before putting the unit into operation, read and observe the instructions for use.
• NOTICE! Risk of damage to the unit! Do not allow the battery pack to deep discharge.
• Note: The Li-lon battery pack can be charged at any time without affecting the lifetime of the unit. Interrupting the charging process will not damage the battery pack.
• Risk of damage to the eyes! Never look directly into the LED.
• NOTICE! Risk of damage to the unit! Do not press the On/Off switch after the device has deactivated automatically

The battery pack must be charged prior to the first start-up

1. The USB charging cable can be connected to a computer, powerbank and wall USB port for charging.
2. After the power is turned on, the indicator light of the machine flashes green 3 times, and then turns to a steady red light for charging, When the green light is steady, it means it is fully charged.

Operation

• Charging states: Only red lights up when charging
• Spindle lock: This tool is fitted with a spindle lock so that is can be used as a normal screwdriver. Use the tool this way to loose very tight screws of firm tighten screws.

Inserting bits

1. Push the keyless chuck and insert the bit in the bit holder,then release the keyless chuck.
2. Pull on the bit to check that it is properly fitted and does not come loose.

Removing bits

1. Push the keyless chuck and pull the bit out of the bit holder.

Changing the rotation direction

_ NOTICE:  _Risk of damage to the unit! Only use the rotation direction switch when the device is at a standstill

1. To screw screws into place, press the Forward/Reverse Switch to the forwards (rotation in clockwise direction).
2. To remove screws, press the Forward/Reverse Switch to the backwards (rotation in an anti-clockwise direction).

If the rotation direction switch is in the centre position, the Trigger Switch is blocked.

Check before switching on!

Check to make sure the device is in a safe operating condition:

• Check to make sure there are no visible defects.
• Check to make sure all device components are correctly mounted.

Switching on and off

• To start the tool turning, press the Trigger Switch
• The LED will light up.
• To switch the unit off, release the Trigger Switch

Screwdriver action

• Keep the device in a straight line to the screw.

Note: Always use the screw bit designed for the screw. If you use the incorrect bit, you may damage the head of the screw.

Cleaning

Cleaning overview

Regularly and according to the operating conditions

Preparing for disposal

Disposal

Disposal of the appliance

• Appliances which are label led with the adjacent symbol must not be disposed of in household waste.
• You must dispose of such old electrical and electronic equipment separately.
• Please check with your local authority about the possibilities for correct disposal.
• Through separate disposal you send old equipment for recycling or for other forms of re-use. You will thus help to avoid in some cases that damaging material gets into the environment.

Disposal of the packaging

• The packaging consists of cardboard and correspondingly marked plastics that can be recycled.
• Make these materials available for recycling.

Disposal of batteries and accumulators

Disused batteries and accumulators do not belong in domestic refuse; they must be disposed of as prescribed by regulations.

• Bring batteries which are no longer usable to the battery collection point of the dealer or of your local authority.
• Do not burn accumulators. Risk of explosion

DECLARATION OF CONFORMITY

Contacts

Scan to get the 365-day extended warranty today!

• Manufacturer: Zhejiang minglei Tool industrial Co., ltd.
• ADD: No.188 Yindong North Road, Yinzhou District, Ningbo, 315100, Zhejiang, China
• After-sales email: [email protected]

European Representative:

• CET PRODUCT SERVICE SP. Z O.O.
• Ul. Dluga 33 102 Zgierz 95-100 Polen
• Tel: +4971416432236
• E-mail：[email protected]

British Representative

• CET Product Service Ltd.
• Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK
• Tel： +44 7419325266
• E-mail: [email protected]

Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>