HYCHIKA 19 Pcs Hole Saw Set Kit Instructions
- June 14, 2024
- HYCHIKA
Table of Contents
HYCHIKA 19 Pcs Hole Saw Set Kit
Product Information
- Specifications
- Suitable Materials: Timber, plastic, and plaster
- Not Suitable for Metal and fibre cement sheeting
- Configuration List
- There is a picture on the right that shows the specific installation methods.
Product Usage Instructions
- Installation Method
- Please refer to the picture on the right for the specific installation methods.
- Precautions for Use
- Working Surface and Drilling Angle
- Ensure that the hole saw is perpendicular to the working surface when drilling. Drilling at an angle may cause damage to the drill bit.
- Working Speed
- Different materials require different working speeds. Please work at the recommended speed for the specific material you are cutting.
- Note: Larger hole saws are recommended to be used at slower speeds to maximize their lifespan. Make sure to sharpen the pilot regularly.
- Eye Safety
- It is highly recommended to wear goggles for eye safety when using the hole saw.
- Cutting Efficiency
- To maintain cutting efficiency, regularly remove debris from the teeth of the hole saw.
- FAQ (Frequently Asked Questions)
- Q: What materials can I use this hole saw for?
- A: This hole saw is suitable for use with timber, plastic, and plaster only.
- Q: Can I use this hole saw to cut metal and fibre cement sheeting?
- A: No, this hole saw is not suitable for cutting metal and fibre cement sheeting.
- Q: What should I do to ensure the longevity of larger hole saws?
- A: It is recommended to use larger hole saws at slower speeds to maximize their lifespan. Additionally, make sure to regularly sharpen the pilot.
- Q: Is it necessary to wear goggles when using the hole saw?
- A: Yes, it is highly recommended to wear goggles for eye safety when using the hole saw.
- Q: How can I maintain cutting efficiency?
- A: To maintain cutting efficiency, regularly remove debris from the teeth of the hole saw.
Scope of use
- Suitable for materials: timber, plastic & plaster only
- Not suitable for cutting metal & fibre cement sheeting
Configuration list
- 13PCS Saw Blade:
- 3/4 “(19mm),7/8″‘ (22mm), 1-1/8” (28mm),
- 1-1/4″ (32mm), 1-1/2″ (38mm), 1-3/4″ (44mm),
- 2″ (51mm),2-11/16″ (68mm), 3″ (76mm),
- 3-1/2″ (89mm), 4″ (102mm),5″ (127mm), 6″ (152mm),
- 2PCS Mandrels
- 1PC Installation Plate
- 1PC Hex Key
- 1PC Package Box
Installation method
- See the picture on the right for specific installation methods.
Precautions for use
- The hole saw needs to be perpendicular tothe working surface when working.
- Note: Drilling cannot be performed at an angle, as this may cause damage to the drill bit.
- Different materials need to work at different speeds. Please work at the recommended speed.
Recommended Poerating
Recommended Poerating speed(RPM)
Note： Larger hole saws are recommended to use at a slower speed to maximise life. Ensure pilots are sharpened regularly.
- For your eye safety, it is recommended to wear goggles when using
- Remove debris from teeth for cutting efficiency
Read User Manual Online (PDF format)
Loading......