ThermoPro TP25 Bluetooth Meat Thermometer User Guide

: June 14, 2024
: ThermoPro

Table of Contents

ThermoPro TP25 Bluetooth Meat Thermometer
Introduction
Features
Components
Usage
FCC STATEMENT
WARRANTY
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ThermoPro TP25 Bluetooth Meat Thermometer

Introduction

Congratulations on your purchase of a Smart, Wireless Bluetooth-connected Cooking Thermometer.
You will now be able to remotely monitor the temperature of food and how much time is left for the food to be done from your smartphone.

Features

ThermoPro-TP25-Bluetooth-Meat-Thermometer-FIG-1

Temperature Range of Probe: 14°F to 572°F (-10°C to 300°C).
Temperature Tolerance of Internal Food Reading: ‡1.8°F(‡1.0°C) from 32°F to 212°F(0 to 100°C), otherwise ‡1.5%.
Power Source: Buit-in lithium rechargeable battery.
Display the temperature of 4 probes.
2.4GHZ wireless Bluetooth function, Connect to mobile app via Bluetooth module.
Touch Backlight: Touch the LIGHT button to the ON/OFF backlight.
°C/°F/ON/OFF: Press once to ON/OFF the unit, press and hold for 3 seconds to select the temperature unit.
Button: Press and hold for 3 seconds to ON/OFF the Bluetooth function. If the mobile app is not connected within 3 hours, the Bluetooth function will be turned off automatically and the Bluetooth symbol will disappear.
Wire Allows you to stand the unit on a tabletop or it can be reversed and used as a hanger.
Remote Range: 650FT(200M). The transmission range is based on tests at an ambient temperature of 77°F or 25°C without any obstructions or electromagnetic interference. Your range can vary depending on the number of obstructions and electromagnetic in your environment.

Components

1 x Transmitter
4 x Straight Probes
1 x USB Charging Cable
2 x Clips
1 x User Manual

Usage

Follow the simple steps below to set up your ThermoPro
Bluetooth Cooking Thermometer and help you cook like a pro!
Step 1: Download and install the “ThermoPro BBQ” App. Search for “ThermoPro BBQ” on the Apple Store for iOS devices or on the Google Play Store for Android devices. Download the App and install it on your smartphone.
Step 2: Enable Bluetooth on your smartphone under the smartphone Settings section. If your smartphone has Bluetooth enabled, you can skip this step.
Enable GPS & AutoRun for Android (for different brands, you may need to Google those specific instructions), or it will disconnect during the cooking process.
Step 3: Fully charge the ThermoPro Bluetooth Cooking Thermometer by connecting the USB charging cable provided to the 5V USB charger. 5V USB charger.

Note: If the output voltage of the adapter is larger than 5V, the thermometer will be unable to charge.

Step 4: Insert the temperature probes provided into the thermometer transmitter. Insert the 4 coloured probes into the matching coloured sockets. For example, a dark blue probe connector into a dark blue socket.
Step 5: Turn on the thermometer transmitter by pressing the button once on the back of the transmitter unit. The Bluetooth icon will be flashing at the top of the transmitter display.
Step 6: Launch the ThermoPro BBQ APP and press Start. Wait a moment while the thermometer pairs with your smartphone. Once pairing is complete, the Bluetooth icon on the thermometer transmitter display will stop flashing and the APP will jump to the Cooking page which shows the temperatures measured by the probes.
Done! Your ThermoPro Bluetooth Cooking Thermometer is ready for use!
Any questions or need more help with setup, please feel free to contact us.

FCC STATEMENT

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users’ authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity
Hereby, the manufacturer declares that this product complies with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU, and the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at:
https://buythermopro.com/eu-declaration-of-conformity/.

Disposal of the Electronic Appliance

This electronic appliance should not be disposed of with normal household waste.
Dispose of the unit at an approved facility or your local recycling centre.
Please observe the current rules and regulations when disposing of the appliance.

WARRANTY

Limited One-Year Warranty

ThermoPro warrants this product to be free of defects in parts, materials and workmanship for one year, from the date of purchase.
Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to ThermoPro.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.