Keychron Q2 Pro Wireless Custom Mechanical Keyboard User Guide
- June 14, 2024
- Keychron
Table of Contents
Keychron Q2 Pro Wireless Custom Mechanical Keyboard User Guide
KEYBOARD INSTRUCTION
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps
Connect Bluetooth
**Switch toge to Biuetooth
**
Press fn + Q (for 4 seconds) and pair with device named Keychron Q2 Pro.
Connect Cable
**Switch toggle to Cable
**
The VIA Key Remapping Software
Please visit caniusevia.com to downioad the latest VIA software to remap the keys. Ifthe VIA software cannot recognize your keyboard, piease reach out to our support to get the instruction. (VIA only works when the keyboard is connected by wire to the computer)
The Layers
There are five layers of key settings on the keyboard. The layer O is for the Mac system. The layer 1 is for the Windows system. The layer 2 is for the Mac Multimedia keys. The layer 3 is for the Windows Multimedia keys. The layer 4 is for the Function keys.
If your system toggle in switched to Mac, then the layer 0 will be activated.
If your system toggle is switched to Windows, then the layer 1 will be activated.
Multimedia Key and Function Key
Multimedia keys
Function keys
In order to get Multimedia Key, you need to press fn1 and
Key.
In order to get Function Key, you need to press fn2 and
Key.
The Backight
Pres il + A to change the lghting effect
Press fn1+ caps lock to turn the backlight on/off
Adjust The Backlight Brightness
Press fn1 + S to increase the backlight brightness
Press fn1 + X to decrease the backlight brightness
Warranty
The keyboard s highly customizable and easy to be rebuilt If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
Watch The Buying Tutorial Oar Website
1f you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website fist, then start building the keyboard yourself.
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Plug in the power cable and switch the keyboard to Cable mode. 2 Factory reset the keyboard by
- pressing fn2+J+Z (for 4 seconds)
- Download the right firmware and QMK Toolbox from our website.
- Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the
- PCB. Hold the reset key first, then switch the keyboard to Cable mode. Release the reset key, and the keyboard will now enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard again by pressing fr2+J+Z (for 4 seconds).
- Step by step guide can be found on our website.
Download the JSON file in the link below if VIA does not automatically recognize keymap of the Q2 Pro:
https://www.keychron.com/blogs/archived/how-to-factory-reset-or-flash-your-
qmk-via-ena
bled-keychron-q2-pro-keyboard
VIA Software for macOS, Windows, Linux: https://usevia.app/#/
How to Use VIA on Your Keychron Q Pro Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your- keyboard
Q2 Pro Source Code, please search “source code” on the product page on our
official
website.
Documents / Resources
|
Keychron Q2 Pro Wireless Custom Mechanical
Keyboard
[pdf] User Guide
Q2 Pro Wireless Custom Mechanical Keyboard, Q2 Pro, Wireless Custom Mechanical
Keyboard, Custom Mechanical Keyboard, Mechanical Keyboard, Keyboard
---|---
References
- VIA
- How to use VIA to program your keyboard – Keychron | Mechanical Keyboards for Mac, Windows and Android
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>