MAXTOP CL-V11R RGB Video Lights Selfie Light User Manual
- June 14, 2024
- maxtop
Table of Contents
RGB LED Selfie Light
CL-V11R
User Manual
Preface
‘Thank you for choosing our RGB LED selfie light!
Our product s ultra-thin, compact, and easy to use. Its perfect for providing
RGB LED selfie light for your mobile phone, laptop or camera.
You have the freedom to adjust a wide range of color temperatures and
brightness levels to suit your preferences. Moreover, the built-in 2000mAh
battery provides around 7-8 hours of continuous lighting for regular use, and
up to 2 hours when operating at maximum power.
:Please read this manual carefully before use, and keep it for future
reference after reading.
Warning
- This product is not waterproof or dustproof.
- Avoid strong impacts to prevent damage.
- D0 not stare at the light-emitting surface for extended periods to avoid potential vision damage.
- Unplug the power cord after charging.
- If the product has not been used for a while, fully charge the battery before using it again to prevent power issues.
- We recommend charging and maintaining the battery every three months to extend it lifespan.
- The built-in rechargeable lithium battery has a limited lifespan, and its performance may decrease after a certain period of use. This s a normal occurrence.
The LED selfie light comes with a 12-month warranty, which begins from the date of purchase. Within this period, we offer refunds or replacements for any defective parts or products. For assistance, please contact our customer service team at info@maxtop.asia.
Product introduction
- Light Board
- UsB Type-C Charging Port
- Micro USB Charging Port
- value-
- value+
- Parameter Suitching
- Power /Mode Switch
- FrontClip
- Angle Adjustment Knob
- Display Screen
- Phone Holder
- Fixed knob
- 1/4Thread Hole
- cold Shoe Mount
Product installation
Front Clip
Itisfixed through 1/4 screw hole and can be fixed by screwing the knob.
(Compatible with other accessories linked by 1/4 screw)
Phone Holder
- Firstinstall the single leg of the phone holder into the slot on the back ofthe fill lamp
- Then push the phone holder towards the direction of both feet until the two feet of the phone holder are also installed in the slot of the. fill lamp
- Screw out the mobile phone mounting base of phone holder
- Place the mobile phone i the direction as shown in the figure
Function and disply
— CL-V11R
ON/OFF
Press and hold the power button for 3 seconds to turn on the selfie light. To
turn off the light, simply press and hold the power button for another 3
seconds.
Mode switching
Briefly press the power button to switch modes, CCT/HSV/ FX(special effect),
and three modes are switched.
| CCT(Color Temperature) | CT | Color temperature value: 2500K-9000K(±200K) |
|---|---|---|
| INT | 0-100% | |
| HSV(Colorful Mode) | INT | 0-100% |
| HUE | 0-359 (Full color) | |
| SAT | Saturation:0-100% | |
| FX(Special Effect Mode) | IDX | Types of FX:24 Scenarios |
| THE | Interval time/Frequency | |
| INV | 0-100% |
Parameter adjustment
in any mode, briefly press the “M” ke to switch between different parameters,
and use the “+”/”” keys to adjust the parameter values
FX(Special effect) mode
Support 24 kinds of special effects Briefly press the power button to switch
to FX(Special effect) mode.Press the “M” key to switch to IDX, and use the “+
and “- keys to adjust between 24 different scenarios,
Charge
When using Type-c or Micro-usb interface to charge, the battery indicator
willflash in flowing water,when the indicator is no longer flashing, it means
that the charging is completed.
Specifications
| Model | CL-V11R |
|---|---|
| CCT | 2500K-9000K (±200K) |
| Brightness | Brightness adjustment range: 0-100% |
| LED Qty | RGB:30pcs BI: 48pcs |
| Illuminance (lux) | Warm light |
| Distance | 0.3m |
| 0.5m | 350 |
| CRI | .?:-95 |
| TLCI | .?:-97 |
| RGB (HSV) | 0-359 (Full color) |
| Special effect | 24 Scenarios |
| Battery | 3.7V 2000mAh (7.4Wh) |
| Power | 5W |
| Input | 5V/1A |
| Charging port | Type-C/Micro-usb |
| Fixed interface | 1/4 screw hole,front clip,and phone holder, cold shoe mount |
| Size | 1047511.8mm |
| Weight | About 104g |
| Accessories | 1 x Selfie Light |
1 x Front Clip
1 x Phone Holder
1 x Cold Shoe Mount
1 x USB Type-C Charging Cable 1 x User Manual
The LED selfie light comes with a 12-month warranty, which begins from the date of purchase. Within this period, we offer refunds or replacements for any defective parts or prodicts. For assistance, please contact our customer service team at info@maxtop.asia.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>